VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus BP18541 motor fan housing assembly is an ABS replacement component in blue for Vetus bow thrusters, intended to support correct airflow around the motor to help maintain operating temperature. Supplied as a spare part for Vetus marine thruster systems. |
$ 57.44
-
+
|
|
1-2 weeks delivery time The Vetus BP18626 busbar connection rail is a copper power distribution component with a nickel-plated finish for bow thruster electrical systems. It is specified as a conductive connection interface for electrical components, combining copper conductivity with nickel-plated corrosion resistance for marine installations. |
$ 114.86
-
+
|
|
1-2 weeks delivery time The Vetus BP18629 busbar connection assembly is a nickel-plated copper electrical distribution component intended for Vetus bow thruster systems. It provides a stable, durable connection point to support efficient power distribution within the thruster electrical circuit. |
$ 114.86
-
+
|
|
1-2 weeks delivery time The Vetus BP18655 connection adapter component is manufactured from copper with a nickel-plated finish to support corrosion resistance and service life in marine environments. Intended as a spare part for Vetus marine thruster systems, it is used to provide a secure connection within bow thruster system installations. |
$ 47.86
-
+
|
|
1-2 weeks delivery time The Vetus BP18808 MCV(B) printed circuit board module is a third-generation control PCB supplied without pins for ELINE and EAIR advanced thruster installations. Intended as a spare part for Vetus marine thruster systems, it provides control and functionality for bow thrusters and is specified as optimized for bow thruster applications. |
$ 95.73
-
+
|
|
1-2 weeks delivery time The Vetus BP189 parallel key component to DIN6885A is an 8 x 7 x 25 mm steel machine key used to secure rotating elements such as gears and pulleys to a shaft for reliable torque transmission. Manufactured with uniform dimensions and precise tolerances, it is listed as a spare part for Vetus marine thruster systems and specified for BOW125, BOW130 and BOW160 applications. |
$ 7.66
-
+
|
|
1-2 weeks delivery time The Vetus BP19028 intermediate flange component is specified for 400mm tunnel installations in Vetus bow thruster systems and is compatible with BOWH410 and BOWH550 models. It is used to provide a secure, stable connection within the thruster installation as part of the Vetus marine thruster spare parts range. |
$ 258.44
-
+
|
|
1-2 weeks delivery time The Vetus BP19036 flexible coupling assembly is intended for BOWB bow thruster installations with a 400mm tunnel. It supports smooth operation of the thruster drivetrain while reducing operational stress transferred to other bow thruster system components, with compatibility specified for 400mm tunnel applications. |
$ 287.16
-
+
|
|
Vetus BP194B - Intermediate Flange for BOW160 Bow Thruster Systems, Aluminum, Black Finish (RAL9005)
1-2 weeks delivery time The Vetus BP194B intermediate flange component is intended for installation in the Vetus BOW160 series bow thruster system. It is manufactured from aluminum and supplied with a black finish specified as RAL9005 (also referenced as RAL900 in the provided documentation), supporting secure fitment as part of the bow thruster installation arrangement. |
$ 181.86
-
+
|
|
1-2 weeks delivery time The Vetus BP194EB intermediate flange component is intended for Vetus marine thruster maneuvering systems, specified for the BOW160DE application and referenced for BOW18024D. It is used as an essential interface part to support installation and operation of the bow thruster arrangement in marine environments. |
$ 220.15
-
+
|
|
1-2 weeks delivery time The Vetus BP198 shear pin and securing spring kit is a spare parts set consisting of two shear pins and one securing spring for Vetus BOW50 bow thruster systems. Supplied as a maintenance/repair kit for the BOW50 thruster, it provides the specified securing and sacrificial pin components used to support reliable operation within the thruster drive arrangement. |
$ 19.15
-
+
|
|
1-2 weeks delivery time The Vetus BP20132 intermediate flange assembly is intended for the 140 mm AC Blue BOWA0401 model and is used as a connection interface within Vetus bow thruster systems. It supports stable and secure installation by providing reliable connections in bow thruster applications and is supplied as a spare part for Vetus marine thruster systems. |
$ 105.29
-
+
|
|
1-2 weeks delivery time The Vetus BP2019231 intermediate flange assembly is a connection interface for the 300mm AC Blue bow thruster configuration, intended to provide a stable mechanical connection between system components to support bow thruster performance and overall installation stability. It is listed as a spare part for Vetus marine thruster systems and is referenced for BOWB285, BOWB300, and BOWB320 applications. |
$ 248.88
-
+
|
|
1-2 weeks delivery time The Vetus BP203 gasket assembly (Version III) is a sealing component specified for the BOW2312 thruster unit in Vetus marine thruster systems. It is intended to provide a secure seal to help prevent leakage at the applicable joint interface during thruster operation and service replacement. |
$ 2.39
-
+
|
|
1-2 weeks delivery time The Vetus BP206 sealing O-ring is a 33x2 mm elastomer ring specified for the Vetus BOW2312 system and intended to provide leak-tight sealing in marine service. The input data lists dimensions (h x w x d) of 38 mm x 18 mm x 2 mm, with black, corrosion-resistant elastomer construction, 70 Shore A hardness, and a stated temperature range of -40°C to 120°C. It is described as suitable for high-pressure marine systems and resistant to oils, fuels, and lubricants typically found in marine environments. |
$ 7.66
-
+
|
|
1-2 weeks delivery time The Vetus BP210 carbon brush holder assembly is a bow thruster electrical component intended for BOW5012 and BOW5024 units manufactured from 1994 onwards. It provides secure retention and housing of the carbon brushes to maintain consistent contact for reliable power transmission within the thruster system. |
$ 40.21
-
+
|
|
1-2 weeks delivery time The Vetus BP214A contact block module is a precision-engineered spare part intended for the BPJST joystick, providing the internal contact function required for reliable and responsive operation of the joystick system. It is specified as a component within Vetus marine thruster system spare parts and is designed exclusively for the BPJST control application. |
$ 10.53
-
+
|
|
1-2 weeks delivery time The Vetus BP21643 tailpiece gasket is a sealing component for 400mm tunnel systems used in Vetus bow thruster installations. It is intended to provide a tight seal at the tailpiece interface to prevent leaks, supporting system efficiency and operational safety in marine thruster applications. |
$ 14.36
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.