BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 611Z0270 complete cold start pilot system with attachments supports reliable starting performance on BUKH RME marine diesel engines. Supplied as a complete cold-start system, it helps provide the correct start-assist function for dependable ignition and smoother cold-weather start-up behavior.
|
$ 1,765.68
-
+
| ||
|
1-2 weeks delivery time The Bukh 612A1650 12V starter motor (1.2 kW) provides dependable electric cranking performance for BUKH DV-series marine diesel engines, supporting fast, confident starts in demanding onboard conditions. Used in the electric start system and on configurations with injection pump and oil cooler assemblies, this unit is referenced as #11131285500 for straightforward service matching.
|
$ 1,153.81
-
+
| ||
|
1-2 weeks delivery time The Bukh 612H0570 charging alternator with a double charging diode supports stable battery charging and reliable electrical power generation across BUKH DV and EPA marine engines. Built for electric-start installations and charging duty, it helps maintain dependable starting performance and consistent onboard electrical supply, including 14 V charging applications on DV36 and DV48 setups.
|
$ 1,616.13
-
+
| ||
|
1-2 weeks delivery time The Bukh 612M0010 spring starter unit provides a dependable manual starting solution for BUKH EPA28 marine diesel engines. Installed on the flywheel housing, it stores mechanical energy in a spring mechanism to crank the engine for reliable start-up support in marine service.
|
$ 7,255.62
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A1239 rear radial sealing ring for BW7 helps keep the rear sealing point tight and protected by retaining lubricant and blocking water and contamination ingress. Sized 33x45x7 and cross-referenced as 27086, it is a practical replacement seal for maintaining clean, leak-free operation in the BW7 assembly.
|
$ 98.84
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A2111 shaft sealing ring set is a two-piece sealing solution for the propeller shaft on BUKH DV8L and DV10L saildrive installations, including DV8LSME and DV10LSME variants. Designed to renew the shaft seal at the saildrive, it helps keep water out and supports clean, reliable operation of the propulsion system.
|
$ 150.24
-
+
| ||
|
1-2 weeks delivery time The Bukh 620B0314 dipstick bonded seal ring is a sealing washer for the dipstick connection in the PRM 150 reversing gear gearcase assembly on BUKH EPA48 installations. With a 1/2 in BSP thread size, it helps keep the gearcase sealed to reduce oil seepage and maintain clean, reliable operation in marine service.
|
$ 3.52
-
+
| ||
|
1-2 weeks delivery time The Bukh 620B0315 dipstick is a PRM 150 reversing gear oil-level check component used on BUKH EPA48 installations with the 2.82:1 gearcase assembly. It supports quick, accurate fluid level inspection, helping protect the reversing gear from lubrication-related wear and maintaining dependable shifting in marine service.
|
$ 464.25
-
+
| ||
|
1-2 weeks delivery time The Bukh main bearing bushing is intended for DV8 and DV10L marine diesel engine rebuild applications.
|
$ 775.02
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0512 sealing element is designed for BUKH DV10LME marine diesel engines, helping keep mating surfaces tight to prevent fluid leakage and maintain proper system integrity during operation. It is a practical replacement choice when servicing the engine to restore a secure, dependable seal.
|
$ 64.17
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0519 radial sealing ring is a precision seal for BUKH DV10LME marine diesel engines, designed to help keep fluids contained and protect rotating shaft interfaces. Used as a dependable replacement seal, it supports clean operation by reducing leakage risk in the relevant engine sealing point.
|
$ 98.17
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0553 socket is a precision-fit component for BUKH DV10LME marine diesel engines, used as a locating and support element within its mating assembly. It helps maintain correct alignment between adjoining parts, promoting smooth operation and dependable service life in marine engine applications.
|
$ 181
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0554 connecting rod fastener is built to secure the connecting rod joint in BUKH DV10LME marine diesel engines. This bolt helps maintain correct clamping of the rod cap under continuous cyclic loads, supporting dependable crankshaft-to-piston power transfer and stable bottom-end operation.
|
$ 61.72
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0555 standard connecting rod bearing is a precision engine bearing for the connecting rod big-end on BUKH DV8, DV10L, and DV18 marine diesel engines. Designed to support smooth crankshaft rotation under load, it helps maintain proper oil film control and dependable bottom-end operation during continuous marine duty.
|
$ 248.15
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0563 A-type valve guide is a precision engine component for the valve train on BUKH DV8 and BUKH DV10L marine diesel engines. It supports accurate valve stem alignment in the cylinder head, helping maintain smooth valve movement and consistent sealing for dependable combustion performance.
|
$ 234.30
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0572 valve spring is a precision valvetrain component for BUKH DV10LME marine diesel engines, designed to maintain proper valve control during operation. Installed in the cylinder head valve gear, it supports consistent valve closing force to promote stable combustion, dependable starting, and smooth running under marine load.
|
$ 52.25
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0590 valve cover is a DV10LSME engine top-end cover that helps protect the valve train area from water ingress and debris while supporting a clean, controlled seal over the cylinder head. Built as a direct-fit replacement for BUKH DV10LSME marine diesel installations, it restores proper enclosure of the rocker area for reliable operation onboard.
|
$ 123.37
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0591 valve cover sealing gasket is designed for the valve cover on BUKH DV10LSME marine diesel engines, helping maintain a tight seal between the cover and cylinder head. It supports clean, controlled operation by reducing the risk of oil seepage from the top end of the engine during normal running and vibration.
|
$ 24.09
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0599 nozzle sealing element is designed for the injector nozzle on BUKH DV10L marine diesel engines. Installed in the fuel injection area, it helps maintain a tight seal at the nozzle interface to support clean, reliable fuel delivery and stable engine operation.
|
$ 18.66
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0611 electric pump seal (0.3 mm) is a precision sealing element for the electric pump on BUKH DV10LSME marine diesel engines. It helps maintain a tight seal within the pump assembly to reduce the risk of leakage and support dependable cooling or fluid circulation performance onboard.
|
$ 6.86
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.