BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 600-09301 recharge hydraulic pump supports the HS Start system on BUKH EPA28 and EPA36 marine engines, supplying recharge pressure where the pump is installed at the flywheel housing. Rated for 150 bar, this hydraulic pump helps ensure responsive starting support and stable hydraulic performance in the HS Start circuit.
|
$ 2,267.19
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-62620 1 1/2 in BSP exhaust gasket is a sealing element for the header tank exhaust connection on BUKH EPA28, EPA36, and EPA48 marine engines. It helps maintain a tight, reliable joint to reduce exhaust leakage, supporting safe operation and dependable performance in the marine exhaust system.
|
$ 49.78
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-62670 oil pressure switch is a monitoring component used on the header tank installation for BUKH EPA28, EPA36, and EPA48 marine engines. It supports reliable oil-pressure signaling to help protect the engine by enabling timely indication of low oil pressure during operation.
|
$ 163.65
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-67830 fuel lift pump supports steady low-pressure fuel supply in the fuel connections system on BUKH EPA28 and EPA36 marine diesel engines. Designed to move fuel from the tank toward the engine’s fuel system for reliable feed and priming, this OEM-grade replacement helps maintain consistent engine operation under changing load and sea conditions.
|
$ 1,252.85
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-72880 S3 exhaust manifold gasket provides a dependable seal for the exhaust manifold connection on BUKH EPA48 marine diesel engines. Used within the header tank assembly reference, it helps prevent exhaust gas leakage at the joint, supporting clean operation and protecting surrounding components from heat and soot blow-by.
|
$ 126.87
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-80290 fuel filter head and bleed screw supports clean, air-free fuel delivery on BUKH EPA28, EPA36, and EPA48 marine engines. Installed in the fuel connections assembly, it provides a secure mounting point for the fuel filter and enables controlled bleeding to help purge trapped air for smoother starting and stable running.
|
$ 670.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-80300 exhaust manifold sealing gasket is designed for the exhaust manifold exhaust joint on BUKH EPA28 marine engines and is referenced for the header tank assembly. It helps maintain a tight, reliable seal at the exhaust manifold interface to reduce exhaust leakage and support clean, dependable operation in marine service.
|
$ 148.53
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-80330 exhaust sealing gasket is designed to secure a tight, leak-resistant joint in the exhaust-side installation associated with the header tank assembly on BUKH EPA36, S5, and 4CLY marine engines. Replacing this gasket helps maintain correct exhaust flow and protects surrounding components by keeping the connection properly sealed under marine operating conditions.
|
$ 211.98
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-80490 thermostat gasket provides a secure seal in the thermostat area of the header tank assembly on BUKH EPA48 marine engines. Designed as an OEM-fit sealing element, it helps prevent coolant leaks and supports stable temperature control by keeping the thermostat housing properly sealed during operation.
|
$ 32.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-80870 fuel lift pump supplies consistent low-pressure fuel flow for BUKH EPA48 marine diesel engines. Installed in the fuel supply circuit at the fuel connections, it helps ensure reliable fuel delivery to the engine’s fuel system for smooth starting and stable operation underway.
|
$ 1,324.27
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-91801 threaded fuel pipe clamp is a securing hardware component for the fuel connections on BUKH EPA28, EPA36, and EPA48 marine diesel engines. It supports safe, stable routing of the fuel pipe by clamping it in position and helping reduce movement from vibration, keeping the fuel-line installation tidy and dependable.
|
$ 34.59
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-91802 fuel line clamp is a no-thread securing clamp used in the fuel connections assembly on BUKH EPA28, EPA36, and EPA48 marine diesel engines. Designed to hold pipe 2 firmly in place, it supports clean routing and stable fuel line retention to help reduce movement and vibration in the fuel system.
|
$ 27.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-91803 fuel clamp screw and washer set secures fuel line clamp points in the fuel connections assembly on BUKH EPA28, EPA36, and EPA48 marine engines. Designed to hold fuel pipework firmly in place, it helps maintain tidy routing and dependable retention in vibration-prone engine-room conditions.
|
$ 6.92
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-96300 long dipstick is a Super5 header tank level-check component for BUKH EPA28 and EPA36 marine diesel engines. Designed to fit the header tank assembly, it enables quick, accurate fluid level verification during routine engine-room inspections, helping maintain stable cooling-system operation underway.
|
$ 208.85
-
+
| ||
|
1-2 weeks delivery time The Bukh 600-96310 extended dipstick guide hose is a long dipstick routing component used with the header tank arrangement on BUKH EPA28 and EPA36 marine diesel engines. It guides and protects the dipstick path for smoother oil-level checks, helping keep service access practical in tight engine-room installations while maintaining an OEM-correct fit.
|
$ 746.79
-
+
| ||
|
1-2 weeks delivery time The Bukh 610A1000 injection pump is a precision fuel-metering component for BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed within the fuel system group covering the fuel filter, fuel injection pump, fuel lift pump, and fuel piping, it delivers accurately timed, high-pressure fuel supply to support clean combustion, dependable starting, and stable engine performance.
|
$ 1,912.32
-
+
| ||
|
1-2 weeks delivery time The Bukh 610A1007 sealing washer is a precision sealing element sized 9.6 x 13 x 0.5 mm, designed to help prevent leaks where a secure, tight joint is required in BUKH marine engine and equipment assemblies. It cross-references to part number 620A0604, making it a practical choice for service replacements where maintaining fluid-tight connections is essential.
|
$ 9.48
-
+
| ||
|
1-2 weeks delivery time The Bukh 610A3000 fuel injection pump unit is built for precise diesel fuel delivery on BUKH DV36 marine engines, supporting smooth starting and stable running under load. Installed within the injection pump and oil cooler assembly area, it supplies the high-pressure fuel flow needed for consistent combustion and dependable propulsion performance.
|
$ 5,934.34
-
+
| ||
|
1-2 weeks delivery time The Bukh 610A3089 12V single-pole stop solenoid provides dependable engine shut-down control on BUKH DV36 and DV48 marine diesels. Fitted within the injection pump and oil cooler assembly, this stop magnet actuates the stop function when energized, supporting safe, responsive stopping and reliable operation in marine service.
|
$ 917.45
-
+
| ||
|
1-2 weeks delivery time The Bukh 610A3091 hollow banjo bolt is a return-line fastener used on the injection pump and oil cooler installations for BUKH DV36 and DV48 marine diesel engines. Designed to secure a banjo fitting while allowing internal fluid flow through the bolt, it helps keep the fuel and oil line connections tight, correctly routed, and reliable in marine service.
|
$ 68.74
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.