BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 000E4901 hand start shaft is a dedicated shaft component for the manual starting system used on BUKH DV36 and DV48 marine diesel engines. Built for dependable engagement and smooth transfer of input motion during starting, it supports reliable operation of the hand start assembly onboard.
|
$ 1,914.14
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4902 hand-start spring is a replacement tension component for the manual starting system on BUKH DV36 and DV48 marine diesel engines. Installed in the hand-start assembly, it helps maintain the correct return force and engagement feel during cranking, supporting dependable manual starting operation onboard.
|
$ 102.05
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4904 nozzle-holder clamp dog is a clamping piece used to secure the injector nozzle holder in place on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Installed in the cylinder head and valve gear or the fuel injection and valve assembly (depending on engine model), it helps maintain stable injector positioning for reliable fuel delivery and consistent combustion.
|
$ 224.19
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4910 cylinder head cover is a valve cover designed for the crankcase and cylinder head cover area on BUKH DV36 and DV48 marine diesel engines. It closes and protects the valve train area, helping keep the top end of the engine sealed and safeguarded in harsh marine operating conditions.
|
$ 1,143.94
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4911 valve cover sealing gasket is designed to seal the cover joint on BUKH DV36 and DV48 marine diesel engines within the crankcase, cylinder head and covers assembly. It helps maintain proper crankcase sealing by preventing oil mist and seepage at the cover interface, supporting a cleaner engine exterior and dependable operation.
|
$ 114.89
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4912 valve cover retaining nut is a fastening component used on the cylinder head and cover assemblies of BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. It helps secure the valve cover in place to support consistent clamping and dependable sealing, contributing to clean, stable operation in the engine top-end area.
|
$ 23.31
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4914 decompression handle provides dependable manual decompression control for BUKH DV24RME, DV29RME, and DV32 engines in the cylinder head and valve assembly, and also serves as a handle for DV36 and DV48 hand-start arrangements. Built for OEM-style fit and function, it supports easier engine handling during starting and service operations where controlled valve actuation is required.
|
$ 61.09
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4922 thrust bearing is an axial-load bearing element used at the rear end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. It supports controlled axial movement during operation, helping the rotating components run smoothly and reducing wear in this critical rear-end drive area.
|
$ 695.59
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4931 V-belt pulley is a drive pulley used on the flywheel and front-end rotating assembly of BUKH DV36 and DV48 marine diesel engines. It provides the belt contact surface needed to transmit rotational power to belt-driven accessories, supporting stable operation and correct belt routing in the engine’s front-end drive system.
|
$ 1,071.03
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4933 circulation pump rotor is a core rotating element for the cooling-water circulation pump used on BUKH DV36 and DV48 marine diesel engines. Installed inside the pump, it helps drive steady coolant flow through the engine’s cooling circuit to support stable operating temperature and dependable day-to-day running.
|
$ 282.06
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4934 circulation pump cover is a protective housing component for the circulation pump assembly on BUKH DV36 and DV48 marine diesel engines. It helps enclose and safeguard the pump internals, supporting reliable coolant circulation through the engine cooling system for stable operating temperatures underway.
|
$ 358.42
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4935 cooling-water connecting pipe is a rigid coolant line used in the injection pump and oil cooler area on BUKH DV36 and DV48 marine diesel engines. It routes cooling water through this section of the engine, supporting stable oil temperature control and dependable operation of the surrounding components.
|
$ 347.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4941 spacer is an intermediate piece used in the rear end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. It helps maintain correct spacing and alignment of adjoining components, supporting stable operation and dependable fuel supply performance in the lift pump system.
|
$ 615.54
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4942 blind cover is a sealing cover for the impeller pump connection point used on BUKH DV36 and DV48 engines. Installed at the rear-end rotating weight and fuel lift pump assembly area, it closes off the connection to help maintain a clean, secure layout and dependable operation in the engine compartment.
|
$ 131
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4947 injection pump drive gear is designed for the injection pump and oil cooler assembly on BUKH DV36 and DV48 marine diesel engines. This gear helps maintain accurate fuel pump drive timing, supporting consistent fuel delivery and dependable engine operation under marine loads.
|
$ 1,795.92
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4977 intermediate ring is a precision spacer component used within the injection pump and oil cooler assembly on BUKH DV36 and DV48 marine diesel engines. It supports correct alignment and secure fitment of mating parts, helping maintain a stable, leak-resistant interface and reliable operation in the engine’s fuel and cooling-related mounting stack.
|
$ 317.41
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4978 injection pump retaining nut is designed for the injection pump and oil cooler assembly on BUKH DV36 and BUKH DV48 marine diesel engines. It helps secure the injection pump hardware for a stable, vibration-resistant fit, supporting dependable fuel system operation in marine service.
|
$ 156.72
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4985 camshaft is a precision valve-train drive component for BUKH DV36 and DV48 marine diesel engines, used within the crankshaft and reciprocating assembly group. It converts crankshaft rotation into accurately timed valve actuation, helping maintain smooth combustion, correct engine timing, and dependable running under marine duty cycles.
|
$ 2,671
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4987 push rod guide cup is a precision-guiding component used to support and align the push rod in BUKH DV36 and DV48 marine diesel engines. Installed within the engine’s crankshaft and piston assembly group, it helps maintain correct push rod movement for consistent valve train operation and reduced wear under continuous marine duty.
|
$ 188.86
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5014 valve spring retainer secures the valve spring arrangement to support stable valve operation across BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Used within the cylinder head and valve gear (and in the fuel injection and valves group on later models), it helps keep the valvetrain properly located for consistent running under marine load.
|
$ 36.15
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.