ID
1349633
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Flojet D2132F6011 Duplex II diaphragm pump is a 12V DC demand-duty unit with an 80 PSI pressure switch (shutoff set point). It features a polypropylene pump body, a Viton diaphragm, a Santoprene check valve, and a high-pressure cam. Ports are 3/8 inch NPT female on both inlet and discharge, it is self-priming up to 8 ft (2.4 m), can run dry without damage, and has a maximum fluid temperature of 140°F; pump weight is 5 lb.
- Description
- Ask a Question
-
Flojet Duplex II Demand Diaphragm Pump With 80 PSI Switch
The Flojet D2132F6011 is a Duplex II series diaphragm pump designed for demand operation, automatically stopping when the discharge valve is closed and restarting when flow is required. It is intended for intermittent duty cycles and is used for applications such as liquid transfer, spraying, cooling, circulation, filtration, and dispensing, including general agricultural use.
Technical Specifications
Pump Series Duplex II Type Diaphragm pump (demand duty) Motor Voltage 12V DC Pressure Switch Setting (Off Set Point) 80 PSI Body Material Polypropylene Diaphragm Material Viton Check Valve Material Santoprene Cam High pressure cam Inlet Port 3/8 inch NPT female Discharge Port 3/8 inch NPT female Self-Priming Up to 8 ft (2.4 m) Maximum Fluid Temperature 140�F Weight 5 lb Maximum Inlet Pressure 30 PSI (2.1 bar)
Features
- Demand operation: pressure switch stops the pump at 80 PSI when the discharge valve is closed and restarts when line pressure drops and a valve is opened
- Run-dry capability: can run dry without damage
- High dry vacuum capability: redesigned diaphragm and valve design
- Rotatable pump head: pump head can be rotated in 90-degree increments to simplify plumbing
Product Details
- Intermittent duty application; can be run continuously for short periods of time
- Do not use to pump flammable fluids (including gasoline, kerosene, fuel oil) and do not use in an explosive environment
- Mount in a dry, adequately ventilated area; if installed outdoors, shield from water, dust, sunlight, and washdown spray
- For priming, keep the discharge line open to vent trapped air and avoid airlock
- Inlet strainer recommendation: minimum 40 mesh strainer or filter on the inlet line
- Check valve guidance: if installed in the plumbing, cracking pressure should be no more than 2 PSI (0.14 bar)
Compatibility
- Available part: Catalog # 20914-002A, Check Valve Assembly Kit (Duplex II Series Pumps 115 VAC)
-
Popular products
