VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus BP105O frontfoil panel assembly is a bow thruster system component for Bowprop 2 (PANBS2) installations. Identified by product code BP105O, it is intended to support precise control and maneuverability of the vessel when operating the bow thruster system and is supplied as a spare part for Vetus marine thruster systems. |
$ 23.93
-
+
|
|
1-2 weeks delivery time The Vetus BP1068 spacer component is a precision-engineered accessory for Vetus BOW220 marine thruster systems, specified with a diameter of 300 mm. It is intended to optimize equipment fit and operational alignment within the BOW220 setup and is supplied as a spare part for Vetus marine thruster installations. |
$ 13.40
-
+
|
|
1-2 weeks delivery time The Vetus BP1069 sealing gasket is a tail piece gasket specified for the lower part of Vetus BOW310 and BOW28548 bow thruster assemblies and is suitable for BOW220 kgf bow thruster applications. It is supplied as a spare part for Vetus marine thruster systems to provide a secure seal in the lower section and support correct thruster operation. |
$ 11.49
-
+
|
|
1-2 weeks delivery time The Vetus BP1070 flange gasket is a sealing component specified for the flange interface on Bow220 bow thruster installations, intended to provide a secure, leak-free connection. Supplied as a spare part for Vetus marine thruster systems, it is described as durable and wear-resistant and is intended for straightforward replacement on Bow220 bow thrusters. |
$ 13.40
-
+
|
|
1-2 weeks delivery time The Vetus BP1074 flexible coupling component is intended for Vetus bow thruster systems and is specified for compatibility with the BOW22024 and BOW28548 models. It provides a flexible, durable connection between mating components to support smooth and efficient bow thruster operation and is supplied as a spare part for Vetus marine thruster installations. |
$ 268.01
-
+
|
|
1-2 weeks delivery time The Vetus BP1076B intermediate flange component is a precision-engineered connection interface for Vetus BOW thrusters from BOW220 to BOW310. It is specified as AISI12 with a black RAL9005 finish described as aluminum black, and is supplied as a spare part for Vetus marine thruster systems to provide a stable intermediate connection point in the thruster assembly. |
$ 229.73
-
+
|
|
1-2 weeks delivery time The Vetus BP1079 relay cover cap is a protective solenoid/relay cover component intended exclusively for the Vetus BOW220 bow thruster system. Supplied as a spare part for Vetus marine thruster systems, it is specified with a 300 mm tube and is used to safeguard the relay against environmental exposure and damage. |
$ 13.40
-
+
|
|
1-2 weeks delivery time The Vetus BP1085 sealing ring is an O-ring specified at 44.17 x 1.78mm for tailpieces sized 50/80 in Vetus marine thruster systems. Manufactured from high-quality rubber, it is intended to provide a secure seal to prevent leakage and maintain efficient operation, with stated resistance to water, oils, and fuels. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus BP1119 nylon spacer fitting is a bow thruster sealing component intended to provide a watertight connection in Vetus thruster installations. Manufactured from nylon, it is specified for use with BOW60, BOW75, BOW80, and BOW95 bow thruster models and is supplied as a spare part for Vetus marine thruster systems. |
$ 9.58
-
+
|
|
1-2 weeks delivery time The Vetus BP112 strip set is a collection of multiple precision-crafted strips intended for marine and boating applications, including sealing, insulation, and reinforcement tasks. Supplied as a spare part for Vetus marine thruster systems, this set is specified as durable and designed to support installations and repairs where strip materials are required. |
$ 7.66
-
+
|
|
1-2 weeks delivery time The Vetus BP1125 mounting material kit is an all-inclusive installation hardware set for the BOW 55 kgf bow thruster, specified for both 12V and 24V electrical systems. It is supplied as a spare-part set for Vetus marine thruster installations and includes mounting brackets, fasteners, and installation hardware to support secure thruster mounting. |
$ 23.93
-
+
|
|
1-2 weeks delivery time The Vetus BP1129 drive pin set is a replacement pin kit for Vetus bow thruster systems, specified for BOW35 and BOW55 units rated at 35 kgf and 55 kgf. The set contains 5 drive pins with a stated size of 5 x 45.5 mm for thruster servicing and maintenance within Vetus marine thruster installations. |
$ 34.37
-
+
|
|
1-2 weeks delivery time The Vetus BP1130 shear-pin set is a replacement fastener set for Vetus BOW5512/24A bow thruster installations rated at 55 Kgf, configured with a solid tunnel flange and two hex bolt motor attachment. Supplied as a set of 5 shear pins, each pin measures 25.6 mm x 4 mm and is intended to protect the thruster motor by shearing under excessive load in the drive system. |
$ 45.62
-
+
|
|
1-2 weeks delivery time The Vetus BP1138 mounting and installation kit set is intended for the Bow 35 KGF thruster (12V) and is supplied as an installation material package for Vetus marine thruster systems. The kit includes a holder with cover, a main 160 A slow-blow fuse, and an operation manual providing installation instructions; it is listed as New/Old Stock and sold exactly as pictured. |
$ 28.71
-
+
|
|
1-2 weeks delivery time The Vetus BP1140 isolation bolt is an insulated fastening component specified as M6 x 210 mm for the BOW 55 engine (bow propmotor 55 kgf). Intended for Vetus marine thruster system service, it functions as an insulation-related bolt to support secure operation in the designated application. |
$ 5.27
-
+
|
|
1-2 weeks delivery time The Vetus BP1148 intermediate flange component is intended for Vetus bow thruster installations and is specified for integration with BOW2512 systems. Supplied as a spare part for Vetus marine thruster systems, it supports fit-up between mating components within the bow thruster assembly. |
$ 38.29
-
+
|
|
1-2 weeks delivery time The Vetus BP1148B intermediate flange component is a replacement part intended for the BOW25 manoeuvring system. Manufactured in aluminum and specified in black (RAL9005), this intermediate flange supports correct assembly and operational reliability of the BOW25 unit within Vetus marine thruster systems. |
$ 47.86
-
+
|
|
1-2 weeks delivery time The Vetus BP1168 drive pin component is a propeller drive pin specified for the BOW2512 bow thruster, providing power transmission to the propeller for reliable thruster operation. Size is stated as D 4 x 31 mm, and it is supplied as a genuine Vetus replacement spare for Vetus marine thruster systems. |
$ 5.80
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.