VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus GLZ2524 rubber gaiter cuff is a replacement sealing component for the Vetus ZWBILAG25 self-aligning stuffing box, intended for installations with a 25 mm inner shaft bearing. Manufactured from rubber, it provides a secure, watertight seal to reduce water ingress and help protect the propulsion shaft bearing area from corrosion; the described compatibility includes inner shaft bearing diameters of 40 mm and 43 mm. |
$ 46.90
-
+
|
|
1-2 weeks delivery time The Vetus GLZ3023 gland packing set is a PTFE-impregnated sealing strip kit for a 30 mm stuffing box, supplied as four pre-cut strips with tapered ends for installation in the Vetus ZWBILG30 stuffing box (self-aligning inner bearing). Intended as a spare part for Vetus stern gear systems, it supports effective sealing to maintain propulsion system integrity in marine service. |
$ 15.79
-
+
|
|
1-2 weeks delivery time The Vetus GLZ3026 rubber sealing component is specified for a self-aligning stuffing box with Ø30 mm diameter and is listed with a size of 1 1/2 in. It is used to support a secure seal to help prevent leaks in marine stern gear applications and is categorized as a spare part for Vetus stern gear systems. |
$ 27.28
-
+
|
|
1-2 weeks delivery time The Vetus GLZ3523 stuffing box gland packing set is a sealing kit for 35 mm stuffing boxes, supplied as four pre-cut PTFE impregnated strips with tapered ends to support accurate fitment and sealing performance. It is specified for use with the Vetus ZWBILG35 Stuffing Box self-aligning inner bearing and is listed under spare parts for Vetus stern gear systems. |
$ 19.62
-
+
|
|
1-2 weeks delivery time The Vetus GLZ4023 gland packing set is a stuffing box packing solution specified for a 40 mm shaft, supplied as a set of 4 rings. It is manufactured from glass yarns with PTFE and a lubricant to minimize friction and maintain exceptionally low heat development during operation in Vetus stern gear stuffing box applications. |
$ 21.54
-
+
|
|
1-2 weeks delivery time The Vetus GLZ4024 rubber gaiter (cuff) is a replacement elastomer component intended for the Vetus ZWBILAG40 self-aligning stuffing box on 40 mm shaft installations. Supplied as a spare part for Vetus stern gear systems, it is specified as a rubber piece designed to provide a precise fit for the 40 mm stuffing box application. |
$ 42.12
-
+
|
|
1-2 weeks delivery time The Vetus GLZ4523 gland packing set is a PTFE-impregnated stuffing box packing strip kit for a 45 mm shaft, intended as a replacement set for the Vetus ZWBILG45 stuffing box self-aligning inner bearing arrangement. The pack is supplied as 4 pre-cut strips with tapered ends to support correct fitment and simplified installation in Vetus stern gear stuffing box service applications. |
$ 30.16
-
+
|
|
1-2 weeks delivery time The Vetus GLZ5023 gland packing strip set is a PTFE-impregnated replacement packing kit for a 50 mm shaft, specified for the Vetus ZWBILG50 stuffing box with self-aligning inner bearing. The set is supplied as 4 pre-cut strips with tapered ends to support correct fitment during stuffing box maintenance in Vetus stern gear systems. |
$ 33.51
-
+
|
|
1-2 weeks delivery time The Vetus KO01 lower half coupling component (size 6) is a stern gear spare part manufactured without a flange to support a compact, space-saving installation in marine driveline assemblies. It is intended to provide a seamless mechanical connection for reliable power transmission and is described as compatible with various systems and setups. |
$ 31.59
-
+
|
|
1-2 weeks delivery time The Vetus KO02 upper half coupling assembly (type 6) is a stern gear system spare part used to provide a secure, precise connection between the engine and gearbox. It incorporates a flange interface to the gearbox to improve attachment stability and reduce the risk of misalignment in marine drivetrain installations. |
$ 45.85
-
+
|
|
1-2 weeks delivery time The Vetus KO08 clamping ring coupling component (type Clamping Ring Coupling 6) is a Vetus-manufactured marine accessory used to provide a secure connection between components in Vetus stern gear systems. Supplied as a spare part for stern gear applications, it is intended to ensure a durable mechanical link during maintenance or system upgrades. |
$ 19.62
-
+
|
|
1-2 weeks delivery time The Vetus KO09 locking nut component (SKF-Lock Nut KM10) is an M50x1.5 SKF-nut specified as a replacement for the Vetus Type 6 Coupling. Supplied as a spare part for Vetus stern gear systems, it is intended to provide a secure and precise nut fit within the coupling assembly. |
$ 32.45
-
+
|
|
1-2 weeks delivery time The Vetus KO103 lower half-shell coupling component is a lower aluminum half shell specified for Clutch Type 10 in Vetus stern gear systems. Manufactured from high-quality aluminum, it is supplied as an original spare part intended to support reliable clutch/flexible coupling operation in marine drivetrain installations. |
$ 34.47
-
+
|
|
1-2 weeks delivery time The Vetus KO104 upper aluminum half-shell component is an upper half for a Type 10 clutch/flexible coupling arrangement in Vetus stern gear systems. Manufactured from aluminum, it is intended as an original spare part to support reliable and efficient clutch operation in marine applications. |
$ 36.37
-
+
|
|
1-2 weeks delivery time The Vetus KO18 flexible rubber body set is a coupling and clutch-system service kit consisting of four rubber elements for Clutch Type 6 applications. Each rubber body is specified as OD 38 x 31 high x 15 mm and is supplied as a spare part for Vetus stern gear systems, intended to support smooth clutch operation in marine or industrial installations. |
$ 49.78
-
+
|
|
1-2 weeks delivery time The Vetus KO19 pin set is a coupling hardware kit for the Type-6 clutch, supplied as a set comprising roll pins 5x60 (2) and lock pins 8x60 (2). It is specified as a spare part for Vetus stern gear systems and is intended to support correct clutch/coupling functionality in marine applications. |
$ 12.92
-
+
|
|
1-2 weeks delivery time The Vetus KO20 pin set is a fastening component kit for Vetus Type-6 clutch (Kupplung Typ-6) installations, supplied as a set of rollpins and lockpins for Coupl. 6. Contents include rollpin 6x60 (2 pcs) and lockpin 10x60 (2 pcs) for use in Vetus stern gear system applications where these pins are specified. |
$ 14.84
-
+
|
|
1-2 weeks delivery time The Vetus KO30 rubber coupling element is a 40 x 40 mm cushioning component intended for coupling type 10 and 14 installations. It provides vibration isolation within marine propulsion systems and is supplied as a spare part for Vetus stern gear systems to help reduce wear between coupling components and support alignment stability. |
$ 40.21
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.