VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus TMWB007B hose assembly is a 1-meter water supply line fitted with G3/4 straight connections for integration in Vetus marine waste water system installations. It is specified as a durable hose material intended to withstand pressure and wear in marine conditions while supporting dependable water flow and straightforward installation. |
$ 18.19
-
+
|
|
1-2 weeks delivery time The Vetus TMWB008 mounting hardware set is intended for installation of Vetus TMW12Q and TMW24Q toilets, providing the components required for secure and stable mounting. It is compatible with the soft-close seat and quick release mechanism, supporting straightforward installation and easier maintenance within Vetus marine waste water system applications. |
$ 12.44
-
+
|
|
1-2 weeks delivery time The Vetus TMWB112 12V macerator pump and motor assembly is a chopper pump for electric marine toilets, specified for use with Vetus TMW12Q and TMW24Q. It operates on 12 VDC and is supplied with a stainless steel AISI316 knife for waste maceration; the control box is not included. Classified as a spare part for Vetus marine waste water systems. |
$ 392.45
-
+
|
|
1-2 weeks delivery time The Vetus TMWB124 motor and macerator pump unit is a complete 24V assembly intended for the TMW24Q marine toilet, combining the drive motor with a macerator pump to break down waste for discharge. This spare-part assembly is equipped with a stainless steel AISI316 knife and is listed under spare parts for Vetus marine waste water systems. |
$ 382.88
-
+
|
|
1-2 weeks delivery time The Vetus UNICAP tank cap plug/socket assembly is a white, two-part replacement Tri-Sure Tankcap bung intended for use across all Vetus rigid tanks. Supplied complete with seals including an O-ring, it is specified as a spare part for Vetus marine waste water systems and is used as a tank cap interface component for ATANK applications. |
$ 17.23
-
+
|
|
1-2 weeks delivery time The Vetus USEAT2 toilet seat and cover assembly is a universal replacement component with a soft-close mechanism and quick-release functionality for Vetus WCP, WCS, and SMTO toilet models. Supplied as a spare part for Vetus marine waste water systems, it is intended to restore seat operation and facilitate installation and removal on the specified units. |
$ 143.58
-
+
|
|
1-2 weeks delivery time The Vetus VP000138 replacement bowl component is specified for the SMTO2 toilet and is supplied as a spare part for Vetus marine waste water systems. It is intended to maintain SMTO2 toilet functionality and hygiene, using a high-quality, durable construction and providing easy, seamless integration with the SMTO2 model for marine-environment service. |
$ 574.32
-
+
|
|
1-2 weeks delivery time The Vetus VP000147 mechanical seal (Dia 12) is a sealing component for 12 volt and 24 volt toilet motors, intended to prevent water leakage and maintain leak-free operation in marine toilet systems. It is described as a high-quality, durable construction suitable for marine conditions, including resistance to saltwater exposure and the mechanical stresses associated with toilet motor service, and is supplied within the spare parts range for Vetus marine waste water systems. |
$ 28.63
-
+
|
|
1-2 weeks delivery time The Vetus VP000152 push-button plug switch assembly is intended for Vetus AC toilets only and is used to control the toilet flushing mechanism. Supplied as a spare part for Vetus marine waste water systems, it features a user-friendly push button design with durable construction and is described as easy to install and maintain for onboard toilet operation. |
$ 36.28
-
+
|
|
1-2 weeks delivery time The Vetus VP000153 discharge hose assembly with integrated airvent is intended for Vetus electric toilet installations and is specified for WCS, WCL, and WCS2 units. It functions as a waste-discharge line to support efficient and hygienic overboard or holding-tank transfer, while the included airvent is provided to prevent airlocks and promote smooth flushing operation in marine environments. |
$ 105.29
-
+
|
|
1-2 weeks delivery time The Vetus VP000249 rubber outlet component is a marine toilet pump outlet part manufactured from high-quality rubber for WCPS and SMT02S installations. Intended for Vetus marine waste water systems, it supports efficient waste discharge while promoting effective sealing to prevent leaks and maintain system integrity under marine operating conditions, including exposure to water and varying temperatures. |
$ 26.14
-
+
|
|
1-2 weeks delivery time The Vetus VP000300 inlet elbow component is a spare part for Vetus TMW toilets used in marine waste water systems, providing an efficient water inlet connection for the toilet installation. Supplied as a replacement element, it is specified as durable plastic and is described as easy to install for service replacement on compatible TMW toilet assemblies. |
$ 19.15
-
+
|
|
1-2 weeks delivery time The Vetus VP000414 mounting gasket component is intended for the HATO..B series and is used to provide a reliable seal and secure fit in marine and industrial installations. It is described as being manufactured from high-quality materials with a precise design to support effective sealing against fluid leaks and to facilitate installation and maintenance within Vetus marine waste water system applications. |
$ 38.10
-
+
|
|
1-2 weeks delivery time The Vetus VP000415 electrical control box assembly is intended for WCP toilet installations to provide electrical control and management for panel operation. It is supplied as a spare part for Vetus marine waste water systems and is described as compact and robust for straightforward installation and integration, with components intended for safe electrical connections in marine environments. |
$ 438.40
-
+
|
|
1-2 weeks delivery time The Vetus VP000416 fastening set is a mounting hardware kit for the Vetus TMW toilet seat, intended to provide secure attachment and seating stability in marine and recreational vehicle sanitation installations. The set is supplied with the necessary components for installation and ongoing maintenance, and is specified as a spare part for Vetus marine waste water systems. |
$ 24.79
-
+
|
|
1-2 weeks delivery time The Vetus WC001 PCB timer/control board assembly is a replacement timer and cutter motor control PCB intended for Vetus Series 1 WCL and WCS electric marine toilets in 12/24 V configurations, including WCL1 and WCS1 installations. It is specified for the original-series toilets using an air pressure push switch control (not the three-button remote panel) and is supplied as a spare part for Vetus marine waste water systems. |
$ 191.44
-
+
|
|
1-2 weeks delivery time The Vetus WC002 pneumatic push-button component is a replacement air push button intended for Vetus Series 1 electric toilet installations and is specified as compatible with WCS1, WCL1, SMTO1, and HATO1. This control button is engineered for integration with Vetus marine sanitation systems to support normal toilet operation as a spare part within Vetus marine waste water system applications. |
$ 41.48
-
+
|
|
1-2 weeks delivery time The Vetus WC003 syphon breather component is a replacement unit for the discharge elbow used on Vetus WCS1, WCL1, and HATO1 series marine toilets. It is specified to prevent backflow in the marine toilet discharge line, supporting correct toilet system operation as part of Vetus marine waste water system spare parts. |
$ 24.79
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.