VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus WF27 gasket set is a sealing kit comprising an upper lid seal and a lower gasket for the Vetus Filter 525 stainless steel raw water filter. Supplied as spare parts for product FTR525, this set is intended to restore sealing integrity for reliable filtration in the vessel’s water system. |
$ 29.04
-
+
|
|
1-2 weeks delivery time The Vetus WF525 stainless basket component is designed specifically for the FTR525 water strainer and functions as the filtration element that helps prevent debris from entering the strainer body. Manufactured from stainless steel for durability, this spare part supports efficient water filtration within the FTR525 system to help maintain strainer performance. |
$ 172.30
-
+
|
|
1-2 weeks delivery time The Vetus CT50065 intermediate flange assembly is specified as an interface component for ZF63 applications on BULFL32 and is referenced as an intermediate flange for HSW630/BULFL32. It is intended to provide a precise and reliable connection when adapting, extending, or upgrading a marine propulsion system, and is listed under spare parts for Vetus stern gear systems. |
$ 737.04
-
+
|
|
1-2 weeks delivery time The Vetus CT50067 adaptor/intermediate flange assembly is specified as an intermediate flange for BULFL12 applications on PRM750 and also described as an adaptor flange from Bulflex32 to gearbox PRM402. It is intended to provide a precise, reliable mechanical interface within Vetus stern gear propulsion system installations. |
$ 363.74
-
+
|
|
1-2 weeks delivery time The Vetus DLS002 silicone grease tube is a 15 gram lubricant formulated for use with ZWB and ZWBH propeller shaft bearings and seals in Vetus stern gear systems. It provides lubrication and is specified to protect against wear and corrosion to support component condition within the propulsion system. |
$ 11.49
-
+
|
|
1-2 weeks delivery time The Vetus DLS25005 outer bearing flange assembly is a bronze mounting flange with an outer bearing, specified for a 25 mm diameter, intended for stern gear systems. It is supplied as a spare part for Vetus stern gear installations where secure mounting and durable performance in marine environments are required. |
$ 86.15
-
+
|
|
1-2 weeks delivery time The Vetus DLS25009 rubber gaiter hose assembly is a replacement connection hose for the Vetus ZWB25 self aligning dual lip seal shaft bearing, specified with a 25 mm hose diameter. Supplied as a spare part for Vetus stern gear systems, it is used to provide a tight seal interface for the ZWB25 bearing installation. |
$ 36.37
-
+
|
|
1-2 weeks delivery time The Vetus DLS30005 bronze mounting flange outer bearing unit is specified with a 30 mm diameter and is intended to provide structural support within stern gear systems. Manufactured in bronze for marine service, it is described as offering high resistance to corrosion and wear in demanding operating conditions. |
$ 90.93
-
+
|
|
1-2 weeks delivery time The Vetus DLS30006 sealing ring is an O-ring specified as 48x3 mm with a shore hardness of 70 gr (Shore A), intended for use with an outer bearing 30 mm. Manufactured from high-quality elastomer, it is used to maintain leak-tight seals in marine and industrial installations, including engines, hydraulic systems, and pumps, and is listed under spare parts for Vetus stern gear systems. |
$ 4.31
-
+
|
|
1-2 weeks delivery time The Vetus DLS30009 hose component is a connection hose intended for the Vetus ZWB30 bearing, specified for D 30 mm. It is used within Vetus stern gear systems to provide a sealed hose connection supporting the integrity of the ZWB30 installation. |
$ 40.21
-
+
|
|
1-2 weeks delivery time The Vetus DLS35005 outer bearing unit is a stern gear spare part specified with a 35 mm diameter and described as a bronze mounting-flange outer bearing for marine applications. It is intended for maintenance or replacement within Vetus stern gear systems where a 35 mm outer bearing is required. |
$ 110.08
-
+
|
|
1-2 weeks delivery time The Vetus DLS35009 rubber gaiter hose is a replacement sealing hose intended for the Vetus ZWB35 self aligning dual lip seal shaft bearing (35 mm). It is used as part of the stern gear sealing arrangement to provide a secure and efficient seal for the ZWB35 system and is supplied as a spare part for Vetus stern gear systems. |
$ 54.56
-
+
|
|
1-2 weeks delivery time The Vetus DLS40005 flange-and-bearing assembly is a mounting flange fitted with a bronze outer bearing with an outer diameter of 40 mm. Intended as a spare part for Vetus stern gear systems, it provides bearing support for rotating shafts to promote smooth operation and reduced friction in marine and industrial machinery where corrosion resistance and durable construction are required. |
$ 124.44
-
+
|
|
1-2 weeks delivery time The Vetus DLS40009 rubber gaiter hose is a replacement connection hose for the Vetus ZWB40 self aligning dual lip seal shaft bearing, specified for D 40mm. It is used to provide a secure sealing connection as part of Vetus stern gear system service and maintenance. |
$ 60.30
-
+
|
|
1-2 weeks delivery time The Vetus DLS45005 flange component is a bronze mounting flange intended for an outer bearing with a 45 mm diameter. It is used to provide a secure attachment in marine equipment and is supplied as a spare part for Vetus stern gear systems, suitable for installation or replacement where this bearing/flange interface is specified. |
$ 167.51
-
+
|
|
1-2 weeks delivery time The Vetus DLS45009 rubber gaiter hose assembly is a replacement connection hose for the Vetus ZWB45 self aligning dual lip seal shaft bearing, specified for a 45 mm bearing diameter. Used in Vetus stern gear systems, it provides the sealing connection associated with the ZWB45 bearing arrangement. |
$ 57.44
-
+
|
|
1-2 weeks delivery time The Vetus DLS50005 mounting flange assembly is a bronze external-use flange for a 50 mm outer bearing, intended to provide secure attachment within Vetus stern gear systems. Supplied as a spare part, it is used for installation or replacement where a 50 mm outside mounting flange is specified. |
$ 169.42
-
+
|
|
1-2 weeks delivery time The Vetus DLS50009 rubber gaiter hose is a replacement hose specified for the Vetus ZWB50 self-aligning dual lip seal shaft bearing. It is supplied with a 50 mm diameter to ensure correct fitment on the ZWB50 bearing arrangement, supporting protection and ongoing shaft bearing operation in marine stern gear service. |
$ 57.44
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.