BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 217-99330 M10 x 40 x 1.25 set screw is a flywheel housing fastener for BUKH EPA28, EPA36, and EPA48 marine engines. Built to secure critical housing joints, it helps maintain correct alignment and dependable retention under vibration and load in marine service.
|
$ 5.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 218-06247 thick-wall copper pipe (6 mm) is a rigid line component used on the flywheel housing for BUKH EPA28 engines. Built for clean routing and secure connections in tight engine-room spaces, it supports dependable fluid or signal line installation as part of the flywheel housing assembly.
|
$ 30.68
-
+
| ||
|
1-2 weeks delivery time The Bukh 218-99251 thin-wall black radiator hose is a 1 1/8 in (28 mm) cooling hose used at the header tank on BUKH EPA28 and EPA36 marine engines. It provides a secure, correctly sized connection within the cooling system, helping maintain steady coolant flow between the header tank and the rest of the engine’s cooling circuit.
|
$ 93.42
-
+
| ||
|
1-2 weeks delivery time The Bukh 218-99262 silicone hose with a 28 mm inner diameter is designed for the header tank installation on BUKH EPA48 engines. Built to suit the S3 header tank arrangement, it supports secure coolant hose routing and dependable circulation within the engine cooling system.
|
$ 351.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 22112-3A000 intake valve seat is a precision engine component for the cylinder head on BUKH S270J marine diesel engines. Installed at the intake valve port, it provides a durable sealing surface that supports stable compression, efficient air charging, and consistent combustion performance over long running hours.
|
$ 16.24
-
+
| ||
|
1-2 weeks delivery time The Bukh 22113-3A500 exhaust valve seat is a cylinder-head component for BUKH S270J marine diesel engines, used at the exhaust valve seat position. It provides a stable, precisely located sealing surface for the exhaust valve, supporting consistent compression and dependable exhaust gas sealing in the cylinder head assembly.
|
$ 21.39
-
+
| ||
|
1-2 weeks delivery time The Bukh 22114-27000 valve guide is a precision cylinder head component for BUKH S270J engines. Installed in the cylinder head, it supports accurate valve stem alignment and smooth valve movement, helping maintain stable valve train operation and consistent sealing during combustion.
|
$ 30.83
-
+
| ||
|
1-2 weeks delivery time The Bukh 22124-26000 knock bush is a cylinder head bushing used on BUKH R210J marine diesel engines. Installed in the cylinder head assembly, it supports accurate location and stable seating of associated components, helping maintain correct alignment and dependable operation in the top-end of the engine.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 22127-3A000 camshaft cap bolt is a cylinder head fastener used on BUKH S270J marine diesel engines to secure the camshaft cap in place. Correct clamping of the camshaft cap supports stable valve-train alignment, helping the camshaft run smoothly and reliably under continuous marine load.
|
$ 3.45
-
+
| ||
|
1-2 weeks delivery time The Bukh 22128-3A000 cam cap bolt is a cylinder head fastener used on BUKH S270J marine diesel engines. Installed in the cylinder head cam cap locations, it secures the camshaft cap to maintain precise valvetrain alignment and stable operation under marine duty cycles.
|
$ 2.58
-
+
| ||
|
1-2 weeks delivery time The Bukh 22129-3A000 cam cap bolt is a cylinder head fastener used on BUKH S270J marine diesel engines. Installed in the cylinder head assembly, it secures the camshaft cap to help maintain stable valve-train alignment and dependable operation under marine duty cycles.
|
$ 2.58
-
+
| ||
|
1-2 weeks delivery time The Bukh 22132-3A000 circular packing is a sealing element used on the cylinder head assembly of BUKH S270J marine diesel engines. Installed in the cylinder head area, it helps maintain a tight seal where required, supporting stable engine operation by preventing unwanted leakage paths in this critical top-end section.
|
$ 17.94
-
+
| ||
|
1-2 weeks delivery time The Bukh 22133-2F000 cylinder head gasket seals the cylinder head joint on BUKH R210J marine diesel engines to maintain proper compression and keep coolant and combustion gases separated. Designed for the cylinder head assembly, it supports reliable starting, stable running, and long-term protection against leaks in demanding marine service.
|
$ 9.70
-
+
| ||
|
1-2 weeks delivery time The Bukh 22133-3A000 ladder gasket is a sealing element for the BUKH S270J cylinder head assembly. Installed in the cylinder head at the specified ladder-gasket locations, it helps maintain a tight seal between mating surfaces to support stable engine operation and reduce the risk of leaks in the cylinder head area.
|
$ 12.79
-
+
| ||
|
1-2 weeks delivery time The Bukh 22141-3A000 injector locator bracket is a cylinder head mounting component for BUKH S270J marine diesel engines, designed to position and secure the injector correctly in the cylinder head assembly. By keeping the injector aligned and stable, it supports consistent injector seating and dependable operation in demanding marine service.
|
$ 6.03
-
+
| ||
|
1-2 weeks delivery time The Bukh 22161-2A000 cylinder head stud is a critical fastening element for the cylinder head assembly on BUKH S270J marine diesel engines. It helps secure the cylinder head to maintain clamping force and sealing integrity under combustion loads, supporting dependable engine operation in marine service.
|
$ 3.11
-
+
| ||
|
1-2 weeks delivery time The Bukh 22211-2F000 intake valve is a cylinder head valve-train component for BUKH R210J marine diesel engines. Installed in the cylinder head, it controls the intake airflow into the combustion chamber, supporting clean breathing, consistent combustion, and dependable engine performance under marine operating loads.
|
$ 40.82
-
+
| ||
|
1-2 weeks delivery time The Bukh 22211-3A000 intake valve is a precision engine valvetrain component for the BUKH S270J cylinder head. It controls incoming air charge into the combustion chamber, supporting efficient breathing and stable combustion timing while maintaining correct sealing in the cylinder head assembly.
|
$ 54.80
-
+
| ||
|
1-2 weeks delivery time The Bukh 22212-2F100 exhaust valve is a precision valvetrain component for the cylinder head on BUKH R210J marine diesel engines. It controls the release of exhaust gases from the combustion chamber, helping the engine breathe correctly, maintain efficient combustion cycles, and support dependable power delivery under marine load.
|
$ 75.07
-
+
| ||
|
1-2 weeks delivery time The Bukh 22212-3A000 exhaust valve is a cylinder head valvetrain component for BUKH S270J marine diesel engines. Installed in the cylinder head, it controls the discharge of exhaust gases from the combustion chamber, helping maintain clean gas flow, stable combustion cycles, and dependable engine operation in marine service.
|
$ 65.01
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.