|
1-2 weeks delivery time Price incl. 19% VAT This pressure sender has a measuring range from 0 to 10 Bar, 0 to 145 PSI, and 0 to 1000 KPa with a maximum pressure of 30 Bar for 2 seconds. It operates with an operating voltage of 6-24 V DC and can handle oil, fuel, or air as the pressure medium. The pressure sender connector is a Bosch special push-on connector.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This pressure sender has a measuring range of 0 - 10 Bar and can withstand a maximum pressure of 30 Bar for 2 seconds. It is compatible with various pressure mediums and has electrical features such as an operating voltage of 6 - 24 V DC and a resistor range of 10 - 184 Ohm.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This pressure sender is ideal for measuring pressure in a variety of mediums, including oil, fuel, and air. With a maximum pressure of 30 Bar during 2 seconds, M12 thread, and a temperature range of -25 °C to +100 °C, this sender can handle tough conditions. The electrical features include an operating voltage of 6 - 24 V DC and a single-pole common ground pressure sensor signal. The warning contact is set at 5.00 Bar ± 0.30 Bar with a maximum switching capacity of 5 Watt.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 360-081-062-002A is a high-quality pressure sender with a maximum range of 80 PSI/5 Bar and a warning contact set at 6 PSI. Its M14x1.5 thread size and 6-24V voltage range make it easy to install and compatible with most systems. It also features a standard ground, warning contact, and an OHM range of 10-180 Ohm. Trust the VDO 360-081-062-002A for all your pressure monitoring needs.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 360-081-062-003C pressure sender has a measuring range of 0 - 10 Bar and can handle maximum pressure of 30 Bar for 2 seconds. It is suitable for use with oil, fuel, and air and has an operating voltage of 6 - 24 V DC. The warning contact is set at 5.50 Bar and has a maximum switching capacity of 5 Watt.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the VDO 360-081-062-004A Pressure Sender, designed for precise and reliable pressure measurements. With a pressure measuring range of 0 - 5 Bar, 0 - 72.5 PSI, and 0 - 500 KPa, this sender is perfect for monitoring pressure in a variety of applications. Built to withstand even the toughest conditions, it has a maximum pressure of 30 Bar for up to 2 seconds and is suitable for use with oil, fuel, and air.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 362-081-002-004C is a reliable pressure sender designed for precise measurement across a range of 0 to 28 Bar, suitable for oil, fuel, and air systems. With a robust 1/8-27 NPTF thread, it operates at temperatures between -25°C and +100°C and handles brief maximum pressures of up to 50 Bar. The device supports 6-24 V DC, has a resistor range of 5-90 Ohm, and features a dual-pole insulated return signal. Additionally, it includes an optional warning contact and is tailored for specialized applications, such as use with dual gauges on a Flybridge.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 362-081-003-001C is a pressure sender that measures pressures from 0 to 5 Bar (0 to 72.5 PSI, 0 to 500 KPa) and can handle up to 30 Bar for 2 seconds. It features a 1/8 - 27 NPTF thread, operates within -25°C to +100°C, and is suitable for oil, fuel, and air. It runs on 6 - 24 V DC with a resistor range of 5 - 90 Ohm, has a single-pole common ground signal, and is compatible with the VDO A2C59510886 Makepoint Switch for optional warning contact. The connector is an M4 AMP Male, angled at 50°.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 370-214-031-003G Cockpit International Quartz Clock features a 52 mm installation hole diameter and a 59.25 mm outside diameter, with a depth of 53 mm. It offers a locking height of 0.5 to 20 mm with a Spinlock nut and connects via an AMP Male blade connector. Operating within a 21.5 to 30 Volt DC range, it consumes less than 23 mA without illumination and includes reverse polarity protection. The clock measures time from 0 to 12 hours and uses a pushbutton for adjustment.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 395-024-004-008C Oil Level Warning Switch is a reliable component that alerts drivers when oil levels fall below a safe threshold, helping to prevent engine damage and maintain optimal performance.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 395-060-017-002C is a 24V DC liquid level switch with a lever type, suitable for use with water, coolant, or alcohol. It provides an analogue signal, operates without an adjustable sensor, and features an insulated return with contacts that open at the limit value.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 395-060-025-001C is a reliable level control switch for windscreen washer tanks, compatible with 12 to 24 volts. It provides precise fluid level monitoring, ensuring optimal performance of your vehicle's washer system.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 395-262-001-007C is a liquid level switch designed for diesel with a linear installation length of 196mm and a contact level at 170mm. It mounts with an M22 x 1.5 thread and operates within temperatures from -30 °C to +100 °C. The switch uses a 12 V DC power supply, has a warning contact with a maximum power of 2W, and provides a common ground output signal.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 395-262-001-015G is a liquid level switch for diesel with a 98mm installation length and a contact level of 73mm. It features M22 x 1.5 mounting, operates between -30°C and +100°C, and requires a 12V DC power supply. The switch includes a warning contact of up to 2W and provides a common ground output signal.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 395-262-001-023C is a liquid level switch for diesel with a 275 mm installation length and a contact level of 249 mm. It mounts with an M22 x 1.5 thread and operates in temperatures from -30 °C to +100 °C. Designed for 12 V DC systems, it includes a warning contact with a maximum of 2W and provides a common ground output signal.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 395-462-001-001G is a liquid level switch designed for gear oil and diesel, with an installation length of 184mm and a contact level at 158mm. It features an M22 x 1.5 mounting thread, operates within a temperature range of -30 °C to +100 °C, and works with a 24 V DC power supply. The switch includes a warning contact rated at a maximum of 3W and uses a common ground for its output signal.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 395-462-001-004G is a linear-type liquid level switch for diesel with an installation length of 145 mm and a contact level at 120 mm. It features a mounting size of M22 x 1.5 and operates within a temperature range of -30 °C to +100 °C. The device operates on 24 V DC with a maximum warning contact power of 3W and provides a common ground output signal.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 395-462-001-007C is a liquid level switch for gear oil and diesel, featuring an 85mm installation length with a ±1.5mm tolerance and a contact level at 60mm with a ±3.0mm tolerance. It uses an M22 x 1.5 mount and operates in temperatures from -30 °C to +100 °C. Powered by 24 V DC, it includes a warning contact with a maximum of 3W and a common ground output signal.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The VDO 397-015-001K is a precise 52mm temperature gauge for ambient air, suitable for both 12V and 24V systems. It measures temperatures from -25°C to +50°C and features a sleek black design, making it a versatile addition to various vehicle interiors and instrument panels.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the VDO 4-003-037 Countersunk Screw, M6 x 16 DIN 963 - a precision-engineered fastening solution for secure and flush fits in various applications.
|
Our managers will contact you and clarify the terms of the order
| ||
VDO Instruments And Parts
What types of VDO Instruments And Parts do you have in your catalog?
VDO Gauges, VDO Oil Pressure Gauges, VDO Fuel Gauges, VDO Boost Gauges, VDO Temperature Gauges, , VDO Tachometers, VDO Volt Gauges, VDO Gas Gauges, VDO Speedometers, VDO Oil Pressure Senders, VDO Fuel Sending Units, VDO TPMS Sensors