ID
1075934
$ 2,052.81
1-2 weeks delivery time
-
+
The Jabsco 51580-2001 bronze flexible impeller pump delivers dependable, heavy-duty fluid transfer for marine and industrial use, combining a stable foot-mounted design with 1 inch BSP threaded ports for straightforward installation. This manual clutch driven, engine belt-driven pump features bronze construction, a neoprene impeller, and a carbon/ceramic mechanical seal, providing a nominal flow rate of 24.5 GPM (81.33 LPM) plus self-priming up to 15 ft (4.5 m) vertical lift. Designed for bilge and deck wash service and more, it supports multi-position mounting, low- or high-speed priming, and operation up to 2200 rpm, with spare parts available.
- Description
- Ask a Question
-
Jabsco 51580-2001 Manual Clutch Flexible Impeller Pump Unit
The Jabsco 51580-2001 is a robust bronze flexible impeller pump built for demanding marine and industrial duties. With a foot-mounted base for stability and BSP threaded ports for easy fitting, it is suited to tasks ranging from bilge pumping and deck wash to engine cooling and general-purpose transfer.
Application
- Engine cooling
- Bilge pumping
- Washdown and deck flooding
- Ballast transfer
- Fire fighting
- Circulation and transfer of water
- Sump drainage
- Cellar drainage
- Emergency pumping
- Waste water removal
- Shallow well pumping
- Ditch drainage
Technical Specifications
Brand Jabsco Part Number 51580-2001 Pump Type Flexible impeller pump Drive Type Manual clutch driven; belt driven from the engine Construction Bronze pump body Impeller Material Neoprene Shaft Seal Carbon/ceramic mechanical seal; mechanical face type Port Size 1 inch Port Thread BSP (threaded ports) Size 80-size Nominal Flow Rate 24.5 GPM (81.33 LPM) Performance Point 24.5 GPM at 10 ft total head at 1500 rpm Self-Priming Capability Up to 15 ft (4.5 m) vertical lift Maximum Speed 2200 rpm Mounting Foot mounted; multi-position mounting; may be mounted in any position
Product Details
- Port orientation: Horizontally oriented ports.
- Flow direction: Intake and discharge ports are determined by the direction of shaft rotation; pumps in either direction with equal efficiency.
- Priming guidance: Suction lines must be airtight for self-priming. If fluid does not enter after 30 seconds, stop the pump and check the inlet hose for leaks and/or blockages.
- Dry running limit: Do not run dry for more than 30 seconds; the neoprene impeller depends on the pumped liquid for lubrication.
- Service: Spare parts available.
Features
- Heavy-duty bilge and deck wash pump for leisure and commercial craft
- Bronze body with neoprene impeller and carbon/ceramic mechanical seal
- Self-priming performance at low or high speeds
- Handles thin or viscous liquids and more solids in suspension than other rotary pumps (as described)
- Clutch pulley accommodates both A and B type pulley belts
- Designed to be easily serviced and maintained
- Bilge debris presents no problems to this robust, bronze-bodied flexible impeller pump (as described)
- Dependable manual control for tough conditions (as described)
-
Popular products
-
-
-
1-2 weeks delivery time$ 559.40 -
1-2 weeks delivery time$ 450.61 -
-
1-2 weeks delivery time$ 561.64 -
1-2 weeks delivery time$ 587.56 -
1-2 weeks delivery time$ 690.39 -
1-2 weeks delivery time$ 713.02 -
