VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus RF158096 rubber flap assembly is a complete rubber flap component for marine ventilation systems using an MV 125 interface, specified for a 125 mm diameter connection and a 158 x 96 mm rectangular outlet. It is intended to maintain ventilation airflow while providing protection by preventing water ingress and limiting debris entry in marine environments. |
$ 54.56
-
+
|
|
1-2 weeks delivery time The Vetus RF158120 rubber flap complete assembly is a replacement flap unit for Vetus TC 150 transom fittings, specified for 158/120 mm diameter. Manufactured from rubber, it is intended to provide protection against water ingress and backflow in the transom fitting installation and is listed under spare parts for Vetus marine exhaust systems; references include 3-6946 and 4-694. |
$ 57.34
-
+
|
|
1-2 weeks delivery time The Vetus RF180120 rubber flap assembly is a complete rubber sealing component for Vetus MV 150 applications, specified with 180/120 mm dimensions and intended for Dr.3-6969 and Dr.4-694 configurations. Listed as a spare part for Vetus marine exhaust systems, it is supplied as a complete set for installation where a rubber flap is required for sealing and protection. |
$ 60.30
-
+
|
|
1-2 weeks delivery time The Vetus SET0001 rotating inlet hose port set is a replacement hose connection assembly for Vetus NLP50S, LSG, and LGS models, supplied with clamping rings (clamp ring assembly) and a seal to support a secure, leak-free joint. This set is specified with a 50 mm diameter and is listed as a spare part for Vetus marine exhaust systems for marine and industrial environments. |
$ 44.51
-
+
|
|
1-2 weeks delivery time The Vetus SET0002 rotating hose port connection set is a 60 mm hose connection replacement kit for Vetus exhaust system applications on NLP60, LSG60, LGS60, NLP360, and NLPH60 models. Supplied as a set, it includes a clamp ring assembly and seal, and is specified with clamping rings for the 60 mm connection diameter. |
$ 44.51
-
+
|
|
1-2 weeks delivery time The Vetus SET0003 hose connection set is a 75 mm diameter marine hose connection kit supplied with clamping rings, intended to provide reliable hose connections in marine installations. It is specified for NLP75+G+H+3 and for LSG75 and LGS75 configurations, and is listed under spare parts for Vetus marine exhaust systems. |
$ 48.82
-
+
|
|
1-2 weeks delivery time The Vetus SET0004 rotating inlet set is a replacement hose connection assembly for Vetus waterlocks, supplied with clamping rings (clamp ring assembly) and a seal for the rotating hose port interface. It is designed for a D 90 mm hose connection and is specified as compatible with NLP90, LSG90, LGS90, NLP390, and NLPH90 models within Vetus marine exhaust system spare parts. |
$ 48.82
-
+
|
|
1-2 weeks delivery time The Vetus SET0050A mounting bracket set is a dedicated installation hardware set for the first series of Vetus MGS...A waterlocks. Intended to provide a secure and customized mounting solution, this precision-engineered bracket kit supports stable integration of MGS...A waterlocks within Vetus marine exhaust system installations. |
$ 124.44
-
+
|
|
1-2 weeks delivery time The Vetus SET0051 mounting bracket set is intended for securing MGL instruments to a vessel dashboard, providing a stable installation interface. This set is specified as a durable, easy-to-install mounting solution to support reliable integration of MGL instrumentation in marine environments and is supplied as a Vetus spare part. |
$ 162.73
-
+
|
|
1-2 weeks delivery time The Vetus SET0051A mounting bracket set is a hardware kit intended for installing MGL.A instruments into a vessel dashboard, providing a secure and stable mounting interface. Supplied as spare parts within the Vetus marine exhaust systems category, the set is described as precisely engineered to simplify the mounting process for MGL.A instrumentation. |
$ 134.01
-
+
|
|
1-2 weeks delivery time The Vetus SET0052 clamping ring and sealing set comprises clamping rings and 2 x O-rings intended for NLP40, NLP45, and NLP50 thrusters. The components are specified to support secure installation and proper sealing within the thruster system to help maintain efficient operation. |
$ 47.86
-
+
|
|
1-2 weeks delivery time The Vetus SET0053 clamping ring kit is a hose clamp set supplying complete large clamping rings for Vetus NLP-series waterlocks, specified for NLP50S, NLP60, NLP65, NLP75, and NLP90. It is intended to support secure installation and continued integrity of the waterlock assembly in marine or industrial applications and is supplied as a spare part for Vetus marine exhaust systems. |
$ 51.69
-
+
|
|
1-2 weeks delivery time The Vetus SET0054 mounting hardware set is a dedicated installation kit for Vetus NLP40, NLP45 and NLP50 waterlocks. It provides the necessary components for secure mounting and is specified for use in marine and industrial applications, supporting correct installation of the waterlock within the exhaust system. |
$ 30.63
-
+
|
|
1-2 weeks delivery time The Vetus SETBKB140 mounting hardware set is a 140 mm mounting bracket kit supplied as spare parts for Vetus marine exhaust system installations, intended for the LT75 gooseneck and the FTR1320 raw water strainer. The set includes stainless steel brackets and machine screws to provide a secure fit and corrosion-resistant service in marine environments. |
$ 49.78
-
+
|
|
1-2 weeks delivery time The Vetus SETBKB170 mounting bracket set is a 170 mm set of mounting parts for Vetus marine exhaust system installations, intended to accommodate LT90 and LT110 goosenecks, LP090 and LP100 waterlocks, and the FTR525 water filter. It is specified as a spare part set for securing and integrating these components within the exhaust system arrangement. |
$ 53.60
-
+
|
|
1-2 weeks delivery time The Vetus SETBKB205 mounting hardware set is a 205 mm fastening kit supplied as replacement stainless steel brackets with machine screws for securing Vetus exhaust mufflers. It is specified for use with LP125, LP150, MF, MV090, and MV100 exhaust muffler configurations and is listed under spare parts for Vetus marine exhaust systems. |
$ 57.44
-
+
|
|
1-2 weeks delivery time The Vetus SETBKB315 fastening and mounting parts set is intended for secure installation of MF125/150 and MV125/150 exhaust mufflers in Vetus marine exhaust systems. Supplied as a 315 mm set of mounting parts, it is specified to provide stable fastening to support proper exhaust system installation and functionality. |
$ 59.34
-
+
|
|
1-2 weeks delivery time The Vetus SETHPW09 O-ring set is a two-piece sealing kit for the hose connection on an HPW waterlock, specified as spare parts for Vetus marine exhaust systems. Supplied as 2 O-rings, it is intended to provide a tight seal at the hose connection interface to help prevent leakage in the waterlock installation. |
$ 44.99
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.