VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus WC004 drainage kneepiece replacement component is a spare part for Vetus marine waste water systems, intended as a replacement element for the drainage kneepiece in marine toilet installations. It is specified for compatibility with the WCS1, WCL1, and SAPRO toilet models and supports efficient waste water drainage to maintain correct toilet system operation. |
$ 52.64
-
+
|
|
1-2 weeks delivery time The Vetus WC005 solenoid valve assembly is a 12V water inlet control component intended as a replacement part for Vetus marine toilets, supporting regulated water flow during operation. It is specified for Vetus WCS, WCL, SMTO, and HATO series toilets, and is stated as suitable for Series 1 and Series 2 models within Vetus marine waste water systems. |
$ 59.83
-
+
|
|
1-2 weeks delivery time The Vetus WC0054 solenoid valve assembly is a 24V water inlet control component supplied as a replacement part for Vetus marine toilet systems. It is specified for compatibility with Vetus WCS, WCL, SMTO, and HATO toilets across Series 1 and Series 2 (Vers. 1+2) and is listed within spare parts for Vetus marine waste water systems. |
$ 59.83
-
+
|
|
1-2 weeks delivery time The Vetus WC007 non-return valve holder component is intended for Vetus WCS1, WCL1, and SAPRO toilet installations to support backflow-free operation within the marine sanitation system. It is specified as compatible with the Vetus WC008 non-return valve and is supplied as a spare part for Vetus marine waste water systems. |
$ 31.59
-
+
|
|
1-2 weeks delivery time The Vetus WC008 non-return check valve is a one-way flow component for Vetus marine sanitation toilet systems, specified for WCS1, WCL1, and SAPRO installations. Identified as part “A” in the operation manual, it is used to prevent water backflow within the system and is supplied as a spare part for Vetus marine waste water systems. |
$ 32.45
-
+
|
|
1-2 weeks delivery time The Vetus WC009 pneumatic switch assembly is a replacement control component for Vetus Series 1 electric marine toilets, specified for WCS1, WCL1, SMTO1, and HATO1 installations. It provides pneumatic actuation for toilet system operation and is supplied as a spare part within Vetus marine waste water system support. |
$ 59.83
-
+
|
|
1-2 weeks delivery time The Vetus WC012 motor set is a 12V replacement drive unit supplied as a complete assembly including the pump and macerator for Vetus WCS and WCL 1 Series toilet systems (Type 1). The unit is specified with a white, on-toilet-bowl, air-operated switch and is supplied as a spare part for Vetus marine waste water system installations. |
$ 1,005.06
-
+
|
|
1-2 weeks delivery time The Vetus WC012L motor-driven set is a 12V assembly supplied with the WCL1 pump and a macerator for marine waste management system service. The set is intended for effective waste processing in marine applications and is categorized as a spare part for Vetus marine waste water systems. |
$ 1,005.06
-
+
|
|
1-2 weeks delivery time The Vetus WC024 motor set is a 24V replacement drive assembly supplied complete with pump and macerator for Vetus WCL1 and WCS1 marine toilets. It is specified for toilets in the WCS and WCL 1 Series and is compatible with models equipped with a white, on-toilet-bowl, air-operated switch. |
$ 1,005.06
-
+
|
|
1-2 weeks delivery time The Vetus WC024L 24V motor set assembly is supplied as a комплектed unit including the WCL1 pump and an integrated macerator for marine waste management system service. This set is intended for efficient waste processing in marine environments and is categorized as a spare part for Vetus marine waste water systems. |
$ 1,005.06
-
+
|
|
1-2 weeks delivery time The Vetus WC11001 magnetic valve assembly is a replacement component for Vetus WC110L and WC110S electric toilets used in marine waste water systems. It is specified for 110V operation and is intended to support reliable water flow within the toilet system, with installation described as straightforward for integration into existing equipment. |
$ 52.64
-
+
|
|
1-2 weeks delivery time The Vetus WC11002 motor, pump, and macerator assembly is a combined drive and discharge unit for Vetus WC110L and WC110S marine toilets. It is specified with super-quiet operation, a high-capacity discharge pump for waste removal, and stainless steel (AISI 316) macerator blades for durability in marine waste water system service. |
$ 976.34
-
+
|
|
1-2 weeks delivery time The Vetus WC11002L motor, pump, and macerator unit is intended for marine toilet waste management systems and is specified for the WC110L arrangement. Supplied as a spare part for Vetus marine waste water systems, it combines the drive motor with the pump and macerator functions for marine vessel installations. |
$ 976.34
-
+
|
|
1-2 weeks delivery time The Vetus WC22001 printed circuit board module is a 220V PCB intended as a spare part for Vetus electric toilet systems, supporting correct operation of compatible WC220L, WC220S, WCS, WCL, and HATO units within Vetus marine waste water installations. |
$ 181.86
-
+
|
|
1-2 weeks delivery time The Vetus WC22001H printed circuit board assembly is an electrical control component for the HATO220 marine toilet, intended to manage and control the toilet system’s functions on a 220V power supply. It is supplied as a spare part for Vetus marine waste water systems and supports reliable operation by providing the required electronic control for the toilet unit. |
$ 181.86
-
+
|
|
1-2 weeks delivery time The Vetus WC22002 electric valve unit is a 230 VAC water-supply control component for Vetus WC220L and WC220S marine toilets. Used within Vetus marine waste water systems, it manages water flow to support efficient water supply operation in the WC220L/WC220S toilet installation. |
$ 52.64
-
+
|
|
1-2 weeks delivery time The Vetus WCL001 toilet seat and lid set is a WCL-toilet-specific assembly incorporating a soft-close closing mechanism and a quick-release interface for simplified removal during cleaning and maintenance. Supplied as a complete seat with cover, it is intended as a spare part for Vetus marine waste water system installations using Vetus WCL toilets. |
$ 134.01
-
+
|
|
1-2 weeks delivery time The Vetus WCS001 toilet seat and cover assembly (Type WCS) is an accessory intended for marine sanitation installations and designed to complement Vetus marine toilets. Manufactured from quality materials for durability and resilience in maritime conditions, this seat-and-cover set is supplied within the spare parts range for Vetus marine waste water systems. |
$ 172.30
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.