Yacht Devices YDTA-01 Tank Adapter

Yacht Devices YDTA-01 Tank Adapter

The Yacht Devices YDTA-01 Tank Adapter enables you to connect existing resistive or voltage type fluid level sensors installed on a tank to NMEA 2000 devices. This allows you to display fluid levels on chart plotters and instrumental displays seamlessly.

Comprehensive Fluid Type Support

The adapter can be configured to report one of the seven fluid types defined in the NMEA 2000 standard: Diesel Fuel, Gasoline Fuel, Oil, Fresh Water, Waste Water, Black Water (Sewage), or Live Well. It supports configuration for up to 16 tanks of the same type in an NMEA 2000 network.

Flexible Compatibility

The YDTA-01 is compatible with European (10 to 180 Ohm range), American (240 to 33 Ohm range), and Japanese (0 to 310 Ohm range) standard fluid level sensors, as well as any nonstandard sensors with a maximum resistance of less than 400 Ohm. It also supports fluid level sensors that output an analog voltage signal within the range of 0 to 16 Volts.

Installation and Integration

The adapter can be installed as a standalone measuring device, in parallel with an existing analog gauge (supports both 2-coil and 1-coil gauges), or in parallel with a Volvo Penta engine's MDI box. It works smoothly with combined gauges where values are chosen using a button.

Precision Calibration

The device allows for calibration with up to 12 calibration points to ensure accurate readings regardless of tank shape. It can also compensate for parasitic resistance of the sensor wires in its settings. A MicroSD card slot is provided for easy configuration, firmware updates, diagnostics, and data logging, using any device with a MicroSD card reader and a text editor.

Versatile Usage

The YDTA-01 can be converted to a pressure sensor adapter for use with Volvo Penta KAD/TAMD oil pressure sensors or other resistive or voltage pressure sensors. It can also integrate with other Yacht Devices products to control digital switching equipment, record liquid levels, and provide remote monitoring via Wi-Fi gateways.

Technical Specifications

• Compatible with European, American, and Japanese fluid level sensors
• Maximum resistance for nonstandard sensors: less than 400 Ohm
• Analog voltage signal range: 0 to 16 Volts
• Supports up to 12 calibration points
• MicroSD card slot for configuration and data logging
• Powered from the NMEA 2000 network
• High voltage galvanic isolation between NMEA 2000 and sensor inputs

Network Compatibility

The adapter is certified by the National Marine Electronics Association and is compatible with virtually all equipment supporting NMEA 2000. It is supplied with a connector compatible with SeaTalk NG or NMEA 2000 Micro Male. For other networks, an adaptor cable may be required.

For additional technical details, please see the User Guide and FAQ.