VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus HT1035 Double Proportional Valve SD PGV is a 24 V dual proportional hydraulic control solution for consuming devices such as bow thrusters, stern thrusters and anchor winches. It supports a combined hydraulic capacity between 40 and 130 litres and can control two proportional loads in a single system. A 12 V option is available by special order. |
$ 5,881.84
-
+
|
|
1-2 weeks delivery time The Vetus HT3057 is a dedicated connection kit (part number HT3057) for hydraulic bow (or stern) thrusters with thrust capacity 55 or 95 kgf; it provides all required hydraulic connections and fittings to ensure secure, reliable integration of the thruster, pump and hydraulic system, simplifying installation or retrofit on small to mid-size vessels. |
$ 156.25
-
+
|
|
1-2 weeks delivery time The Vetus HT3056 Connection Kit is a dedicated installation set for hydraulic bow (or stern) thrusters rated up to 160 kgf (160 kgf thrust capacity), designed to interconnect thruster, hydraulic pump and control components reliably. The kit ensures secure mounting and hydraulic integration, simplifying installation for vessels using or upgrading hydraulic propulsion systems. |
$ 162.99
-
+
|
|
1-2 weeks delivery time The Vetus HT3061 Connection Kit (part number HT3061) is a hydraulics installation set designed for hydraulic bow (or stern) thrusters rated at 230 kgf. The kit delivers all necessary hydraulic connection components to safely and reliably integrate a 230 kgf-class thruster with the vessel’s hydraulic system, simplifying installation or retrofit, ensuring correct pressure handling and compliance with marine standards. |
$ 262.66
-
+
|
|
1-2 weeks delivery time The Vetus HT3058 Connection Kit (part number HT3058) is engineered for hydraulic bow or stern thrusters with thrust capacity up to 310 kgf. The kit includes all essential hydraulic fittings and connectors to enable secure, marine-rated installation of the thruster with hydraulic power unit, ensuring proper pressure handling and reliable operation on medium to large vessels. |
$ 245.15
-
+
|
|
1-2 weeks delivery time The Vetus STAFIN04B is a stainless steel (AISI 316) fin stabilizer set (2-piece, total fin area 0.4 m²) designed for hydraulic stabilizer systems. It is intended for installation on yachts and motorboats to significantly reduce roll/pitch motions, offering “plug-and-play” installation for steel, GPR or aluminum hulls — ideal for retrofit or new builds needing reliable roll stabilization. |
$ 19,711.37
-
+
|
|
1-2 weeks delivery time The Vetus STAFIN05B is a set of two stainless-steel AISI 316 fin stabilizers with a total fin area of 0.5 m², designed for installation below the waterline on both sides of yachts over 10 m. Using a hydraulic system and fully automatic control, the fins continuously adjust their angle to significantly reduce roll and pitch motion in heavy swell or rough weather. Each fin measures 1024 mm in length and 554 mm in height and is suitable for steel, GRP or aluminum hulls. |
$ 21,048.26
-
+
|
|
1-2 weeks delivery time The Vetus STAFIN06B is a set of two stainless-steel AISI 316 fin stabilizers with a total fin area of 0.6 m², designed for installation beneath the waterline on yachts and motorboats. Each fin measures 1125 mm in length and 600 mm in height and operates via a 24 V hydraulic system with automatic computer control, significantly reducing roll and pitch on steel, GRP or aluminum vessels, including retrofit applications. |
$ 22,135.30
-
+
|
|
1-2 weeks delivery time The Vetus STAFIN07B is a marine stabilizer fin set consisting of two AISI 316 stainless-steel fins with a total area of 0.7 m². Designed for installation below the waterline on both sides of the hull, each fin operates through a 24 V hydraulic system with computer-controlled angle adjustment, significantly reducing roll and pitch on steel, GRP, or aluminum vessels. The fins measure 1318 mm in length, making them suitable for yachts requiring enhanced stability in rough sea conditions. |
$ 22,636.37
-
+
|
|
1-2 weeks delivery time The Vetus STA24VA is a complete electric stabilizer system set designed for marine hydraulic roll-stabilization. It includes two cast-steel fin actuator housings with cylinders, yokes, a roll sensor, hydraulic pressure block, control panel, connection box, couplings, grease pump and consumables, as well as full installation documentation. The system runs on a 24-volt supply and is suitable for integration into onboard hydraulic systems to significantly reduce roll on yachts and motor vessels. |
$ 23,052.61
-
+
|
|
1-2 weeks delivery time The Vetus HT1028S is a compact 20-liter hydraulic storage tank system designed for vessels without an existing hydraulic network, supplying stabilizers with the required hydraulic power, steering and control integration. It is configured for pumps with a fixed stroke volume (HT1029) and 24 V valves, with optional versions available for load-sensing pumps and 12 V valves. |
$ 4,426.93
-
+
|
|
1-2 weeks delivery time The Vetus STATHS is a set of two through-hull fittings specifically designed for mounting stabilizer fins on steel-hulled vessels. Intended for use in hydraulic stabilizer installations, the set forms the sealed structural interface between the fin actuators and the vessel’s hull, ensuring secure and stable assembly of the stabilizer system. |
$ 4,259.90
-
+
|
|
1-2 weeks delivery time The Vetus STATHA is a set of two through-hull fittings engineered for the installation of stabilizer fins on aluminum-hulled vessels. Designed for hydraulic stabilizer systems, these components provide a strong, watertight structural interface that supports proper alignment and secure mounting of fin actuators on both sides of the hull. |
$ 4,092.86
-
+
|
|
1-2 weeks delivery time The Vetus STATHG is a set of two through-hull fittings designed for installing hydraulic stabilizer fins on GRP (fiberglass) hulls. Serving as the structural and watertight interface between fin actuators and the vessel, this set ensures correct alignment, secure mounting and reliable function of stabilizer systems on both sides of the hull. |
$ 3,424.08
-
+
|
|
1-2 weeks delivery time The Vetus HT1018 is a hydraulic power-steering pump delivering 95 cm³ per revolution, intended for use with steering cylinders up to model MT230. It reduces helm effort to approximately 10 % of non-powered steering, offering precise and smooth hydraulic steering control — ideal for larger motor yachts and vessels needing reliable, low-effort helm operation. |
$ 2,488.59
-
+
|
|
1-2 weeks delivery time The Vetus HT1019 is a 24-volt solenoid control unit designed for hydraulic power-steering systems and inboard autopilot integration. It provides automatic hydraulic flow switching, enabling smooth transition between manual helm input and autopilot steering control. A 12-volt version is available on request, making the unit adaptable to different onboard power configurations. |
$ 3,415.33
-
+
|
|
1-2 weeks delivery time The Vetus HT1020 is a hydraulic power-steering pump with a displacement of 75 cm³ per revolution, engineered for steering cylinders up to model MTC175. Designed for larger vessels, it reduces helm effort to around 10% of manual steering, offering smooth and reliable hydraulic helm control for enhanced comfort and safety. |
$ 2,608.47
-
+
|
|
1-2 weeks delivery time The Vetus HT1021 is a dual non-return valve designed for hydraulic power-steering installations, ensuring controlled one-way hydraulic flow and preventing system backfeed. It enhances steering reliability and safety by maintaining stable hydraulic pressure in steering circuits during vessel maneuvering. |
$ 341.46
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.