BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 620L0618 fuel filter cartridge set is designed to keep the fuel system on BUKH DV10LSME marine diesel engines clean and protected. By capturing contaminants before they reach sensitive components, these replacement cartridges support smooth operation, dependable starting, and long service life in marine conditions.
|
$ 123.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0668 oil filter element helps keep engine oil clean in the lubrication system of BUKH DV10LME and DV8 marine diesel engines. By trapping contaminants carried in the oil, it supports stable oil flow, reduces internal wear, and protects key engine components during continuous marine operation.
|
$ 103.66
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0671 E-line is a dedicated line element for BUKH DV10LME marine diesel engines, intended to restore correct routing and secure connection within the engine’s E-line arrangement. It supports a tidy, dependable installation and is suited for service replacement where an OEM-fit line is required.
|
$ 222.92
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0683 main bearing 0.25 is a precision engine bearing shell for the crankshaft main journals in BUKH DV10LME marine diesel engines. Designed to support stable crankshaft alignment under load, it helps maintain smooth rotation, consistent oil film control, and reliable bottom-end durability in continuous marine operation.
|
$ 466.60
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0726 push rod (226 mm length) is a precision valve-train component used to transmit cam follower motion to the rocker gear for accurate valve operation. Built for marine engine service, it supports stable valve timing and smooth running when replacing worn or bent push rods during top-end maintenance.
|
$ 188.81
-
+
| ||
|
1-2 weeks delivery time The Bukh 71041-05101 spring lock washer is a securing fastener element for the ECU and case on BUKH S270J marine engines. Designed to maintain bolt preload under vibration, it helps keep the electronic control unit and its housing firmly fastened for dependable operation in marine service.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 80P12-S95SC nipple is a coolant-line connection component for BUKH S270J marine diesel engines, used within the coolant pipe and hose assembly. It helps create a secure junction between cooling-system hoses and piping, supporting reliable coolant circulation and minimizing the risk of leaks in the engine’s cooling circuit.
|
$ 15.58
-
+
| ||
|
1-2 weeks delivery time The Bukh 80P14-S11SC coolant nipple is a compact connection fitting used on the turbocharger coolant circuit of BUKH S270J marine diesel engines. It provides a secure interface for routing coolant through the turbocharger area, supporting stable temperature control and dependable operation in marine service.
|
$ 11.72
-
+
| ||
|
1-2 weeks delivery time The Bukh 8E+68 starting clutch is a key engagement component in the engine starting system, designed to transmit starter drive torque during cranking and disengage once the engine fires. Built for dependable operation in marine service, it supports consistent starts and helps protect the starter drive from unnecessary load after ignition.
|
$ 1,020.88
-
+
| ||
|
1-2 weeks delivery time The Bukh 90E07-01454 ear clamp is a compact securing fastener used on BUKH R210J and S270J marine diesel engines in the oil pan and fuel system assemblies, including the fuel filter installation. It provides a firm, vibration-resistant hold on connected lines to help maintain clean, leak-free routing in demanding marine engine-room conditions.
|
$ 2.81
-
+
| ||
|
1-2 weeks delivery time The Bukh 90E09-05004 ear clamp is a secure hose clamping solution used on the BUKH R210J sea water pump and oil cooler assemblies. It provides consistent, even clamping force to help keep marine fluid lines tight and leak-resistant in vibration-prone engine-room conditions.
|
$ 5.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 90E09-05754 ear clamp is a secure hose clamp for sea water hose connections on BUKH S270J engines. Used across the sea water pump, intercooler, heat exchanger, and oil cooler assemblies, it helps maintain tight, leak-resistant joints in the raw-water cooling circuit for dependable cooling system operation.
|
$ 6.03
-
+
| ||
|
1-2 weeks delivery time The Bukh 90W12-04004 securing clamp is a cooling-system fastener used on BUKH R210J and S270J marine diesel engines. Installed on the coolant pipe and hose assemblies and on the heat exchanger assembly, it helps hold hoses and piping firmly in place to support leak-resistant coolant circulation in marine operating conditions.
|
$ 10.65
-
+
| ||
|
1-2 weeks delivery time The Bukh 90W12-05004 clamp is a secure, OEM-style fastening component used across key cooling-system connections on BUKH R210J and S270J marine diesel engines. Installed on the R210J intercooler and coolant pipe and hose runs, and also within the S270J heat exchanger assembly, it helps keep hoses and pipes firmly retained to support leak-resistant, vibration-tolerant operation at sea.
|
$ 11.08
-
+
| ||
|
1-2 weeks delivery time The Bukh 90W12-06004 clamp is a secure fastening component used across multiple BUKH R210J and S270J engine assemblies, including the air filter, intake manifold, sea water pump, and heat exchanger. It helps maintain tight, vibration-resistant connections to reduce the risk of leaks, air ingress, and hose or duct movement in demanding marine operation.
|
$ 11.62
-
+
| ||
|
1-2 weeks delivery time The Bukh 90W12-07004 clamp is a secure fastening component used on BUKH R210J air filter installations and BUKH S270J intercooler connections. It helps keep hoses or ducting firmly seated to reduce air leaks and vibration-related loosening, supporting stable airflow through the intake and charge-air cooling systems in marine service.
|
$ 12.56
-
+
| ||
|
1-2 weeks delivery time The Bukh 90W12-08004 clamp is a securing fastener used on the air filter installation for BUKH R210J and S270J engines and also on the S270J intercooler assembly. It provides a firm hold on connected components to help maintain a sealed, stable air-intake and charge-air setup in marine operating conditions.
|
$ 13.76
-
+
| ||
|
1-2 weeks delivery time The Bukh 90W12-11004 bellows clamp is a secure fastening component used on the exhaust elbow and pipe connection for BUKH R210J and S270J marine engines. It provides firm, vibration-resistant clamping to help keep the exhaust joint tight, supporting a dependable exhaust run and reducing the risk of leaks at the bellows connection.
|
$ 14.61
-
+
| ||
|
1-2 weeks delivery time The Bukh 91931-2F250 wiring mounting bracket secures and organizes engine wiring on the rocker cover of BUKH R210J marine diesel engines. Designed for a clean, stable installation, it helps protect wiring from vibration and movement in the rocker cover area for dependable operation in marine service.
|
$ 4.28
-
+
| ||
|
1-2 weeks delivery time The Bukh 94750-37100 oil pressure switch assembly monitors engine oil pressure on BUKH S270J marine diesel engines within the engine oil pump system. It supports dependable pressure indication and protection functions, helping operators catch low-oil-pressure conditions early to safeguard critical internal engine components.
|
$ 42.78
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.