Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus MP00GEN remote control panel unit (MP00G) is intended for generator installations, providing an interface for remote operation of generator functions and for monitoring generator performance from a distance.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus HT5146 filtration element is a hydraulic system filter intended for use with the HT1010 hydraulic tank. It provides an efficient filtration mechanism to remove contaminants from the hydraulic circuit, supporting smooth operation and helping reduce maintenance requirements, with installation and servicing described as straightforward.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus GLX14SIC generator set in a soundproof housing is rated at 14kVA with single-phase 230V, 50 Hz output and a stated operating speed of 1500 rpm. It is specified with IP55 protection, maximum voltage variance of ±2%, and installation limits of 15° fore and aft and 25° athwartships; dimensions are 1012 x 587 x 641 mm including the sound hood, with stated maximum ambient temperature of 40°C and maximum raw water temperature of 30°C, and a GLX noise level of 57 dB(A) when installed with the soundproof box.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus GLX14TIC generator set is a complete 14 kVA power generation unit providing 3-phase 400 V output at 50 Hz, supplied with a sound hood for reduced noise operation. It is specified with a maximum speed of 1500 RPM, uses the Vetus engine model M4.45, and has IP55 protection with a stated maximum voltage variance of ±2% and an overall weight of 395 kg.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus GLX6,5SIC generator set with sound hood is a complete marine power generation unit from the VETUS GX range, which spans 6 kVA to 20 kVA and is available for 50 or 60 Hertz outputs. It is specified with maximum voltage variance of ±2%, IP55 protection, and a maximum ambient temperature of 40°C; the supplied sound-proof box provides a stated noise level of 57 dB(A). Additional limits include maximum raw water temperature of 30°C and maximum continuous inclination angles of 15° fore and aft and 25° athwartships.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus BG30/1000 stern tube assembly is a glassfibre reinforced polyester (GRP) shaft support component for marine propulsion installations, supplied with an integrated cutlass bearing. It is specified for 30 mm diameter propeller shafts and is stated with a tube length of 1081.5 mm, intended for water-lubricated propeller shaft assemblies requiring a GRP stern tube of this specification.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus BG35/1000 GRP stern tube assembly is a polyester (G.R.P.) tube intended for water-lubricated propeller shaft installations, specified with a 35 mm diameter and a stated length of 1081.5 mm (product designation lists L=1000 mm). Supplied with a cutlass bearing for shaft support, it is intended to be directly bonded into the hull as part of a marine propulsion shaft line.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus BG35/2000 GRP stern tube unit is a polyester stern tube for a water-lubricated propeller shaft assembly, supplied with an integrated cutlass bearing. It is specified with a Ø35 mm diameter and a stated length of 2081.5 mm, and it must be directly bonded into the hull for installation.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus EHPRSET08 coupling set is a three-piece compression fitting kit supplied with olives and support sleeves for connecting VETUS EHPR series electro-hydraulic pumps (EHPA, EHPB, EHPC) to Vetus HS04N 6x8mm nylon tubing. It is intended to provide a secure hydraulic connection between the pump assembly and the specified tubing size.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus M213A402A diesel propulsion package integrates a Mitsubishi M2.13 marine diesel engine with a TMC40 gearbox configured for i=2.0 reduction and a straight outlet. Rated at 12PS / 8.8KW at 3,000 rpm, the engine is a 2-cylinder 635cm³ unit with a 2-circuit cooling system and a 12V electrical system. Supplied as a package with an MP10B12 panel, a Technodrive TMC40P gearbox, four flexible engine mounts (type KSTEUN25V), and a pre-installed oil suction pump, and it includes a water-cooled aluminum engine cover intended to reduce engine compartment temperatures and contribute to reduced engine noise.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus M218A402A marine diesel propulsion package integrates a Mitsubishi M2.18 2-cylinder engine with a Technodrive TMC40P gearbox (reduction i=2.0, straight outlet). Rated output is 16PS / 11.8KW at 3600 rpm with a displacement of 635cm³, and the unit is specified with 2-circuit cooling and a 12V electrical system. Supplied equipment includes an MP10B12 instrument panel, four flexible engine mounts (type KSTEUN35V), a pre-installed oil suction pump, and a water-cooled aluminum engine cover intended to reduce engine compartment temperature by up to 15°C while contributing to noise suppression.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus M218A405A marine diesel engine package is based on the Mitsubishi M2.18 and is specified with a Technodrive TMC40P gearbox featuring a straight outlet and a 2.6 reduction ratio. Rated at 16PS / 11.8KW at 3600 rpm, it is a 2-cylinder, 635cm³ unit with a 2-circuit cooling arrangement and a 12V electrical system, and it is supplied with an MP10B12 instrument panel, four flexible engine mounts (type KSTEUN35V), and a pre-installed oil suction pump.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus M329A402A marine diesel engine package combines a Mitsubishi M3.29 3-cylinder (952 cm³) power unit rated at 27.2 HP / 20 kW at 3,600 rpm with a Technodrive TMC40P gearbox (straight outlet) and 2.0 reduction ratio. The configuration includes 2-circuit cooling, a 12 V electric system with MP22BS12 panel, and is supplied with the standard instrument panel MPA22KBS2, four flexible engine mounts type KSTEUN40V, and a pre-installed oil suction pump.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus M445A602A marine diesel engine package (Mitsubishi M4.45 with TMC60 i=2.0) is a 4-cylinder, 4-stroke propulsion engine rated at 42 PS / 30.9 kW at 3,000 rpm with 1,758 cm³ displacement. It specifies 98 Nm maximum torque at 3,200 rpm, a 78 x 92 mm bore x stroke, swirl/prechamber combustion, and a heat exchanger cooling arrangement described as a 2-circuit cooling system. The engine operates on a 12V electric system (alternator 12V/110A) and is listed with a maximum installation angle of 15°, weight with gearbox of 185 kg, and service connections including 50 mm exhaust diameter, 20 mm cooling water inlet, and 8 mm diesel inlet/return; engine mounts (KSTEUN75) and dashboard (MP22BS12A) are included.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus M456A605A propulsion engine and gearbox package combines a Mitsubishi M4.56 turbocharged four-cylinder engine (1758 cm³) with a Technodrive TMC60E gearbox with straight outlet and 2.45:1 reduction. Rated at 38.3 kW (52 hp) at 3,000 rpm, it is specified with a 2-circuit cooling system and a 12V electrical system with MP22 panel.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus NOSKIDS sample set is a set of anti-slip deck teak EVA foam samples intended to provide a firsthand evaluation of the material’s quality and performance. Supplied as a sample kit for testing purposes or small-scale projects, it allows assessment of Vetus EVA foam decking characteristics before wider use.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus SA25/1500 propeller shaft assembly is a fully machined 25 mm stainless steel screw shaft with a 1500 mm length, manufactured from duplex stainless steel 1-4462 Niro for marine corrosion resistance. It conforms to ISO 4566 and is machined with a 1:10 taper and keyway on one end; supply includes a matching key, tab washer, and a propeller nut with integrated zinc anode, plus a cap nut complete with a zinc anode.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus SA30/2500 propeller shaft assembly is a Duplex 1-4462 (Niro) stainless steel screw shaft supplied with a cap nut/end nut incorporating an integrated zinc anode for corrosion protection in marine propulsion systems. It is manufactured with meticulous machining, conforms to ISO 4566 for taper and key dimensions, and is specified at 2500 mm length with a 30 mm shaft diameter.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus OPS0752 oil pressure monitoring switch is a double pole unit for 12/24V electrical systems, specified with a 0.75 bar pressure rating and an M10 x 1K threaded connection. Intended for marine applications, it is used to monitor engine oil pressure to support safe operation where oil pressure fluctuation protection is required.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus P3B12X10L propeller assembly is a 3-bladed, left-handed manganese bronze marine propeller with a 12-inch diameter and 10-inch pitch. It is specified with a disk area ratio (Fa/F) of 0.52 and is designed for a 25 mm shaft hole diameter with a 1:10 taper for vessel propulsion applications.
|
Our managers will contact you and clarify the terms of the order
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.