VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus HT1023SD is a 75 cm³ variable load-sensing hydraulic piston pump with right-hand (clockwise) rotation, featuring a cast-iron low-noise body, SAE-C flange with a 14-tooth spline shaft, and side-mounted suction and pressure connections. Designed for installation on a main or auxiliary engine and compatible with Twindisc gearboxes, the unit supports speeds up to 2880 rpm. |
$ 7,229.55
-
+
|
|
1-2 weeks delivery time The Vetus HT1016SD3 is a 100 cm³ variable load-sensing hydraulic piston pump with left-hand (anti-clockwise) rotation, designed for installation on a main or auxiliary marine engine. It features a robust cast-iron, low-noise housing, an SAE-C 4-bolt flange with a 17-tooth spline shaft, and side suction/pressure connections. Maximum operating speed: 2450 rpm. |
$ 8,024.43
-
+
|
|
1-2 weeks delivery time The Vetus HT1016SD4 is a 130 cm³ variable load-sensing hydraulic piston pump for marine applications. It features a cast-iron low-noise housing, left-hand (anti-clockwise) rotation, SAE-C 4-bolt flange with a 17-tooth spline shaft, and side suction/pressure connections. Designed for mounting on a main or auxiliary engine, with a maximum operating speed of 2200 rpm. |
$ 9,295.85
-
+
|
|
1-2 weeks delivery time The Vetus HT1027 piston pump (article HT1027) is a 45 cc variable load-sensing hydraulic pump designed for mounting on John Deere engine PTO systems. It features a clockwise rotation (right-hand), an aluminum housing with SAE-B flange interface, a 13-tooth splined drive shaft, side-positioned suction and pressure ports, and supports speeds up to 2800 RPM. |
$ 4,606.65
-
+
|
|
1-2 weeks delivery time The Vetus HT1028B hydraulic tank system (article HT1028B) is a compact 20-liter aluminum hydraulic reservoir designed for bow thrusters on vessels without an existing hydraulic installation. The unit is configured for fixed-displacement pumps (HT1029) and 24V valves, supplied complete with required steering and control components. Suitable for VETUS bow thruster models BOW55HMD and BOW95HMD, it features durable construction and a space-efficient layout with dimensions of 470 × 415 × 310 mm. |
$ 4,250.81
-
+
|
|
1-2 weeks delivery time The Vetus HPTANK hydraulic tank (article HPTANK) is a 35 liter AISI 316 stainless steel reservoir designed for marine and industrial hydraulic systems. With compact overall dimensions of approximately 530 × 210 × 565 mm, it provides corrosion-resistant hydraulic oil storage and is supplied with an integrated filter and temperature sensor for reliable operation and system monitoring. The tank is suitable for use in 12 V and 24 V installations and can be connected to one or more compatible hydraulic pumps and circuits. |
$ 2,421.53
-
+
|
|
1-2 weeks delivery time The Vetus HT1010 hydraulic tank (article HT1010) is a 70-liter aluminium reservoir with a painted steel cover, designed as the base component of Vetus Power Hydraulic systems. It includes a return filter, temperature and content gauge, suction connection, a manifold for up to five hydraulic control devices, and a factory-mounted HT1013 bow/stern thruster solenoid valve. Suitable for 24 V systems, the tank typically provides sufficient oil cooling but may require an external cooler in cases of extended hydraulic appliance operation. Standard installed dimensions are approximately 530 × 565 × 210 mm. |
$ 4,090.07
-
+
|
|
1-2 weeks delivery time The Vetus HT1010BS hydraulic tank (article HT1010BS) is a 130-liter stainless steel AISI 316 reservoir designed for large marine hydraulic systems with dual engine or dual pump configurations. It is equipped with twin 2-inch ball valves, a return filter, a temperature and content gauge, and a low-level alarm. Suitable for 24 V control integration, it provides high oil volume for advanced custom-build hydraulic installations. Standard installed dimensions are approximately 470 × 415 × 310 mm, while the bare tank dimensions without control units are 700 × 410 × 460 mm. |
$ 8,421.55
-
+
|
|
1-2 weeks delivery time The Vetus HT1026 Manifold for Additional Control Units is an expansion base block designed for the V-Quipment accessory system. It includes an electrical connection box and is required when a vessel installation needs more than five steering and control units. Suitable for integration into compatible hydraulic steering configurations. |
$ 2,021.28
-
+
|
|
1-2 weeks delivery time The Vetus HT1011 Single Step Load Sensing Device is a single-stage steering and control unit designed for hydraulic systems requiring controllable working pressure, such as bow and stern thrusters. It provides zero or full flow depending on active load detection and includes an electrical connection box for complete system integration. Built for Power Hydraulics accessory configurations. |
$ 1,213.89
-
+
|
|
1-2 weeks delivery time The Vetus HT1012 Dual Step Load Sensing Device is a two-stage steering and control unit for hydraulic systems requiring both half-power and full-power pressure control, such as bow and stern thrusters. It delivers zero, partial, or full flow depending on real-time load conditions and is supplied with an electrical connection box for simplified integration into Power Hydraulics systems. |
$ 2,218.27
-
+
|
|
1-2 weeks delivery time The Vetus HT1013 Solenoid Control Unit is a 24V hydraulic control valve designed for bow and stern thrusters with a flow capacity of up to 60 litres per minute. Built for Power Hydraulics configurations, it supports efficient and responsive thrust control on a wide range of vessel types. A 12V version is available by special order. |
$ 510.32
-
+
|
|
1-2 weeks delivery time The Vetus HT1014 Directional Control Valve is a 24V solenoid-operated steering and control unit designed for mast-lowering devices, radar brackets, and other systems driven by hydraulic cylinders. It includes a counterbalance feature for safe motion control and is part of the Power Hydraulics accessory line. A 12V version is available upon special request. |
$ 2,342.10
-
+
|
|
1-2 weeks delivery time The Vetus HT1024 Solenoid Control Unit is designed for hydraulic stabilizer systems, serving as the power supply and steering/control interface when stabilizers are mounted on a base block and there is no available space on the tank base block. It operates on 24V and includes mounting links for simplified system integration within Power Hydraulics configurations. |
$ 1,971.87
-
+
|
|
1-2 weeks delivery time The Vetus HT102311 Single Step Solenoid Control Unit is designed for anchor windlasses, capstans, and other hydraulic motor-driven equipment with a flow rate up to 60 litres per minute. It supports separate adjustment of pressure and oil flow to achieve precise operational control. The standard version operates at 24V, while a 12V version is available on special order. Optimized for marine Power Hydraulics systems. |
$ 1,267.68
-
+
|
|
1-2 weeks delivery time The Vetus HT102312 Dual Step Solenoid Control Unit is designed for anchor windlasses, capstans, and other hydraulic motor-driven equipment with a flow requirement of up to 60 litres per minute. It operates in two power stages, with adjustable oil flow for optimized performance. The unit is supplied in a 24V version, while 12V is available upon special order as part of the Power Hydraulics accessory range. |
$ 827.40
-
+
|
|
1-2 weeks delivery time The Vetus HT5034 Electrical Connection Box is a marine-grade junction unit (part number HT5034) designed for 12 V or 24 V hydraulic system installations; it centralises wiring for solenoid valves, control panels and power supply, ensuring clean, reliable and compact electrical integration for thrusters, windlasses and other hydraulic accessories on board. |
$ 746.72
-
+
|
|
1-2 weeks delivery time The Vetus HT1032 Proportional Valve SD is a 24 V proportional hydraulic valve designed for devices such as bow thrusters and anchor winches with hydraulic capacity between 40 and 130 litres. The valve adapts to the capacity of the connected device and is available in both 24 V and 12 V versions, providing smooth proportional control for marine hydraulic applications. |
$ 3,260.18
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.