ID
1213477
$ 1,309.76
1-2 weeks delivery time
-
+
The Jabsco 50580-2001 flexible impeller pump with electric clutch delivers high-performance fluid transfer for marine, industrial, and agricultural use, combining a rugged bronze body with a stainless steel shaft for long service life. It provides 80 liters per minute (17.5 gallons per minute) at 1500 RPM and self-primes up to 2 meters (6.56 feet), making it well-suited to bilge and deck wash systems, water transfer, and general fluid handling with clean or lightly contaminated water. A 12V DC clutch with 2A pulley supports controlled operation, while 1 inch BSP internal threaded ports simplify installation; a nitrile impeller option is noted for oily water applications.
- Description
- Ask a Question
-
Jabsco 50580-2001 Flexible Impeller Pump With 12V Electric Clutch
The Jabsco 50580-2001 is a heavy-duty bronze flexible impeller pump built for demanding fluid-handling tasks across marine, industrial, and agricultural environments. With a 12V DC electromagnetic clutch for controlled engagement and a robust construction designed to resist harsh conditions, it is a strong choice for bilge and deck wash duties, water transfer, and general-purpose pumping where reliable priming and high flow are required.
Application
- Bilge pumping
- Deck wash and washdown
- Water transfer and general fluid handling
- Engine cooling (listed as a typical marine application)
- Ballast transfer and deck flooding (listed as typical marine applications)
- Fire fighting (listed as a typical marine application)
- Industrial circulation and water transfer
- Sump, cellar, and emergency drainage
- Farming and agricultural wastewater removal, shallow well pumping, and ditch drainage
Technical Specifications
Model 50580-2001 Pump Type Bronze Flexible Impeller Clutch Pump Voltage 12V DC Clutch Electric / electromagnetic, with 2A pulley Output 80 liters per minute (17.5 gallons per minute) at 1500 RPM with 3 meters total head Additional Performance Note 24.5 GPM at 10 ft total head at 1500 RPM Self-Priming Lift Up to 2 meters (6.56 feet); also referenced as up to 2.4 meters in additional notes Maximum Pressure 2.5 bar (36.25 PSI) Connections 1 inch BSP internal threaded ports Discharge Port Size 1 inch BSP Impeller Material Neoprene (nitrile impeller option available for oily water applications) Impeller Diameter 2.8 inches (71 mm) Body Material Bronze Shaft Material Stainless steel Shaft Seal Mechanical shaft seal (carbon/ceramic) Fuse Size 5 amps Pulley Diameter 7 inches Mounting Foot-mounted Pump Dimensions 160 mm x 180 mm (6.3 inches x 7.09 inches) Weight 7.51 kg (approximately 8.51 kg packed) Temperature Range -10°C to +60°C (14°F to 140°F); additional notes list 7°C to 82°C (45°F to 180°F) Maximum Speed Note 2200 RPM (do not operate outside published limits) Certifications CE, ISO 9001
Product Details
- Construction: Bronze body with stainless steel shaft for durability in harsh environments.
- Controlled engagement: Electromagnetic clutch can be operated remotely via float or Hydro Air switches (as stated).
- Dry-run protection option: A vacuum switch is noted to eliminate the risk of dry running damage.
- Bearings: Twin row ball type bearings (as stated).
- Serviceability: Described as easy to service and maintain.
Features
- Self-priming capability for reliable startup
- Handles moderate amounts of suspended solids; bilge debris is stated to present no problems
- Handles hard and soft solids without clogging and will tolerate abrasive wear (as stated)
- Can pump in either direction
- Will not airlock (as stated)
Important Operating Notes
- Do not run dry.
- Do not use for gasoline, petrol, petroleum products, or any product with a flash point below 37°C.
- If fluid does not enter the pump after 30 seconds, stop the pump and check the inlet hose for leaks and/or blockages.
-
Popular products
-
-
1-2 weeks delivery time$ 3,052.98 -
1-2 weeks delivery time$ 1,992.01 -
-
-
-
-
1-2 weeks delivery time$ 3,289.50 -
1-2 weeks delivery time$ 71.52 -
