VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus P102923 sensor and magnet kit assembly is intended for AA150, AA550, AA560, AA601, AA710, and AA730 series products and supports correct sensor installation for rode counter operation. The kit uses prefitted waterproof connectors to allow installation without soldering and is specified as a Maxwell sensor and magnet kit. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P104751 windlass cap component is specified for the Maxwell 2200 windlass system and is supplied with an 80mm cap size. Identified by part number P104751, it is intended as an essential service and maintenance item to support correct windlass functionality. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P105521 foot-operated control switch is a Maxwell footswitch intended for hands-free actuation of marine equipment, including windlasses, thrusters, and other electrical systems where foot control is required for tasks such as anchoring and maneuvering. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P12072 electric motor unit is a 12 V, 1000 W motor intended for marine applications. It is supplied with a Vetus Maxwell 4 hole flange and is specified as a universal-fit replacement that can substitute motors originally equipped with a 2 bolt flange. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P12073 electric motor assembly is rated at 12V with a 1200W power output and is specified for use with the Vetus Maxwell 2200 Series. It is supplied with a 4-bolt flange (universal fitting) and is stated to replace original 2-bolt flange motors for integration in marine applications. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P12074 electric motor unit is a 24 VDC, 1200 W drive motor manufactured by Vetus Maxwell and specified to fit the VWC3500 system. Supplied as a marine equipment motor for replacement or upgrade, it is intended to provide reliable operation with seamless integration on VWC3500 installations. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P12436 gearbox unit is engineered for the Maxwell HWC 1500 windlass series and is specified with a 56:1 gear ratio. Intended for windlass power transmission in marine anchoring applications, this gearbox supports smooth and reliable windlass system operation as a driveline component within the HWC 1500 setup. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P12487 Maxwell engine bolt component is intended to secure a boat’s marine engine by providing a stable fastening point within the propulsion installation. The input specifies precision engineering and construction from high-quality materials, supporting a secure and stable engine connection during maintenance or propulsion system upgrades. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P14077 hydraulic bow thruster unit (Maxwell 3500 VWC series) is specified with a thrust power of 100 and uses HYD (hydraulic) drive. It incorporates ACW (Anti-Cavitation Propeller) technology to reduce cavitation during operation and is supplied with CR (Remote Control) functionality for vessel maneuvering in marine applications. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P14099 hydraulic anchor winch unit is the Maxwell VW2200 model intended for hydraulic operation on marine vessels. Identified by item number P14099, it is specified as an anchor-handling winch designed for use in marine environments. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P14180 upper clutch disc component is intended for clutch engagement within VWC5000-6000 windlass systems. Identified as the upper disc in the clutch stack, it supports smooth operation by enabling precise and efficient clutch engagement in the windlass assembly. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P14295 Maxwell HWC3500 hydraulic windlass unit is part of the Maxwell HWC Series and is intended for automatic horizontal handling of chain-only anchor rods. It incorporates a hydraulic motor with fully automatic chainring operation in one or two directions, plus an independent stainless steel warp drum for front and rear rope pulling. The cone-shaped clutch/brake mechanism supports manual anchoring in “free fall” with smooth, progressive engagement, and the chain ring and warping drum are chrome-plated over marine bronze within a seawater-resistant alloy housing that is pre-treated, powder-coated, and finished in white two-component polyurethane paint for marine service. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P14368 hydraulic motor unit is a Maxwell hydraulic motor intended for marine hydraulic system service, including propulsion-related duties and other onboard hydraulic functions. It is described as precision engineered with durable construction to support reliable operation across varied marine applications. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P19221 up/down remote control unit is a Maxwell control interface intended for installation on a 24V instrument board. It provides up/down actuation control from the instrument board as part of onboard system operation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus P20040 clutch nut handle control lever is an accessory intended for Maxwell windlasses in the HRC series. Identified by product code P20040, it is used to adjust the windlass clutch nut for controlled operation and servicing of the windlass system. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus PM111B PM111 porthole assembly is a Category 1 hull-side opening unit with a black satin anodized aluminum frame and a “smoke” colored opening pane. It is specified with a clamp fixing mechanism to provide a flush external appearance with no visible fasteners, and the opening pane is described as providing UV protection. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus PZ651P porthole assembly is an aluminum portlight in the PZ651 series, supplied with a powder-painted black finish and an integrated mosquito net. It is specified as Type PZ651, rated Class A1, and has overall dimensions of 375x166mm for marine or architectural installations requiring ventilation with insect protection. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Vetus RCBP radio-control kit is a single-station thruster control solution for bow or stern thrusters, using a radio connection to eliminate cable installation between the thruster and the control panel. It is specified as compatible with both 12 Volt and 24 Volt electrical systems and is intended to simplify thruster operation in marine vessels and other applications. |
Our managers will contact you and clarify the terms of the order
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.