BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 000E5025 intake manifold gasket is a sealing element used in the crankcase, cylinder head, and cover area on BUKH DV36 and DV48 marine diesel engines. It helps maintain a tight seal at the intake manifold joint to support stable air intake performance and reduce the risk of leaks during operation.
|
$ 34.56
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5028 exhaust manifold gasket provides a tight, reliable seal between the exhaust manifold and mating surfaces on BUKH DV36 and DV48 marine diesel engines. Fitted within the crankcase, cylinder head and covers assembly group, it helps prevent exhaust leakage, supports correct gas flow, and protects adjacent engine components from heat and soot contamination.
|
$ 51.61
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5035 relief valve piston is a precision internal component used in the injection pump and oil cooler systems on BUKH DV36 and DV48 marine diesel engines. It supports stable pressure control by moving within the relief valve mechanism, helping protect connected components from excessive pressure during operation.
|
$ 302.93
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5036 pressure relief valve spring is a precision spring element used in the relief valve within the injection pump and oil cooler system on BUKH DV36 and DV48 marine diesel engines. It helps the valve regulate pressure correctly, supporting stable lubrication and fuel-system operation under varying engine loads.
|
$ 30.56
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5037 oil pressure adjusting washer is a relief-valve shim used in the injection pump and oil cooler assembly on BUKH DV36 and DV48 marine diesel engines. Installed as an adjusting disc at the relief valve, it helps set and stabilize oil pressure for dependable lubrication and consistent engine operation.
|
$ 8.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5042 oil pipe nipple is a small but critical connection fitting in the DV36 lubrication pump pipework. It supports a secure, leak-resistant joint in the engine’s oil line routing, helping maintain reliable oil flow to protect moving components under continuous marine duty.
|
$ 62.69
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5047 sealing gasket is used in the fuel injection and valves assembly on BUKH DV36 and DV48 marine diesel engines. It helps create a tight seal between mating surfaces to support clean, stable operation of the injection and valve system and to keep the assembly properly secured during service.
|
$ 35.35
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5050 thrust washer is a precision spacer washer used at the rear end rotating weight and fuel lift pump assembly on BUKH DV36 and DV48 marine diesel engines. It helps control end float and supports smooth, stable rotation, protecting adjacent components by maintaining correct axial positioning under load.
|
$ 127.78
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5068 mounting bracket secures the tension device in the injection pump and oil cooler area on BUKH DV36 and DV48 marine diesel engines. Designed as a direct-fit support component, it helps keep the tensioning hardware correctly positioned to maintain stable accessory drive alignment in demanding marine operation.
|
$ 306.15
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5092 starter motor mounting bracket secures the starting motor in the injection pump and oil cooler area on BUKH DV36 and DV48 marine diesel engines. Built for correct alignment and stable mounting, it supports reliable engine starting by keeping the starter firmly positioned under vibration and load.
|
$ 448.37
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5099 chain case sealing gasket is designed to close and protect the chain case on BUKH DV36 and DV48 marine diesel engines. Used in rear-end rotating weight and fuel lift pump assemblies as well as hand-start configurations, it helps maintain a tight joint to support clean, reliable operation and reduce the risk of leaks at the chain case interface.
|
$ 16.09
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5100 hand-start sprocket is a chain wheel designed for the manual starting system on BUKH DV36 and DV48 marine diesel engines. Built for proper engagement in the hand-start mechanism, it helps deliver smooth, reliable transfer of motion during starting and supports dependable onboard service where manual start capability is required.
|
$ 1,013.30
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5160 relief-valve closing screw is a dedicated fastening and sealing component used on the injection pump and oil cooler assemblies for BUKH DV36 and DV48 marine diesel engines. It secures the relief valve closing point to help maintain controlled oil flow and stable system operation under marine running conditions.
|
$ 49.01
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5174 angle bracket is a mounting support for the multiple plug used on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Installed within the electrical system and, on certain variants, at the rear end rotating weight and fuel lift pump area, it secures the plug connection to reduce movement and help protect wiring from vibration-related strain.
|
$ 61.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5234 cooling water pipe sealing gasket is designed for the injection pump and oil cooler area on BUKH DV36 and DV48 marine diesel engines. It helps maintain a tight seal in the cooling-water circuit, supporting stable coolant flow and reducing the risk of leaks in this critical engine-side plumbing connection.
|
$ 24.09
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5235 thermostat sealing ring is a rubber ring designed to seal the thermostat on BUKH DV36 marine diesel engines. It helps maintain a tight, leak-resistant joint in the cooling system so the thermostat can regulate coolant flow consistently and keep engine operating temperature stable.
|
$ 53.96
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5251 mounting bracket supports the engine control hardware on BUKH DV36 and DV48 marine diesel engines. Positioned in the rear-end rotating weight and fuel lift pump area, it secures the control arrangement to help maintain stable operation and reliable linkage support in the engine’s control assembly.
|
$ 147.05
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5254 large gearbox washer is a precision spacer and load-spreading element used in the gear assembly to help maintain correct stack height and secure clamped joints. Installed in the gearbox hardware, it supports reliable fastening, protects mating surfaces, and contributes to stable alignment under marine drivetrain loads.
|
$ 14.47
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5258 washer is a small gearbox washer designed to support correct spacing and secure assembly in the gearbox stack. Used in the marine transmission area, it helps maintain reliable alignment and consistent clamping, making it a practical OEM replacement part for service and repairs.
|
$ 18.48
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5282 circulation pump housing is a pump casing designed for the circulation pump on BUKH DV36 and DV48 marine diesel engines. It forms the main structural body of the pump assembly, supporting secure mounting and stable coolant flow through the engine’s cooling circuit for dependable temperature control underway.
|
$ 1,173.98
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.