VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus SETMGL O-ring set is a two-piece sealing component kit engineered for Vetus MGL waterlocks in marine exhaust systems. Supplied as a set of 2 O-rings, it is intended to provide a tight, secure seal to help prevent water leaks and supports straightforward installation as part of routine waterlock maintenance. |
$ 41.16
-
+
|
|
1-2 weeks delivery time The Vetus SETMGS O-ring set is a two-piece sealing component kit intended for Vetus MGS waterlock systems in marine exhaust installations. Supplied as a set of two O-rings, it is used to maintain a secure, leak-free seal during servicing and maintenance of MGS waterlocks and is listed under spare parts for Vetus marine exhaust systems. |
$ 40.21
-
+
|
|
1-2 weeks delivery time The Vetus SETMPG main seal set is a two-piece O-ring kit intended for the MGP waterlock system. These O-rings function as sealing elements to prevent water leakage in the waterlock assembly, supporting efficient operation of the marine exhaust waterlock system and contributing to vessel safety. |
$ 24.69
-
+
|
|
1-2 weeks delivery time The Vetus SETNLPG05 O-ring set is a four-piece NLPG seal kit specified for NLPG40, NLPG45, and NLPG50 models within Vetus marine exhaust systems. These NLPG O-rings are intended to provide a reliable, leak-proof seal to help maintain NLPG system integrity and are suitable for replacement or spare-part use on the listed models. |
$ 16.27
-
+
|
|
1-2 weeks delivery time The Vetus TCB137 fastening band is a 137 x 30 mm marine band specified for use as a spare part within Vetus marine exhaust systems. It is intended for securing hoses, cables, or installed components where a durable mechanical fastening solution is required in marine environments. |
$ 17.23
-
+
|
|
1-2 weeks delivery time The Vetus TCB151 band assembly is a 151x30 mm mechanical support component specified for the TC100 model in Vetus marine exhaust systems. It is intended to provide a secure fit and long-lasting support in mechanical applications and is supplied as a spare part for Vetus marine exhaust installations. |
$ 17.23
-
+
|
|
1-2 weeks delivery time The Vetus TCB174 band component is a 174x45 mm band specified for the TC125 model and supplied as a spare part within Vetus marine exhaust system applications. It is identified in the provided data as a durable band intended for engine or mechanical system use where the TC125 fitment is required. |
$ 17.23
-
+
|
|
1-2 weeks delivery time The Vetus TCB199 band component is specified as a 199x45mm band intended for the TC150 model within Vetus marine exhaust system spare parts. It is described as providing strength and reliability for marine and engine-related applications. |
$ 17.23
-
+
|
|
1-2 weeks delivery time The Vetus TRC100SVF exhaust flap spare component is intended for use with the Vetus TRC100SV exhaust system. Supplied as a stainless steel spare part for marine exhaust system maintenance and repair, it is specified to support correct exhaust system functionality and performance. |
$ 14.36
-
+
|
|
1-2 weeks delivery time The Vetus TRC125SVF exhaust flap assembly is a spare part for Vetus TRC125SV series marine exhaust systems, intended to reduce the risk of water ingress and exhaust backflow. It is specified as a protective component for the exhaust line to help protect the engine and exhaust components, and is described as having durable construction with easy installation for maintenance. |
$ 15.32
-
+
|
|
1-2 weeks delivery time The Vetus TRC150SVF exhaust flap assembly is an AISI 316 stainless steel transom connector component for TRC150SV exhaust applications, incorporating an integral check valve. It is specified for direct fitting to exhaust hoses with I.D. Ø152 mm and uses a Ø153 mm installation hole size, with Ø194 mm outer diameter and 150 mm depth. |
$ 16.27
-
+
|
|
1-2 weeks delivery time The Vetus TRC4045F rubber non-return flap is a backflow prevention component for marine plumbing systems, intended to stop reverse flow and reduce the risk of flooding and contamination. It is manufactured from rubber and is described for use across various marine fluid-handling applications, including bilge pumping and wastewater disposal. |
$ 9.58
-
+
|
|
1-2 weeks delivery time The Vetus TRC40SVF exhaust flap component is a spare part tailored for the TRC40SV model in Vetus marine exhaust systems. It is intended for exhaust system maintenance and repair to support reliable exhaust functionality in marine applications, and is described as being crafted from high-quality materials. |
$ 9.58
-
+
|
|
1-2 weeks delivery time The Vetus TRC45SVF exhaust flap component is specified for the TRC45SV model as a spare part for Vetus marine exhaust systems. It is intended for exhaust system maintenance and repair to support exhaust functionality and service life, and is described as being crafted from high-quality materials. |
$ 9.58
-
+
|
|
1-2 weeks delivery time The Vetus TRC5060F rubber non-return flap component is intended for exhaust mirror throughput types TRCPV and TRCSV in Vetus marine exhaust systems. It is specified as a rubber flap used with these through-transom fittings, supporting efficient exhaust system operation and facilitating installation on the transom, with exhaust hose connection made directly to the associated bushings. |
$ 10.53
-
+
|
|
1-2 weeks delivery time The Vetus TRC50SVF exhaust flap assembly is specified for the TRC50SV model and is used as a non-return flap within Vetus exhaust mirror transom throughput types TRCPV and TRCSV. The component supports transom installation and is intended to allow direct connection of the exhaust hose via the associated bushings; TRCPV uses a plastic housing, while TRCSV is manufactured in stainless steel (AISI 316), both incorporating a non-return flap function. |
$ 10.53
-
+
|
|
1-2 weeks delivery time The Vetus TRC60SVF exhaust flap component is intended for the TRC50SV exhaust system and is specified with a 60 mm diameter. It supports correct exhaust ventilation and is used to help prevent backflow in Vetus marine exhaust installations. |
$ 10.53
-
+
|
|
1-2 weeks delivery time The Vetus TRC7590F rubber exhaust flap is a spare component manufactured from durable rubber for Vetus TRC75PV and TRC90PV exhaust system models. It is intended to support proper exhaust system functioning as part of maintenance and repair work in marine exhaust installations. |
$ 10.53
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.