The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 14346-0002B impeller replacement unit delivers efficient water pumping with a 12-blade EPDM rubber design that resists heat, chemicals, oils, and wear. Its 95 mm diameter, 64 mm depth, and 25 mm shaft size suit medium-pressure service up to 4 bar (58 PSI), while the double flat drive and plastic insert provide a secure shaft connection and added durability. Certified food-safe to FDA and EU requirements (also listed with 3A), it is suitable for marine, industrial, and food processing use in both freshwater and saltwater environments, with an operating temperature range of -30°C to 120°C and a maximum speed of 3,500 RPM.
|
$ 592.58
-
+
| ||
|
1-2 weeks delivery time The Jabsco 14346-0003B flexible impeller is a nitrile impeller with 12 blades and a double flat drive, built for efficient pumping of fuel or water contaminated with oil or diesel. Its robust nitrile construction and plastic insert support durable, reliable operation, backed by rigorous quality control. The design targets media containing oil and is stated for use in an approximate 10°C to 90°C temperature range.
|
$ 494.32
-
+
| ||
|
1-2 weeks delivery time The Jabsco 14346-0005B food-grade neoprene impeller is a high-performance replacement component for marine, industrial, and food-processing pump applications. Its 12-blade design, double flat drive hub, and plastic insert support secure installation and efficient circulation, while the 95.25 mm diameter, 63.5 mm depth, and 25.4 mm shaft size match compatible pump requirements. Rated for medium pressure, up to 5 bar operating pressure and 3,600 RPM maximum speed, it is specified for fluids such as water, food-grade liquids, light oils, and compatible chemicals, with FDA and 3A certifications listed and operating temperature ranges stated as approximately 4°C to 70°C and -20°C to 82°C.
|
$ 435.36
-
+
| ||
|
1-2 weeks delivery time The Jabsco 14609-0001B neoprene impeller is a standard 6-blade water pump impeller for marine and industrial use, built with a single flat drive hub and an 8 mm shaft size. Its 32 x 12 mm dimensions and approx. 4°C to 80°C operating temperature range support dependable pumping of water and other simple fluids, with a brass insert and high-pressure suitability noted for demanding applications.
|
$ 136.17
-
+
| ||
|
1-2 weeks delivery time The Jabsco 14750-0001B neoprene impeller is an 8-blade replacement rotor for Jabsco rubber impeller pumps, built with a single flat drive and a 8 mm shaft fit. Its 32 x 12 mm size and brass insert support dependable circulation for water and other simple media in marine and industrial applications, with a recommended operating temperature range of approximately 4°C to 80°C. For long idle periods, lubrication is recommended to help prevent sticking and maintain reliable pump start-up.
|
$ 59.98
-
+
| ||
|
1-2 weeks delivery time The Jabsco 14750-0003-P nitrile impeller service kit is engineered for marine pump systems, combining wear and corrosion resistance with reliable, long-lasting operation. It includes a nitrile impeller (profile B) with a single flat drive plus a gasket set (including gasket 7828-0000) and impeller lubricant for straightforward replacement. With a 32 mm diameter, 12 mm depth, 8 mm shaft diameter, and 8-blade design with a brass insert, it matches the same impeller used in 14750-0003B and 14750-0003.
|
$ 81.27
-
+
| ||
|
1-2 weeks delivery time The Jabsco 15278-1000 flapper subassembly kit is a precision-engineered spare part designed to support reliable performance and long service life in marine and industrial pump systems. Built with durable construction and dependable functionality, it helps simplify upkeep with easy installation and maintenance for demanding environments.
|
$ 588.09
-
+
| ||
|
1-2 weeks delivery time The Jabsco 15294-1020 wear ring service kit supports ongoing pump maintenance by supplying a wear ring and an M12 set screw in one package. Intended for use on compatible Jabsco pump models, it helps restore reliable operation and reinforces the value of regular wear-component replacement for long-term pump performance. Installation instructions are included to guide correct fitment.
|
$ 784.14
-
+
| ||
|
1-2 weeks delivery time The Jabsco 15296-1000 kit plate component is a precision-crafted spare part designed to upgrade and support marine pump system operation. Engineered for reliability in demanding marine environments, it helps enhance pump efficiency while promoting smooth operation and long-lasting performance using high-quality materials.
|
$ 1,544.38
-
+
| ||
|
1-2 weeks delivery time The Jabsco 15297-1010 cam ring kit is an essential marine spare-part component engineered for durability and reliability in demanding environments. Its precision design supports smooth operation and dependable performance, helping extend service life for greater confidence on the water.
|
$ 1,233.60
-
+
| ||
|
1-2 weeks delivery time The Jabsco 15298 1020 Vortex bronze impeller service kit supports reliable water circulation to help prevent overheating and maintain optimal marine engine conditions. Built from durable bronze and designed for straightforward installation, this upgrade kit is made for a smooth replacement process and includes the necessary components, including a wear ring spare part for Jabsco.
|
$ 2,526.95
-
+
| ||
|
1-2 weeks delivery time The Jabsco 15299-1000 flexible impeller is a neoprene impeller designed for efficient pumping of fresh or salt water in water cooling systems. Its corrosion-resistant construction supports reliable performance in marine environments and can be used in systems with small amounts of oil or diesel fuel. Regular replacement is recommended to maintain dependable, efficient operation.
|
$ 976.67
-
+
| ||
|
1-2 weeks delivery time The Jabsco 15574-0000 bearing housing kit is a high-quality replacement component engineered for Jabsco 15570 series pumps, helping maintain pump efficiency and durability through a precise fit and reliable housing solution built to the original equipment specifications.
|
$ 2,100.44
-
+
| ||
|
1-2 weeks delivery time The Jabsco 15780-0000 Vortex engine cooling pump delivers high-performance sea water cooling for Cummins marine diesel engines, combining a self-priming flexible impeller stage with a high-flow bronze centrifugal impeller. Built with a bronze pump body and marine-quality bronze and stainless steel construction, it supports flow up to 400 GPM and uses flanged ports for robust connections. This bare-shaft pump is designed for Cummins K38, K50, KTA38, and KTA50 applications, and matches Cummins part numbers 3393018, 4314820, and 4314522; the neoprene impeller relies on pumped liquid for lubrication and should not be run dry for more than 30 seconds.
|
$ 17,125.67
-
+
| ||
|
1-2 weeks delivery time The Jabsco 16470-0025 pressure switch service kit provides a multi-voltage (12V and 24V) 25 PSI pressure switch solution for Jabsco Par-Max HD series freshwater delivery pumps. Supplied as an installation-ready kit, it includes a switch assembly, wire leads, a switch diaphragm, heat shrink butt connectors, and screws, making it a practical replacement package for maintaining consistent pump pressure control.
|
$ 68.86
-
+
| ||
|
1-2 weeks delivery time The Jabsco 16470-0040 pressure switch kit provides 40 psi pressure control for Jabsco Par-Max HD freshwater delivery pumps, supporting quick replacement with included wiring and mounting accessories. The kit features a star design with side-mounted leads and includes the switch assembly, wire leads, diaphragm, connectors, and screws to help restore reliable pump cut-in/cut-out operation. Compatible pump models and identifiers are provided, including supplier code 16470-0040, order number 00322112, and barcode 671880841443, with a listed shipping weight of 0.30 kg.
|
$ 53.58
-
+
| ||
|
1-2 weeks delivery time The Jabsco 16470-0060 pressure switch service kit provides dependable pressure control at 60 psi (4.3 bar) for compatible multiplex pump systems. Its distinctive star design and side-mounted leads support straightforward installation, while the EPDM specification and included screws make it a practical spare part solution for maintenance or upgrades.
|
$ 64.61
-
+
| ||
|
1-2 weeks delivery time The Jabsco 16470-0070 pressure switch service kit delivers precise pressure regulation up to 70 psi (4.8 bar) for compatible pump systems. Its star-design switch body supports durable operation, while side-exit leads help simplify installation and servicing. Supplied as a service kit with screws and built with EPDM, it is compatible among others with Jabsco PAR-MAXplus and Flojet VersiJet Multiplex pumps, and can be used as an alternative to Flojet 20380070A.
|
$ 64.61
-
+
| ||
|
1-2 weeks delivery time The Jabsco 17018-0001-P impeller service kit is a premium neoprene replacement designed to restore efficient fluid movement in marine pump systems. Built with an 8-blade rotor, spline-drive hub, and corrosion-resistant metal insert, it replaces Jabsco OEM part numbers 17018-0001-P and 17018-0001 and also cross-references CEF 500177 and JMP 7446. With a 65 mm outside diameter, 76.2 mm depth, and 16 mm spline shaft fit, the kit supports reliable pump performance and includes a gasket set (890-0000) plus impeller lubricant for a complete service.
|
$ 113.44
-
+
| ||
|
1-2 weeks delivery time The Jabsco 17018-0001B flexible impeller is an 8-blade neoprene rotor with spline drive (profile M) built for efficient water circulation in marine engine cooling systems. With a 65 mm diameter, 76.2 mm height, and 16 mm shaft size, it supports durable, consistent water flow under strict quality controls. It is equivalent to Jabsco 17018-1101B and 17018-0001-P, widely used on Volvo D6 and D9 engines and large Mercruiser diesel engines, and cross-referenced to Caterpillar and Volvo replacement numbers.
|
$ 124.77
-
+
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.