Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 033D4203 cylinder head gasket set is a complete sealing set for the cylinder head joint on BUKH DV36 and DV48 marine diesel engines. Designed for service and overhaul work, it helps restore a tight seal between the cylinder head and engine block to maintain proper compression and keep coolant and oil passages securely separated. |
$ 713.97
-
+
|
|
1-2 weeks delivery time The Bukh 033D5009 gearbox conversion set upgrades the transmission installation on BUKH DV36 marine diesel engines as an alternative solution where a BW7 3:1 setup is defective. Supplied as a complete kit with a PRM150/3R gearbox including coupling, plus an adapter plate, oil cooler, and oil hoses, it streamlines repowering of the driveline for pleasure craft applications. |
$ 9,224.53
-
+
|
|
1-2 weeks delivery time The Bukh 033D5014 PRM125A reduction gear kit with a 2.5:1 ratio is built to match Bukh 2-cylinder and 3-cylinder marine engine installations. Supplied as a complete kit, it supports correct propulsion gearing by reducing engine speed to the drivetrain for smooth, controlled power delivery. |
$ 6,839.98
-
+
|
|
1-2 weeks delivery time The Bukh 033D7312 flywheel is a precision engine rotating-mass component for BUKH DV36 and DV48 marine diesel engines. Designed to smooth crankshaft speed fluctuations and provide stable inertia for starting and low-speed operation, it supports reliable power delivery and correct drivetrain engagement in the flywheel section of the engine. |
$ 1,748.01
-
+
|
|
1-2 weeks delivery time The Bukh 033D8101 propeller shaft (30x1500mm) is a precision drive-line component used to transmit torque from the gearbox to the propeller in marine propulsion systems. Built for dependable power transfer and smooth running, it is a strong choice for refits and replacements where correct shaft sizing and reliable drivetrain alignment matter. |
$ 1,475.10
-
+
|
|
1-2 weeks delivery time The Bukh 500 mm intermediate pipe is designed for marine engine installation and connection applications. |
$ 865.71
-
+
|
|
1-2 weeks delivery time The Bukh 033E8659 header tank unit with cover supports stable coolant management in a marine engine cooling system by providing a fill and expansion point for the freshwater circuit. Supplied with its cover and referenced as a replacement for earlier part number 008E8659, it helps maintain proper coolant level control and tidy, secure system operation onboard. |
$ 827.79
-
+
|
|
1-2 weeks delivery time The Bukh 033E9753 painted cover is a thermostat housing cover designed to close and protect the thermostat housing on BUKH marine diesel engines. It helps keep the thermostat assembly properly enclosed as part of the engine cooling system, supporting clean installation and dependable temperature control operation. |
$ 215.97
-
+
|
|
1-2 weeks delivery time The Bukh leak oil connection is designed for DV48 marine diesel fuel return or leak-off system applications. |
$ 1,134.77
-
+
|
|
1-2 weeks delivery time The Bukh 033T1710 turbocharger kit is a complete replacement kit for boosting performance on BUKH DV48 and DV32 marine diesel engines. Designed to restore proper forced-induction operation, it supports efficient air delivery to the engine for strong, consistent running; for DV32 installations, adapter kit 022T1709 must also be ordered to ensure correct fitment. |
$ 5,807.43
-
+
|
|
1-2 weeks delivery time The Bukh complete gasket set is designed for DV48 marine diesel engine service and sealing applications. |
$ 1,817.95
-
+
|
|
1-2 weeks delivery time The Bukh 033T4310 water-cooled exhaust manifold is a marine exhaust component for BUKH DV48 engines, designed to route exhaust gases while using engine cooling water to control surface and gas temperatures. As a direct replacement manifold, it supports safe, stable exhaust flow and helps protect nearby engine-room components from excess heat. |
$ 714.22
-
+
|
|
1-2 weeks delivery time The Bukh 037D4202 cylinder head sealing set is built to restore a tight, dependable seal between the cylinder head and engine block on BUKH DV10LSME marine diesel engines. Designed for head service work, it helps maintain compression while keeping coolant and oil passages properly separated for stable, efficient running. |
$ 342.86
-
+
|
|
1-2 weeks delivery time The Bukh flywheel with gear rim is intended for DV20, DV24, DV29, and DV32 marine diesel drivetrain applications. |
$ 1,282.94
-
+
|
|
1-2 weeks delivery time The Bukh 038E9079 valve cover is a top-end engine cover designed for BUKH DV24 and DV32 marine diesel engines. Fitted over the valve train, it helps contain engine oil, protects internal components from contamination, and supports clean, service-friendly access during routine maintenance. |
$ 919.42
-
+
|
|
1-2 weeks delivery time The Bukh auto drain hose is intended for marine engine drain system applications. |
$ 5.62
-
+
|
|
1-2 weeks delivery time The Bukh camshaft oil seal installer is intended for marine diesel camshaft seal service operations. |
$ 91.09
-
+
|
|
1-2 weeks delivery time The Bukh valve stem oil seal installer is intended for marine diesel valve seal service operations. |
$ 37.07
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.