Osculati AISI 304 Stainless Steel Threaded Rods DIN 975, M5–M16, 1 m

Osculati AISI 304 Stainless Steel Threaded Rods DIN 975 - 1 Metre

Osculati threaded rods are manufactured from AISI 304 stainless steel and are listed according to DIN 975. Each rod measures 1 metre (1000 mm) in length and features a metric threaded shaft for use with compatible nuts and threaded fastening components.

Unlike conventional bolts and machine screws, threaded rods do not have an integral drive head. They are designed for applications where a length of threaded material is required to connect, secure or position components using nuts, washers and other compatible hardware.

The threaded profile allows nuts and fittings to be positioned along the rod according to the assembly requirements. The 1-metre length provides flexibility for installations requiring extended threaded connections or shorter sections cut from a full-length rod.

These rods can be used for suitable mechanical assemblies, equipment mounting, support brackets, fastening arrangements and general maintenance applications. The appropriate diameter, thread compatibility and required mechanical strength must be determined for each installation.

AISI 304 stainless steel provides corrosion resistance for general indoor, outdoor and suitable marine applications. For continuous saltwater exposure or environments with high chloride concentrations, the suitability of this stainless steel grade should be assessed.

The range includes seven nominal metric thread diameters from M5 to M16. All versions have a fixed length of 1000 mm, with each diameter identified by an individual Osculati part number.

Technical Specifications

Features and Applications

• Manufactured from AISI 304 stainless steel.
• DIN 975 threaded rod design.
• Fixed rod length of 1000 mm (1 metre).
• Metric threaded shaft for use with compatible nuts and threaded components.
• Headless construction allows fastening at different positions along the rod.
• Can be cut to shorter lengths where required, with appropriate thread-end finishing.
• Suitable for compatible equipment mounting, support brackets and mechanical fastening assemblies.
• Available in seven nominal thread sizes from M5 to M16.

Available Sizes and Part Numbers

Size Selection

Select the nominal metric thread diameter according to the nuts and threaded components used in the assembly. All variants have the same 1000 mm length, so only the thread diameter changes between available versions.

Verify compatibility with the mating thread and the mechanical requirements of the installation. Exact thread pitch, strength class and load ratings are not specified in the supplied catalogue information.