BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 000E5283 circulation pump shaft is a precision drive component for the circulation pump on BUKH DV36 and DV48 marine diesel engines. Installed within the pump assembly, it supports smooth rotation of the internal pump elements to keep coolant moving through the engine, helping maintain stable operating temperature during continuous marine operation.
|
$ 506.24
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5284 spacer tube is a precision distance sleeve used in the circulation pump assembly on BUKH DV36 and DV48 marine diesel engines. It supports correct pump component spacing and alignment, helping the pump run smoothly and maintain consistent coolant flow through the engine’s cooling circuit.
|
$ 108.49
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5360 exhaust sealing gasket is designed to secure a tight, leak-resistant joint in the exhaust system on BUKH DV36 and DV48 marine diesel engines. Used at the exhaust manifold connection and within the air inlet and turbocharger assembly on DV48 applications, it helps maintain correct exhaust flow, protects surrounding components from hot gas leakage, and supports dependable engine performance.
|
$ 18.48
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5421 governor shaft is a precision engine shaft used in the governor and regulating handle system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines, supporting accurate speed control and stable throttle response. This same shaft is also applied within the DV24RME camshaft and lubricating oil pump and filter assembly, helping keep key mechanical drives aligned and operating smoothly.
|
$ 255.51
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5422 nylon friction disc is a plastic bushing-style element for the governor shaft used on BUKH DV24RME, DV29RME, and DV32 marine engines. Installed within the governor and regulating handle assembly, it helps provide controlled friction for stable, precise throttle and speed adjustment; it is also used on DV24RME applications within the camshaft and lubricating oil pump and lubricating oil filter assembly.
|
$ 57.08
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5685 undersize main bearing liner set is a 0.6 mm main bearing solution for BUKH DV36 and DV48 engines, intended for the crankshaft main bearing positions within the crankshaft and bearing assembly. Supplied as two matching shells (one smooth, one with an oil groove and oil feed hole), it supports stable crankshaft alignment and reliable oil distribution under marine operating loads.
|
$ 285.76
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5827 rifle bushing is a precision support component used to locate and stabilize mating parts in Bukh marine engine assemblies. As a replacement bushing, it helps maintain correct alignment, promotes smooth operation, and reduces wear in the surrounding components during continuous marine duty.
|
$ 467.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5829 sacrificial zinc anode is a saildrive corrosion-protection component for BUKH DV10SME and DV48SME marine diesel installations. Designed to be consumed in service, it helps shield underwater saildrive metal components from galvanic attack, supporting longer service life and dependable operation in harsh seawater environments.
|
$ 170.26
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6018 oil pipe is a dedicated oil-line component used in the oil sump and bilge pump pipework on BUKH DV36 and DV48 marine diesel engines. Installed at the rear-end assembly area around the rotating weight and fuel lift pump, it supports correct oil routing within the engine’s lubrication system for dependable operation.
|
$ 357.64
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6036 rubber coupling element is a flexible clutch and coupling component used in the drivetrain interface on multiple BUKH marine diesel engines. Installed in the reversing gear mounting (M 60) on DV24RME, DV29RME, and DV32 engines, and at the rear-end rotating weight and fuel lift pump drive on DV36 and DV48 engines, it helps cushion torsional shocks and supports smoother power transmission.
|
$ 165.86
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6037 crankshaft-side flexible coupling half with cone provides a secure, aligned connection for reversing gear installation on BUKH DV-series marine diesel engines. Designed for the M60 reversing gear mounting arrangement, it helps transmit torque smoothly while the flexible coupling design supports quieter, more controlled drivetrain operation on DV24RME, DV29RME, and DV32 applications.
|
$ 249.92
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6039 flexible coupling half with cone (D 30) is a driveline coupling component used at the rear-end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. Designed to support secure, accurate connection in the coupling arrangement, it helps maintain smooth power transmission and dependable operation in the rear-end drive area.
|
$ 249.92
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6156 thermostat housing cap is a dedicated cover for the thermostat location in the keel cooling system on BUKH DV36 and DV48 marine diesel engines. It helps secure and protect the thermostat housing area to support stable coolant temperature control and dependable engine operation underway.
|
$ 545.60
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6168 angled hose connector elbow is a circulation-pump hose fitting designed for BUKH DV36 and DV48 marine diesel engines. Installed on the circulation pump, it provides a secure angled connection for the cooling hose run, supporting tidy hose routing and dependable coolant flow through the engine’s cooling circuit.
|
$ 205.71
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6250 thermostat for keel-cooled systems regulates coolant temperature on BUKH DV36 and DV48 marine diesel engines. By controlling coolant flow through the keel cooling circuit as the engine warms up, it helps the engine reach and maintain the correct operating temperature for dependable performance underway.
|
$ 245.86
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6252 water pump gear wheel is a precision drive gear used in the cooling water pump system on BUKH DV36 and DV48 marine diesel engines. Installed with the circulation pump and also referenced in the rear-end rotating weight and fuel lift pump assembly, it helps transmit drive to the pump for steady coolant circulation and dependable engine temperature control.
|
$ 1,244.71
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6302 tension clamp secures the tension device hardware used around the injection pump and oil cooler on BUKH DV36 and DV48 marine diesel engines. Designed for a dependable hold in a high-vibration engine space, it helps keep the assembly firmly retained for stable operation underway.
|
$ 76.35
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6339 cylinder head gasket is a critical sealing element for the cylinder head joint on BUKH DV8 and DV10LSME marine diesel engines. It helps maintain proper compression and separates combustion gases from coolant and oil passages, supporting reliable operation and protecting the engine during continuous marine duty.
|
$ 102.05
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6355 fitting set for the oil bilge pump supports secure connections in the oil bilge pump installation on BUKH DV36 and DV48 engines. Used at the rear-end rotating weight and fuel lift pump area, these fittings help route and seal oil bilge pump lines for clean, dependable operation in marine engine service.
|
$ 87.58
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6364 reducing nipple is a compact connection fitting used in the air inlet and turbocharger assembly on BUKH DV48 marine diesel engines. It supports a secure, correctly stepped interface between connected components, helping maintain a tight, dependable air path for stable engine breathing and turbocharger performance.
|
$ 92.40
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.