BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 610A3300 electric pump is a dedicated E-pump used within the fuel injection pump system on BUKH DV36 and DV48 marine diesel engines. Designed for OEM-style fit and dependable operation, it supports stable fuel delivery within the injection pump assembly areas, including installations associated with the oil cooler and the air inlet and turbocharger groups on DV48 setups.
|
$ 5,934.34
-
+
| ||
|
1-2 weeks delivery time The Bukh 610B9052 injector nozzle insert is a precision fuel-system component for BUKH DV10ME and BUKH DV20 marine diesel engines. Installed as part of the injector, it helps deliver correct fuel atomization for clean, stable combustion, supporting smooth running and dependable engine response under varying marine loads.
|
$ 438.50
-
+
| ||
|
1-2 weeks delivery time The Bukh 610B9220 complete injector nozzle is a ready-to-install fuel injection component for BUKH DV24RME and DV29RME engines, fitted in the cylinder head and valve area. It supports clean, consistent fuel delivery at the injector tip for dependable combustion, and it is intended to be used with the updated sealing washer Bukh 522C3080 in line with Technical Notice Bukh SI1002.
|
$ 441.05
-
+
| ||
|
1-2 weeks delivery time The Bukh 610B9250 complete nozzle assembly is a ready-to-install nozzle unit used across key systems on BUKH DV32, DV36, and DV48 marine diesel engines. Specified for cylinder head and valve-related installation on DV32, fuel injection and valve assemblies on DV36 and DV48, and also the DV48 air inlet and turbocharger group, it supports clean, dependable engine operation with an OEM-correct fit.
|
$ 470.46
-
+
| ||
|
1-2 weeks delivery time The Bukh 610C0120 fuel lift pump is a fuel feed pump unit designed to supply steady low-pressure fuel flow from the tank to the fuel filtration and injection system on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Used within the fuel system assemblies, it supports dependable starting and consistent engine operation by keeping fuel delivery stable under varying load and sea conditions.
|
$ 280.37
-
+
| ||
|
1-2 weeks delivery time The Bukh 610D0053 fuel filter element is a replacement insert for the fuel filtration system on BUKH DV10 and DV20 marine diesel engines. It helps keep fuel supply clean to support stable combustion and protect precision fuel-system components; this insert is supplied without a seal, and the matching seal must be ordered separately as 530P1020.
|
$ 49.01
-
+
| ||
|
1-2 weeks delivery time The Bukh 610D0201 fuel filter cartridge is a replacement filter element used in the fuel system on BUKH DV-series engines, supporting clean fuel delivery to the injection equipment for steady, reliable running. It fits DV10ME engines from engine number 207292 and DV20ME engines from engine number 104271, and is also used across DV18ME, DV24, DV29, DV32, DV36, DV48, DV24RME, and DV29RME applications in fuel filter and fuel injection system assemblies.
|
$ 46.53
-
+
| ||
|
1-2 weeks delivery time The Bukh 610E0502 rubber cap is a protective sealing component for the heat exchanger, helping keep the cooling circuit properly covered and safeguarded in marine engine installations. Designed as an OEM-style replacement, it supports a secure closure to reduce exposure to spray, dirt, and vibration-related loosening around the heat exchanger assembly.
|
$ 188.81
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0076 water pump comb is a 6-hole comb component for the DV10 water pump assembly on BUKH DV10 marine diesel engines. Designed for OEM-style fit, it supports correct internal arrangement within the pump to help maintain dependable cooling-water circulation in marine operation.
|
$ 145.44
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0100 4-hole water pump with a plain bearing is a dependable replacement pump for marine engine cooling-water circulation. Designed in a 4-bolt mounting format, it supports steady water flow through the cooling circuit to help maintain stable operating temperatures in BUKH installations that use this pump design.
|
$ 676.44
-
+
| ||
|
1-2 weeks delivery time The Bukh pump cover gasket is intended for marine engine pump sealing applications.
|
$ 13.50
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0251 comb element (3.1 mm) is designed for use with a two-circuit disc on BUKH DV36 and DV48 marine diesel engines. Used within the disc assembly, it supports accurate setup and consistent operation, making it a practical OEM-grade replacement part for servicing and maintaining drivetrain-related components.
|
$ 119.02
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0502 lid is a replacement cover component designed to close and protect a Bukh marine assembly. By providing a secure barrier over the opening it serves, it helps keep internal parts shielded from splash, dirt, and general engine-room contaminants for dependable day-to-day operation.
|
$ 85.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0503 water pump cover sealing element is designed for the water pump on BUKH DV36 marine diesel engines, helping maintain a tight, leak-resistant joint at the pump cover. It supports stable cooling-water circulation by keeping the pump housing properly sealed during operation and service intervals.
|
$ 6.44
-
+
| ||
|
1-2 weeks delivery time The Bukh 610G0510 shaft seal is a dedicated sealing component for Bukh shaft applications, designed to help keep fluids contained where a rotating shaft passes through a housing. Installed as part of a shaft sealing point, it supports clean operation by reducing the risk of leakage and protecting surrounding components during marine service.
|
$ 292.49
-
+
| ||
|
1-2 weeks delivery time The Bukh 610J0050 lubricating oil filter element helps keep the engine oil system clean on BUKH DV-series marine diesel engines, supporting dependable lubrication where the camshaft and lubricating oil pump rely on steady oil flow. Designed for DV10, DV18, DV20, DV24, DV29, DV29RME, and DV32 applications, it captures contaminants in the lubricating circuit to protect critical internal components during continuous marine operation.
|
$ 27.23
-
+
| ||
|
1-2 weeks delivery time The Bukh 610J0200 oil filter element supports clean, stable lubrication for BUKH DV36 and DV48 marine diesel engines. Used in the injection pump and oil cooler assembly, it helps trap contaminants from the oil circuit to protect precision components, promote dependable oil flow, and support consistent engine performance underway.
|
$ 41.99
-
+
| ||
|
1-2 weeks delivery time The Bukh 611L0101 intermediate flange gasket is a sealing element used in the air inlet and turbocharger assembly on BUKH DV32 and BUKH DV48 marine diesel engines. Designed to seal the intermediate flange joint, it helps maintain a tight connection to support stable turbocharger system operation and reduce the risk of leakage at the flange interface.
|
$ 27.44
-
+
| ||
|
1-2 weeks delivery time The Bukh 611L0102 turbocharger intake gasket provides a secure seal in the air inlet and turbocharger assembly on BUKH DV32 and DV48 marine diesel engines. Designed to help maintain correct airflow and boost integrity, it supports clean, stable engine operation by reducing the risk of air leaks at the turbocharger intake connection.
|
$ 14.56
-
+
| ||
|
1-2 weeks delivery time The Bukh 611L0150 turbocharger unit is a new replacement component for BUKH DV32 and DV48 marine diesel engines from 2020 onward, installed within the air inlet and turbocharger assembly. It compresses intake air to support strong combustion, helping the engine deliver responsive power and efficient operation under load.
|
$ 3,333.36
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.