VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus BP27 shear pin component is a 3x18mm sacrificial safety element intended for BP100 applications in Vetus marine thruster systems. It is designed to break under excessive load to protect the bow thruster or related mechanisms from damage and is provided as a replaceable spare part for Vetus thruster installations. |
$ 2.88
-
+
|
|
1-2 weeks delivery time The Vetus BP275S drive pin set is supplied as a pack of five driving pins for Vetus BOW-series bow thruster units, specified for BOW50, BOW60, BOW75, BOW80, and BOW95 applications. The pins are listed as 5 x 27.5 mm and are intended as spare parts for Vetus marine thruster systems to support correct fitment and operation of the bow thruster drive arrangement. |
$ 40.21
-
+
|
|
1-2 weeks delivery time The Vetus BP287 tailpiece bearing unit is specified as a 15 x 32 x 9 mm bearing (D 15 x D 32 x 9mm) with SKF6002 quality, supplied as a spare part for Vetus marine thruster systems. It is intended to support smooth rotational movement under rotational forces in applications where dependable bearing performance is required. |
$ 17.23
-
+
|
|
1-2 weeks delivery time The Vetus BP29CON loose connector set is a male-female adaptor solution intended for extending bow-thruster cables in marine installations. Supplied as a set of 10 connectors, it is used to support cable extension work where a male-to-female adaptor interface is required within Vetus thruster system spare parts. |
$ 67
-
+
|
|
1-2 weeks delivery time The Vetus BP3007 parallel key component is a stainless steel torque-transmission key manufactured to DIN6885A with dimensions of 6x6x16 mm. Supplied as a spare part for Vetus marine thruster systems, it is specified for high durability and corrosion resistance in marine service. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus BP3016E electric motor assembly is a 12 V, 5.7 kW electromotor supplied as the motor only, without solenoid and other accessories, for Vetus BOW95 and BOW125DE thruster installations. It is specified as a spare part for Vetus marine thruster systems and intended for integration with the BOW95/125DE thruster range. |
$ 2,871.58
-
+
|
|
1-2 weeks delivery time The Vetus BP3017E electric motor assembly is a 24V, 5.7 kW electromotor supplied as the motor only, without solenoid or other accessories, for Vetus BOW95/125CE/DE maneuvering propulsion units. It is specified as a spare part for Vetus marine thruster systems and is intended for installation in BOW95/125CE series applications. |
$ 2,871.58
-
+
|
|
1-2 weeks delivery time The Vetus BP3019 bronze propeller unit is a thruster screw intended exclusively for the BOW28524 model and specified for a 300 mm tunnel diameter. Supplied as a spare part for Vetus marine thruster systems, it is manufactured in bronze, and the protective anode is not included and must be ordered separately. |
$ 1,244.36
-
+
|
|
1-2 weeks delivery time The Vetus BP3078 relay cover cap is a protective accessory for large relays used in Vetus BOW-series bow thruster systems, including the BOW285 C CE configuration. It is intended to shield the relay from external elements and environmental factors and is specified as a spare part for Vetus marine thruster installations, with a precise-fit cover design for the applicable relay sizes. |
$ 20.97
-
+
|
|
1-2 weeks delivery time The Vetus BP34 fiber ring component is a replacement part for bow thruster systems, specified as a fiber ring with dimensions 8.5 x 14 x 1. Intended for integration in various bow thrusters, it is supplied within the spare parts range for Vetus marine thruster systems to support smooth operation under marine service conditions. |
$ 3.35
-
+
|
|
1-2 weeks delivery time The Vetus BP35 circlip component is a DIN 6799-compliant retaining ring specified for Vetus bow propeller (bow thruster) applications. Intended to support secure assembly within the bow thruster system, this precision-engineered circlip is supplied as a spare part for Vetus marine thruster installations. |
$ 3.74
-
+
|
|
1-2 weeks delivery time The Vetus BP37 securing clip is a fastening component referenced for BSCHROEF and BSCHR24, supplied as a spare part for Vetus marine thruster systems. It is intended to provide secure retention of installed parts where a dependable clip-type fastener is required. |
$ 7.66
-
+
|
|
1-2 weeks delivery time The Vetus BP37424 relay module is a 24V electrical switching component identified as model SW202N-374 and specified for BOW22024 ER applications. Supplied as a spare part for Vetus marine thruster systems, it is intended to provide reliable switching performance in 24V circuits. |
$ 564.74
-
+
|
|
1-2 weeks delivery time The Vetus BP381 drive pin set is a replacement propeller drive pin kit for BOW50 and BOW80 bow thrusters manufactured before 1998, specified for motor numbers TF12 or RC125. The set contains five drive pins, each with a stated diameter of 4 mm (noted as 24x4 in the item text), intended to ensure secure propeller drive pin installation for reliable bow thruster operation. |
$ 33.18
-
+
|
|
1-2 weeks delivery time The Vetus BP39 paper gasket is a sealing component intended to prevent leaks by providing a secure gasketed interface. Supplied as a spare part for Vetus marine thruster systems, this paper gasket is specified for reliable sealing service in applicable installations. |
$ 2.30
-
+
|
|
1-2 weeks delivery time The Vetus BP43 shim washer is a precision spacing component sized 19 x 26 x 0.1 mm, manufactured to DIN988 for tolerance control and alignment in mechanical assemblies. Intended as a spare part for Vetus marine thruster systems, it is specified for accurate calibration and adjustment where controlled spacing is required. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus BP4504B intermediate flange assembly is a replacement component for the BOW45 maneuvering system, supplied as a spare part for Vetus marine thruster installations. It is specified as the black BOW45 intermediate flange and is finished in Alu Black RAL9005. |
$ 92.85
-
+
|
|
1-2 weeks delivery time The Vetus BP4504BI intermediate flange assembly is a replacement component for the Bowthruster 45 kgf IP system, specified for the black 45 IP intermediate flange position. Supplied as a spare part for Vetus marine thruster systems, it is intended to maintain correct fit and functional interfacing within the thruster assembly through precision-engineered construction. |
$ 92.85
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.