VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus SET0205 locking ring set is a five-piece retention component set intended for nut shaft assemblies with a 50 mm diameter. These locking rings are used to secure fastening and component retention to support stability in marine equipment, and are supplied as spare parts for Vetus stern gear systems. |
$ 54.56
-
+
|
|
1-2 weeks delivery time The Vetus SET105 fastening bolt set is supplied as a set of 10 bolts for Velvet 5 inch propellers. Manufactured by Vetus as a spare part for Vetus stern gear systems, these set bolts are specified as high-quality marine-grade steel to provide secure fastening in the propulsion hardware assembly. |
$ 28.71
-
+
|
|
1-2 weeks delivery time The Vetus SS35M10 set screw component is a stainless steel fastener sized M10 x 35 mm for use in Vetus stern gear systems. It is specified as a durable set screw intended to provide reliability in marine environments and is supplied under the Spare Parts for Vetus Stern Gear Systems category. |
$ 1.92
-
+
|
|
1-2 weeks delivery time The Vetus TP1810 T-piece fitting is a pipe connection component for marine installations that converts an 18 mm line to 10 mm, providing a secure junction between different pipe sizes. Identified as part of the ZWBKIT and listed under spare parts for Vetus stern gear systems, it is manufactured from robust materials for long-lasting service in marine environments. |
$ 14.74
-
+
|
|
1-2 weeks delivery time The Vetus UNIKL1220 shaft clamping flange assembly for UNIFL12 is intended to secure a 20 mm diameter shaft in marine applications. Supplied as a spare part for Vetus stern gear systems, it is specified as a robust, marine-grade steel component designed to provide secure clamping and support straightforward installation and maintenance in propulsion system arrangements. |
$ 86.15
-
+
|
|
1-2 weeks delivery time The Vetus UNIKL1640 Unifl16 clamp bushing is a precision-engineered fastening component with a 40 mm diameter (D 40), intended to provide secure clamping and stable retention. Specified as compatible with standard fittings, it is supplied as a spare part for Vetus stern gear systems and is stated as suitable for marine and industrial applications. |
$ 268.01
-
+
|
|
1-2 weeks delivery time The Vetus VDR02 flexible mounting hardware set is intended for secure installation of VD2 series engines and includes 2 bolts with nuts, washers, and rubber washers. It is specified for stable mounting and vibration damping in marine and industrial applications and is listed as a spare part for Vetus stern gear systems. |
$ 239.30
-
+
|
|
1-2 weeks delivery time The Vetus VDR04 flexible mounting hardware set is specified for installing VD4 series engines and is supplied with 4 bolts, nuts, washers, and rubber washers to support secure fastening and vibration damping. The kit is intended to simplify mounting and is stated as suitable for both marine and industrial applications. |
$ 459.45
-
+
|
|
1-2 weeks delivery time The Vetus VDR06 flexible mounting set is a fastening and isolation kit for VD6 marine engine installations, supplied as a complete set of 6 bolts with nuts, washers, and rubber washers. Intended to provide secure engine support and assist with proper alignment, this mount set also reduces engine vibration to improve operational comfort and reliability. |
$ 545.60
-
+
|
|
1-2 weeks delivery time The Vetus VHDR10 constant velocity joint assembly is a Type 10 driveline component for Vetus stern gear propulsion systems, intended to provide smooth and efficient power transfer between shafts to support seamless propulsion system operation. The input specifies durable construction and an installation approach described as easy for maintenance. |
$ 2,105.82
-
+
|
|
1-2 weeks delivery time The Vetus VHDR15 constant-velocity joint assembly is a type 15 driveline component for Vetus stern gear propulsion systems, intended to provide smooth power transfer between shafts. Identified as a Type 15 CV joint, it is supplied as a spare part for stern gear installations and is described as having durable construction and straightforward installation for maintenance or replacement. |
$ 2,201.55
-
+
|
|
1-2 weeks delivery time The Vetus VHDR21 constant velocity joint assembly is a Type 21 CV joint intended for marine propulsion driveline use, supporting smooth power transfer between shafts in stern gear propulsion systems. Supplied as a spare part for Vetus stern gear systems, it is described as having durable construction and being intended for straightforward installation during maintenance or replacement. |
$ 3,819.19
-
+
|
|
1-2 weeks delivery time The Vetus VHDR30 constant-velocity joint is a Type 30 CV joint intended for marine propulsion driveline use, supporting smooth power transfer between shafts. Supplied as a spare part for Vetus stern gear systems, it is specified to enhance propulsion system performance and reliability, with durable construction and provisions for straightforward installation and replacement. |
$ 10,194.10
-
+
|
|
1-2 weeks delivery time The Vetus VHDR42 constant-velocity joint assembly is a Type 42 CV joint intended for marine propulsion driveline use, providing power transfer between shafts in Vetus stern gear systems. It is supplied as a spare part and is described as supporting smooth and reliable torque transmission to help maintain propulsion system efficiency and durability. |
$ 10,337.68
-
+
|
|
1-2 weeks delivery time The Vetus VSDR21025 thrust bearing assembly is a Type 2 bearing specified for the Vetus CV10 series using a 25 mm rod. It is intended to support rotational movements in stern gear propulsion arrangements, helping to reduce friction and wear to maintain smooth operation. |
$ 1,740.18
-
+
|
|
1-2 weeks delivery time The Vetus VSDR21030 thrust bearing assembly (Type 2) is specified for the CV10 series with a 30mm rod. It supports axial loads to facilitate smooth operation and is intended to minimize wear on rotating parts as a spare part for Vetus stern gear systems. |
$ 1,740.18
-
+
|
|
1-2 weeks delivery time The Vetus VSDR21525 thrust bearing assembly is a Type 2 bearing intended for the CV15 series with a 25 mm rod. It is specified to minimize friction and enhance the service life of marine propulsion components under heavy-duty operating conditions, and is supplied within the Spare Parts for Vetus Stern Gear Systems range. |
$ 1,835.89
-
+
|
|
1-2 weeks delivery time The Vetus VSDR21530 thrust bearing unit (Type 2) is specified for the CV15 series with a 30 mm rod. It is intended to support smooth rotational movement while reducing wear in Vetus stern gear system installations. |
$ 1,835.89
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.