VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus BPTD12 time delay unit (article: BPTD12) is designed for use with 12-volt bow thruster control panels BPSM and BPJSTA. It prevents damage by delaying direction reversal commands, eliminating the risk of switching the thruster too quickly from port to starboard or vice versa. Especially recommended for charter and rental vessels to ensure safe thruster operation and protect the motor. |
$ 260.64
-
+
|
|
1-2 weeks delivery time The Vetus BPTD24 time delay unit (article: BPTD24) is designed for 24V bow thruster control panels BPSM and BPJSTA, preventing rapid direction switching that may damage the motor. It automatically delays reverse activation to ensure safe operation and is highly recommended for hire craft, training vessels, or any boat with multiple operators. |
$ 260.64
-
+
|
|
1-2 weeks delivery time The Vetus BP29 connection cable (article: BP29) is a 6-meter pre-terminated control cable featuring multi-plug connectors, designed for easy plug-and-play installation between Vetus bow or stern thruster panels and Vetus electric or single-stage hydraulic thrusters. It ensures secure communication and reliable control system performance without custom wiring. |
$ 101.70
-
+
|
|
1-2 weeks delivery time The Vetus BP2910 cable (article: BP2910) is a 10-meter pre-terminated control connection cable equipped with multi-plug connectors, designed for plug-and-play installation between Vetus thruster control panels and Vetus electric or single-stage hydraulic thrusters. It ensures secure and reliable control signal transmission over extended distances, making it suitable for larger vessels or installation layouts requiring additional routing length. |
$ 132.68
-
+
|
|
1-2 weeks delivery time The Vetus BP2916 control cable (article: BP2916) is a 16-meter pre-terminated connection cable designed for connecting Vetus bow or stern thruster control panels to compatible electric or single-stage hydraulic thrusters. Equipped with molded multi-plug connectors, it provides reliable signal transfer and allows long-distance routing across larger vessels without custom wiring work. |
$ 167.03
-
+
|
|
1-2 weeks delivery time The Vetus BP2918 cable (article: BP2918) is an 18-meter plug-and-play control connection cable for linking Vetus bow or stern thruster panels to electric or single-stage hydraulic thrusters. It features pre-installed multi-plug connectors on both ends to ensure secure signal transmission and long-distance installation flexibility on larger vessels. |
$ 196.67
-
+
|
|
1-2 weeks delivery time The Vetus BP2920 connection cable (article: BP2920) is a 20-meter pre-terminated control cable designed for reliable connection between Vetus thruster control panels and Vetus electric or single-stage hydraulic thrusters. Featuring molded multi-plug connectors at both ends, it allows secure long-distance routing on larger vessels without additional wiring work. |
$ 202.05
-
+
|
|
1-2 weeks delivery time The Vetus BPMAIN12 (article: BPMAIN12) is a 12-volt remotely operated battery main switch designed for high-current equipment such as bow thrusters, anchor windlasses and other powerful DC consumers. It can be operated electrically from the supplied control panel or manually via the built-in red emergency stop knob. Rated for 250 A continuous and up to 800 A for 3 minutes, it must be installed in the negative (-) cable as close to the battery as possible for maximum safety. |
$ 1,196.82
-
+
|
|
1-2 weeks delivery time The Vetus BPMAIN24 (article: BPMAIN24) is a remotely operated 24-volt battery main switch designed for high-current consumers such as bow thrusters, stern thrusters, and windlasses. It provides remote ON/OFF switching from a supplied control panel and manual emergency shutdown via a red stop button. With a 250 A continuous rating and 800 A for 3 minutes, it must be installed in the negative cable close to the battery bank for optimal safety and performance. |
$ 1,196.82
-
+
|
|
1-2 weeks delivery time The Vetus BPMEC extension cable (article: BPMEC) is a 6-meter cable designed for use with BPMAIN remote battery main switch systems. It allows the control panel to be positioned further from the battery switch location, supporting flexible installation layouts on vessels with multiple stations or greater distances between helm and power compartments. |
$ 112.47
-
+
|
|
1-2 weeks delivery time The Vetus BPMRC remote control panel (article: BPMRC) is designed for use with BPMAIN remote battery main switch systems, allowing convenient ON/OFF control of high-current 12V or 24V consumers such as thrusters and windlasses from an additional helm location. It enables safe battery isolation from multiple stations onboard. |
$ 581.91
-
+
|
|
1-2 weeks delivery time The Vetus ZE040 strip fuse (article: ZE040) is a 40 A C20 slow-blow protective fuse designed for thrusters, windlasses and other high-current onboard equipment. Encapsulated in glass, it prevents splatter and fire risk in the event of overload. Fully compatible with the Vetus ZEHC100 fuse holder for safe and reliable marine electrical installations. |
$ 20.88
-
+
|
|
1-2 weeks delivery time The Vetus ZE050 strip fuse (article: ZE050) is a 50 A C20 slow-blow type designed to protect marine equipment with high start-up loads, including thrusters and windlasses. The fuse is encapsulated in glass to prevent splatter and reduce fire risk in case of overload. It is compatible with the Vetus ZEHC100 fuse holder for safe integration into onboard DC circuits. |
$ 20.88
-
+
|
|
1-2 weeks delivery time The Vetus ZE063 strip fuse (article: ZE063) is a 63 A C20 slow-blow fuse designed for marine applications with high start-up current loads such as bow thrusters and anchor windlasses. The fuse element is fully encapsulated in glass to prevent splatter and reduce fire risk in the case of overload, ensuring safe and reliable operation in onboard DC power circuits. |
$ 20.88
-
+
|
|
1-2 weeks delivery time The Vetus ZE080 strip fuse (article: ZE080) is an 80 A C20 slow-blow fuse suitable for bow thrusters, windlasses, and other high-current 12/24V marine circuits. The fuse is encapsulated in glass to prevent splatter and minimize fire hazards in the event of overload. Compatible with the Vetus ZEHC100 fuse holder for safe and secure installation. |
$ 20.88
-
+
|
|
1-2 weeks delivery time The Vetus ZE100 strip fuse (article: ZE100) is a 100 A C20 slow-blow marine fuse designed for high-current applications such as bow thrusters and anchor windlasses. The fuse is fully encapsulated in glass to prevent splatter and reduce fire risk in overload conditions. It is compatible with the Vetus ZEHC100 fuse holder for safe and reliable electrical protection onboard. |
$ 20.88
-
+
|
|
1-2 weeks delivery time The Vetus ZE125 Strip Fuse C20 (125A) is a “slow blow” marine-grade fuse designed for demanding onboard systems such as thrusters and windlasses. Its robust 125 Amp rating and glass encapsulation prevent splatter and reduce fire risk, making it suitable for high-load protection applications. |
$ 20.88
-
+
|
|
1-2 weeks delivery time The Vetus ZE160 Strip Fuse C20 (160A) is a “slow blow” marine-grade fuse engineered for high-current onboard equipment such as thrusters and windlasses. Its 160 Amp rating supports heavy startup loads, while the glass encapsulation prevents splatter and fire under fault conditions. |
$ 20.88
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.