BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 000E7675 spacer is a distance piece used in the electric start assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps maintain correct component spacing and alignment within the starter mounting arrangement, supporting secure installation and dependable starting performance.
|
$ 17.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7676 cam follower cup is a precision valve-train component used in the camshaft system on BUKH DV29RME and DV32 marine diesel engines, within the engine group covering the camshaft, lubricating oil pump, and lubricating oil filter. It follows the cam profile to support accurate valve actuation, helping maintain smooth, reliable engine operation.
|
$ 192.02
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7697 thermostat housing cap secures the thermostat housing in the keel-cooling system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. By properly enclosing the thermostat location, it supports stable coolant temperature control and helps maintain reliable circulation through the engine’s closed-loop cooling circuit.
|
$ 229.78
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7765 hose retainer secures the coolant water hose in the keel cooling installation on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. By holding the hose firmly in place, it helps maintain clean routing, reduces movement and chafe, and supports reliable coolant circulation throughout the cooling circuit.
|
$ 136.59
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7766 cylinder head gasket provides a secure seal between the cylinder head and engine block on BUKH DV20 marine diesel engines. Designed to maintain proper compression and keep coolant and combustion gases separated, it supports dependable engine operation and is referenced as 000D9687.
|
$ 254.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7810 regulator spring (2.8 mm) is a precision spring element used in the engine regulator mechanism to support stable control response and consistent operation. Designed as a direct-fit replacement part, it helps maintain dependable regulation characteristics in BUKH marine diesel applications that use this spring size.
|
$ 40.96
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7866 rear blank end cover is a dedicated closing cover used in the rear end cover and rotating weights area on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps protect internal rotating components by sealing the rear end-cover position, supporting clean, reliable operation and an OEM-correct fit during service replacement.
|
$ 1,216.07
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7882 clamping flange is a pump-mounting component for BUKH pump 39687 applications, securing the pump connection to help maintain stable alignment and a dependable installation in marine service. This part replaces earlier part number 000E4312 and is intended as a direct-fit Bukh replacement for the pump assembly.
|
$ 73.92
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7986 governor cover is a protective engine cover used on BUKH DV24RME and DV29RME marine diesel engines, fitted around the governor and regulating handle area. It also serves as a cover within the DV24RME camshaft section, helping shield key components around the camshaft, lubricating oil pump, and lubricating oil filter for cleaner, more secure operation in marine engine-room conditions.
|
$ 57.86
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8062 turbocharger air inlet hose is designed for the air inlet and turbocharger connection on BUKH DV48 marine diesel engines. This hose supports smooth, controlled airflow to the turbocharger, helping maintain stable boost delivery and dependable engine performance on board.
|
$ 746.16
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8074 return pipe gasket is a sealing element used in the air inlet and turbocharger assembly on BUKH DV32 and DV48 marine diesel engines. It helps maintain a tight, leak-resistant joint at the return pipe connection, supporting stable airflow and dependable turbocharger operation in marine service.
|
$ 26.52
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8138 spacer pipe is a bracket spacing component for the air inlet and turbocharger assembly on BUKH DV32 marine diesel engines. It helps maintain correct stand-off distance and alignment at the mounting point, supporting secure installation and reducing the risk of stress or misalignment in connected air-handling components.
|
$ 49.01
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8217 hexagon nipple is a short 3/4 BSP threaded connector for the air inlet and turbocharger assembly on BUKH DV48 marine diesel engines. Designed to provide a secure, service-friendly threaded joint, it helps maintain a reliable connection in the boosted air intake system where tight sealing and vibration resistance are critical.
|
$ 286.06
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8344 cooling water outlet cover is a sealing cover component for the keel-cooling outlet on BUKH DV36 and DV48 marine diesel engines. It secures the outlet point in the cooling circuit to help maintain controlled coolant flow and a leak-resistant connection, supporting dependable engine temperature management underway.
|
$ 355.70
-
+
| ||
|
1-2 weeks delivery time The Bukh keel cooling washer is intended for marine engine keel cooling system installation applications.
|
$ 79.71
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8493 claw coupling half is a coupling element for an older-type sprinkler pump drive arrangement. Designed to mate with the matching coupling half, it helps transmit torque while allowing practical service access when removing or refitting the pump in the sprinkler system installation.
|
$ 311.16
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8663 thermostat pipe branch is a keel-cooling pipe designed to route coolant flow at the thermostat cover on BUKH DV36 and DV48 marine diesel engines. It supports correct circulation through the thermostat housing area, helping the cooling system regulate engine temperature reliably under marine operating loads.
|
$ 83.60
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8696 union screw nut is a securing fastener used in the air inlet and turbocharger assembly on BUKH DV48 marine diesel engines. It helps keep connected components firmly clamped in place, supporting a stable, leak-resistant installation in the intake and turbocharging system.
|
$ 38.57
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8870 cylinder head stud set is designed for securing the cylinder head on BUKH DV10 and DV20 marine diesel engines. These studs help maintain correct head clamping force, supporting a stable head-to-block joint and reliable sealing during temperature and load changes in marine operation.
|
$ 135.43
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8938 sealing gasket for the air inlet filter on BUKH DV29RME marine diesel engines helps maintain a tight, clean air path into the intake system. With a 176 x 80 x 1.5 size, it supports proper filter housing sealing to reduce air leakage and protect engine breathing performance in marine operation.
|
$ 64.22
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.