VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus BP4507 nylon filler plate component is a spare part manufactured for the BOW4512D manoeuvring system. Produced in nylon, it is intended as a replacement element to support smooth operation and straightforward installation within Vetus marine thruster manoeuvring system assemblies. |
$ 6.23
-
+
|
|
1-2 weeks delivery time The Vetus BP48A bevel gear assembly (Z27, model 252-671) is a drivetrain component for the Vetus BOW50 bow thruster system. Manufactured by Vetus as a spare part for marine thruster systems, it uses a 27-tooth bevel gear design intended to support smooth and efficient operation within the thruster mechanism. |
$ 54.56
-
+
|
|
1-2 weeks delivery time The Vetus BP5552 motor set assembly is a replacement drive motor set for the STE5512D bow thruster (Swingthruster) system. Specified for a 12V installation and associated with a 150mm thruster configuration and 55kg thrust rating, it is supplied as a spare part for Vetus marine thruster systems to restore and maintain thruster functionality. |
$ 1,292.21
-
+
|
|
1-2 weeks delivery time The Vetus BP55A radial-lip oil seal assembly is specified as a D14x22x4 shaft seal for the drive shaft on Vetus BOW23, BOW23A, BOW50, and BOW80 thruster lower legs. It is manufactured from NBR (nitrile) and uses a stainless steel spring/insert to maintain sealing contact, supporting oil retention and reliable sealing performance in Vetus marine thruster system service. |
$ 28.71
-
+
|
|
1-2 weeks delivery time The Vetus BP60 carbon brush set is a replacement brush kit consisting of four carbon brushes sized 10x25x28 mm, specified as c843. It is intended for Vetus bow thruster applications including BOW5012, and for BOW5024 bow thruster models produced until 1986, supporting service replacement to maintain thruster motor operation. |
$ 258.44
-
+
|
|
1-2 weeks delivery time The Vetus BP62 hose connection fitting is specified as a 1/8 BSP to 8 mm connection component for marine hose interfaces. It is intended to provide a secure fit for hose connections in marine applications and is listed within spare parts for Vetus marine thruster systems. |
$ 15.32
-
+
|
|
1-2 weeks delivery time The Vetus BP65S shear pin set is a safety protection component for the BP65 bow thruster, supplied as 5 pieces and specified with a 3x23mm pin size (also referenced as 3x23.3mm in the set description). The shear pins are intended to break under excessive force or obstruction loads to help prevent damage to internal thruster components and provide a straightforward replacement option within Vetus marine thruster systems. |
$ 32.77
-
+
|
|
1-2 weeks delivery time The Vetus BP68 locking fastener is an M5 x 16 mm stainless steel lock-screw with a concealed head, supplied as a spare part for Vetus marine thruster systems. Specified as an old BOW45 and BP02 propeller securing screw, it is intended for secure fastening where corrosion resistance and durability are required in marine environments. |
$ 4.31
-
+
|
|
1-2 weeks delivery time The Vetus BP7552 motor set assembly is a replacement electric drive component for the STE7512D bow thruster in Vetus Swingthruster configurations specified as 185 mm, 75 kg, 12 V. Supplied as a spare part for Vetus marine thruster systems, it is intended to maintain correct thruster operation during service. |
$ 1,627.23
-
+
|
|
1-2 weeks delivery time The Vetus BP824 electric motor assembly is a 24 V, 3 kW drive motor specified for the Vetus BOW50 propulsion unit. Supplied as an electric motor without switch/solenoid, it is stated as suitable for the BOW5024 model year range from 01-04-1995 to 01-08-2000 and is identified with motor type R125/3 - 677/634 (Bow 50 Vers.97ce). |
$ 1,531.51
-
+
|
|
1-2 weeks delivery time The Vetus BP90S propeller service kit with mounting hardware is a spare parts set intended for maintenance of Vetus BOW2312 bow thruster systems (23 Kgf). Supplied as a repair kit including a new propeller, it is specified for restoring operational performance on the compatible bow thruster installation. |
$ 172.30
-
+
|
|
1-2 weeks delivery time The Vetus BP92 gasket element is a sealing component specified for the BOW2312, providing a tight and secure fit for marine equipment. Supplied as a spare part for Vetus marine thruster systems, it is intended to support sealing integrity in the applicable installation. |
$ 7.66
-
+
|
|
1-2 weeks delivery time The Vetus BP94 double-pole 12V solenoid switch pack is a bow thruster electrical spare part intended to upgrade or replace the solenoid on Vetus BOW23 and BOW23A installations. It is specified for earlier BOW2312 thrusters configured with a tunnel-mounted ZINK02 anode and is supplied as a pack containing a single square-sided solenoid. |
$ 421.16
-
+
|
|
1-2 weeks delivery time The Vetus BP9550EB intermediate flange assembly is a black replacement component intended for the BOW9512DE maneuvering system (BOW95DE series). Engineered as a dedicated intermediate flange, it is specified for seamless compatibility and reliable performance in marine thruster maneuvering applications. |
$ 124.44
-
+
|
|
1-2 weeks delivery time The Vetus BP9552 motor set assembly is a 12 V engine set intended for the Vetus Swingthruster system. The unit is specified for a 185 mm Swingthruster application and is listed with a 95 kg rating in the provided product data, supplied as a spare part for Vetus marine thruster systems. |
$ 2,584.43
-
+
|
|
1-2 weeks delivery time The Vetus BP9554 motor set is an engine set for Vetus Swingthruster systems, specified for 24V operation and identified for the 185mm / 95kg configuration. Supplied as a spare part for Vetus marine thruster systems, it is described as providing dependable thrust and high efficiency for boating requirements. |
$ 2,584.43
-
+
|
|
1-2 weeks delivery time The Vetus BPACCSU electronics cover assembly is a complete protective cover intended for AC thruster electronics in manoeuvring applications. Supplied as a spare part for Vetus marine thruster systems, it is specified as the replacement element Cover BOWA and is described as providing protection of sensitive electronics against moisture and debris. |
$ 181.86
-
+
|
|
1-2 weeks delivery time The Vetus BPACCSUB MCVB cover assembly is an interface and protection component for Type 2 control panels used in marine applications, including Vetus thruster control installations. It provides protection against accidental or unauthorized operation and uses LED indication for on/off status. The assembly incorporates LED and buzzer warnings for continuous operation exceeding 2 minutes, includes control-circuit overload protection, and is specified as waterproof for durability in marine environments. |
$ 191.44
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.