ID
1075920
$ 1,309.76
1-2 weeks delivery time
-
+
The Jabsco 50580-2201 bronze pump is a foot-mounted 80-size flexible impeller unit with 1 inch BSP threaded ports and a 12 VDC electromagnetic clutch for dependable fluid transfer. Its bronze construction with a neoprene impeller and carbon/ceramic mechanical seal supports heavy-duty marine use such as bilge and deck wash, with self-priming capability and strong flow performance. Designed for belt-driven operation with a 1B pulley, it also supports remote clutch control and is built for serviceability in demanding onboard environments.
- Description
- Ask a Question
-
Jabsco 50580-2201 Electromagnetic Clutch Bronze Pump Unit
The Jabsco 50580-2201 is a heavy-duty bronze flexible impeller pump designed for reliable onboard water movement, including bilge and deck wash duties on leisure and commercial craft. With a foot-mounted layout, 1 inch BSP threaded ports, and a 12 VDC electromagnetic clutch, it supports secure installation, engine-driven belt operation, and convenient control for demanding marine workflows.
Application
- Marine: engine cooling
- Marine: bilge pumping
- Marine: washdown and deck flooding
- Marine: ballast transfer
- Marine: general purpose pumping
- Marine: fire fighting
- Industrial: circulation and transfer of water
- Industrial: sump drainage
- Industrial: cellar drainage
- Industrial: emergency pumping
- Farming and agriculture: waste water removal
- Farming and agriculture: shallow well pumping
- Farming and agriculture: ditch drainage
Technical Specifications
Catalog Number 50580-2201 Pump Type Flexible Impeller Pump With Electromagnetic Clutch Size 80-size Mounting Foot mounted Ports 1 inch BSP threaded ports Clutch Voltage 12 VDC Pulley 1B pulley Pulley Diameter 7 inches Flow Rate 24.5 GPM at 10 ft total head at 1500 rpm Self-Priming From dry up to 2.4 m Maximum Speed 2200 rpm Liquid Temperature Limits 45 °F to 180 °F (7 °C to 82 °C)
Product Details
- Construction: Bronze construction (marine quality bronze and stainless steel are referenced)
- Impeller Material: Neoprene
- Shaft Seal: Carbon/ceramic mechanical seal
- Bearings: Twin row ball type bearings
- Drive and Control: Belt driven from the engine; electromagnetic clutches can be operated remotely via float or Hydro Air switches
- Dry-Run Protection Option: Fitting a vacuum switch eliminates risk of dry running damage (clutch engages only while electrical power is available)
- Operational Notes: Pumps must be securely mounted on a rigid surface; can be mounted in any position; if mounted vertically, keep bearings above the pump head
- Priming Guidance: If fluid does not enter after 30 seconds, stop and check inlet hose for leaks and/or blockages
- Rotation Note: Pump shaft rotation determines inlet and outlet port location
- Additional Note: Pump is stated as close coupled to a motor
Features
- Self-priming design
- Handles hard and soft solids without clogging
- Bilge debris presents no problems to the robust bronze-bodied design
- Will tolerate abrasive wear
- Can pump in either direction
- Will not airlock
- Easy to service and maintain
Operating Restrictions
- Do not run dry.
- Do not use for gasoline, petrol, petroleum products, or any products with a flash point below 37 °C.
Spare Parts Available
- 920-0001-P: Impeller and gasket kit, neoprene
- 4732-0000: Vacuum switch
-
Popular products
-
-
-
-
-
-
1-2 weeks delivery time$ 3,289.50 -
1-2 weeks delivery time$ 71.52 -
-
1-2 weeks delivery time$ 570.29 -
1-2 weeks delivery time$ 661.50