Jabsco 50580-2301 - 1B/24V 080BSP Bronze Clutch Pump

Jabsco 50580-2301 Bronze Clutch-Driven Pump Unit

The Jabsco 50580-2301 is a robust 80-size, foot-mounted bronze pump designed for demanding fluid handling duties across marine and industrial environments. Built as a flexible impeller pump with an electromagnetic clutch, it supports belt-driven use from an engine and can be controlled remotely for convenient operation outside the engine room.

Application

• Marine: engine cooling
• Marine: bilge pumping
• Marine: washdown and deck flooding
• Marine: ballast transfer
• Marine: general purpose pumping
• Marine: fire fighting
• Industrial: circulation and transfer of water
• Industrial: sump drainage
• Industrial: cellar drainage
• Industrial: emergency pumping
• Farming and agriculture: waste water removal
• Farming and agriculture: shallow well pumping
• Farming and agriculture: ditch drainage

Technical Specifications

Product Details

• Pump type: Bronze flexible impeller pump with electromagnetic clutch
• Construction: Marine quality bronze and stainless steel
• Pump body material: Bronze
• Impeller material: Neoprene
• Shaft seal: Carbon/ceramic mechanical seal
• Bearings: Twin row ball type bearings
• Operation note: Electromagnetic clutches will only engage as long as electrical power remains available
• Control options: Can be operated remotely via float or Hydro Air switches
• Dry-running protection option: Fitting a vacuum switch eliminates all risk of dry running damage
• Installation notes: Pumps must be securely mounted on a rigid surface; pumps can be mounted in any position; if mounted vertically, ensure the bearings are above the pump head
• Priming note: If fluid does not enter the pump after 30 seconds, stop the pump and check the inlet hose for leaks and/or blockages
• Additional note: Pump is close coupled to a motor

Features

• Self-priming pump design
• Heavy-duty bilge and deck wash capability
• Handles hard and soft solids without clogging
• Bilge debris presents no problems for the robust bronze-bodied design
• Will tolerate abrasive wear
• Can pump in either direction
• Will not airlock
• Easy to service and maintain
• Can be remotely controlled from outside the engine room
• Can be automatically shut off by fitting a vacuum cut-off switch

Spare Parts

• Impeller and gasket kit (Neoprene): Catalog 920-0001-P
• Vacuum switch: Catalog 4732-0000

Important Notes

• Do not run dry.
• Do not use this pump for gasoline, petrol, petroleum products, or any products with a flash point below 37°C.
• Do not operate the pump outside the published limits.