VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus ZWB30ISET seal set is a 30 mm replacement lip seal cartridge intended for Vetus ZWB30 and ZWB30A flexible inner bearing installations in stern gear systems. Supplied as a dual lip seal cartridge, it includes a complete front lip seal housing, a gasket, and a 15 g tube of Silicon Grease to support straightforward seal replacement and ongoing bearing system operation. |
$ 174.21
-
+
|
|
Vetus ZWB35RESA - Spare Set 35mm DLS Double Lip Seal III for ZWB35 and ZWB35A Flexible Inner Bearing
1-2 weeks delivery time The Vetus ZWB35RESA double lip seal spare set is a replacement dual lip seal cartridge (DLS Double Lip Seal III) intended for Vetus ZWB35 and ZWB35A Flexible Inner Bearing installations. Supplied as a complete front lip seal housing, it includes an O-ring and a 15 g Silicon Grease tube to support installation and service of Vetus stern gear system components. |
$ 186.66
-
+
|
|
1-2 weeks delivery time The Vetus ZWB40RESA double lip seal spare set is a 40mm DLS Double Lip Seal III replacement intended for the ZWB40 flexible inner bearing. It uses a dual lip seal arrangement for increased protection against leaks, with the front seal chamber packed with silicon grease. The set is designed for Vetus 40mm stern tubes manufactured in bronze, GRP, or steel. |
$ 196.22
-
+
|
|
1-2 weeks delivery time The Vetus ZWB45RESA replacement double lip seal set is a spare sealing component engineered for the Vetus ZWB45 shaft seal and specified for 45 mm stern tubes in Bronze, GRP, or Steel. It incorporates a flexible inner bearing with a dual lip geometry for leak protection, and the front seal chamber is supplied packed with silicon grease; raw water supply is managed via a dedicated water scoop or a branch feed from the engine exhaust cooling circuit, ideally routed up to an AIRVENT anti-syphon device. |
$ 205.79
-
+
|
|
1-2 weeks delivery time The Vetus ZWB50RESA dual lip seal replacement set is a 50 mm seal cartridge intended as a replacement for the Vetus ZWB50 shaft seal, providing a double-lip arrangement for additional leak security. It is specified for 50 mm Bronze, GRP, or Steel stern tubes and is stated as compatible with the Vetus ZWB50 and the ZWB50A flexible inner bearing. The front seal chamber is supplied pre-packed with silicon grease, and the kit is supplied with a complete front lip seal housing, an O-ring, and a 15 g silicon grease tube for stern gear service. |
$ 215.37
-
+
|
|
1-2 weeks delivery time The Vetus ZWB60RES seal cartridge set is a replacement dual lip seal solution for the Vetus ZWB60 Flexible Inner Bearing (60 mm). Supplied as a complete front lip seal housing, it includes a gasket and a 15 g tube of silicon grease to support service replacement and maintain the integrity of the ZWB60 bearing system. |
$ 363.74
-
+
|
|
1-2 weeks delivery time The Vetus ZWBH02 sealing plug is a rubber closure component for the first version of the ZWBH Flexible Inner Bearing, used in Vetus stern gear systems. Manufactured from durable rubber, it seals the bearing housing to reduce water and debris ingress that can lead to damage, and is described as easy to install on the ZWBH first-version bearing assembly. |
$ 6.23
-
+
|
|
1-2 weeks delivery time The Vetus ASD004 wing nut component is a replacement fastening element intended for Vetus ASD type Anti-Syphon Valves. It is described as precision-crafted for fit and function, providing secure attachment, and is specified as easy to install and replace with a high-quality construction for durability and longevity. |
$ 5.65
-
+
|
|
1-2 weeks delivery time The Vetus AV002 O-ring sealing component is specified as D 23 mm x 2.5 mm and is supplied as a spare part for Vetus marine exhaust systems. It is intended to provide a durable sealing interface for maintenance and repair work where this O-ring size is required. |
$ 4.31
-
+
|
|
1-2 weeks delivery time The Vetus AV005 air vent cap assembly is a replacement component for Vetus AIRVENTV and H anti-siphon units used within vessel ventilation system installations. It is supplied with self-tapping screws to support straightforward installation and is listed under spare parts for Vetus marine exhaust systems. |
$ 4.78
-
+
|
|
1-2 weeks delivery time The Vetus DM30001 grey wall bracket set is a mounting hardware kit intended to provide secure support for NLP50S, NLP60, NLP75, and NLP90 series components. Supplied as a durable, high-quality bracket set, it includes the necessary hardware for installation and is listed under spare parts for Vetus marine exhaust systems for marine and industrial environments. |
$ 45.85
-
+
|
|
1-2 weeks delivery time The Vetus DM30002 wall-mount bracket set is a black bracket and hardware kit intended for secure mounting of NLPHD equipment. Supplied as a set with the necessary mounting hardware, it is specified for NLPHD versions 50S, 60HD, 65HD, 75HD, and 90HD within the Vetus marine exhaust systems spare parts range. |
$ 47.76
-
+
|
|
1-2 weeks delivery time The Vetus DM30003 rotating hose connection assembly is a spare hose connection for Vetus NLPHD Heavy Duty Line waterlocks, intended to add installation flexibility for different hose sizes and configurations. It is referenced for Ø40mm setups and can be used to adapt arrangements such as a Ø40mm engine inlet with a Ø45mm outlet aft; for NLP40HD, NLP45HD, and NLP50HD applications it supports Ø40mm, Ø45mm, and Ø50mm hose sizes, with the note that reducing exhaust outlet diameter is not recommended due to potential backpressure increase. |
$ 45.76
-
+
|
|
1-2 weeks delivery time The Vetus DM30004 rotating hose connection is a spare connection component for Vetus NLPHD Heavy Duty Line waterlocks, intended to add installation flexibility within exhaust hose configurations. It is stated as compatible with NLP40HD, NLP45HD, and NLP50HD waterlocks and supports hose sizes Ø40 mm, Ø45 mm, and Ø50 mm; an example use case is achieving Ø40 mm inlet and Ø45 mm outlet when combined with a Ø40 hose waterlock and this Ø45 mm connector. |
$ 45.76
-
+
|
|
1-2 weeks delivery time The Vetus DM30005 rotating hose connection assembly is a spare hose connection intended for Vetus NLPHD Heavy Duty Line waterlocks, including NLP40HD, NLP45HD, and NLP50HD. It supports multiple hose diameters (Ø40 mm, Ø45 mm, and Ø50 mm) and can be used to add configuration flexibility—for example enabling Ø40 mm inlet to Ø45 mm outlet arrangements when combined with the appropriate waterlock and hose connector. The input notes that reducing the exhaust outlet diameter is not recommended due to potential increased backpressure that may damage the engine. |
$ 45.76
-
+
|
|
1-2 weeks delivery time The Vetus DM30006 rotating hose connection assembly is a spare part intended for Vetus NLPHD Heavy Duty Line waterlocks, specifically the NLP50SHD model, with a 50 mm hose connection size. The rotating design supports flexible exhaust hose routing and facilitates adaptation to different hose diameters and configurations for exhaust gas management in marine and industrial environments; consult the engine manufacturer before reducing exhaust outlet diameter to avoid increased backpressure. |
$ 59.16
-
+
|
|
1-2 weeks delivery time The Vetus DM30007 rotating hose connection assembly is a spare hose connection designed for Vetus NLPHD Heavy Duty Line waterlocks, providing added installation flexibility within the exhaust system. It is intended for Ø60 mm hose arrangements and supports multi-size configurations when used with other matching connectors, with hose sizes referenced as Ø50, Ø60, Ø75, and Ø90 mm, and is listed as compatible with NLP50SAHD, NLP60HD, NLP75HD, and NLP90HD waterlocks. |
$ 59.16
-
+
|
|
1-2 weeks delivery time The Vetus DM300075 rotating hose connection assembly is a 65mm diameter interface component intended for flexible hose connections in marine systems, including Vetus marine exhaust system applications. It is specified as a rotating hose connection for NLPHD and NLP65HD, supporting easy installation and reliable performance under dynamic operating conditions. |
$ 61.26
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.