Yacht-supply24.com supplies a wide range of Jabsco products, including water pump systems, engine cooling pumps, searchlights, blowers, marine wc waste systems, toilets, impellers, and more. Whether you need reliable and efficient pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction, or top-quality marine equipment, Jabsco has got you covered.
Jabsco, a brand under Xylem, is a renowned manufacturer of products for the leisure marine market, with a rich history of over 80 years in servicing general industrial, marine, and sanitary markets. Shop our selection of Jabsco products and enjoy prompt delivery and competitive prices.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Jabsco 50447-0000 spare replacement component is intended as a genuine Jabsco spare part, helping support straightforward servicing when the correct part number is required. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 50830-0012 Cyclone high-flow 12V circulation pump delivers powerful, efficient water movement for high-flow circulation needs. Its reliable 12V operation supports consistent performance across marine and industrial applications, making it a strong choice when dependable high-flow circulation is required. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 50892-0000 joker valve component is built for dependable performance and long service life in demanding applications. Made with high-quality construction for durability, it is specified as compatible (among others) with pump series 50890 and is referenced as part number 16 in the exploded view, making it a practical replacement choice for maintaining reliable operation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 51200-9013 manual clutch pump unit delivers reliable, efficient pumping performance in a 1-1/2 inch size for versatile use. Its manual clutch mechanism helps you control flow and pressure with ease, making it well-suited to a variety of marine and industrial pump applications where dependable operation and durability matter. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 51270-9013 clutch pump is a high-quality, durable pump built for smooth operation and consistent functionality across various applications, making it a dependable choice for systems that require a clutch pump; the closest replacement is Jabsco 51270-2003 to support continued service and efficiency. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 51510-9001 flexible impeller pedestal pump end delivers dependable transfer performance with a bronze pump body, neoprene impeller, and a carbon/ceramic mechanical seal. Built as a bare shaft pedestal pump end only (without a motor), it features 3/8 inch NPT ports, sealed bearings for longer life, and self-priming capability from dry up to 1.5 m. With 2.3 GPM output and the ability to pump in either direction, it supports demanding duties such as engine cooling, washdown, circulation, bilge pumping, and general onboard or dockside liquid handling. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 52044-2000 Body Brz Ped 040 spare-part component is a high-quality, durable item built for precision and reliability. Its sleek design and advanced features support long-lasting performance, making it a solid choice when you need a dependable Jabsco replacement part for your project. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 52047-0000 pump shaft is a genuine replacement component designed for Jabsco 52040 engine cooling pumps, supporting efficient pump operation and overall engine cooling performance. Built with high-quality materials and precision engineering to Jabsco standards, it provides a seamless fit for dependable durability and reliability in demanding marine and industrial applications. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 52227-0000 pump shaft is a precision spare part engineered to fit the Jabsco 52220-0011 pump, providing a secure mechanical connection for reliable pump operation. A key-way drive and a splined impeller end help ensure positive engagement and dependable performance in your pump system. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 52514-1000 BSP tee kit is a durable plumbing component that creates a reliable connection point in British Standard Pipe systems for marine and industrial use. Built for harsh environments with corrosion-resistant construction, it supports dependable, leak-free plumbing connections while helping reduce downtime thanks to an installation-ready kit. It is specified as a BSP tee fitting for the accumulator tank used with Jabsco 52520 and 52530 series single- and double-stack systems. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 52600-0094 Par Max 7 pressure-controlled pumping unit delivers high-flow, self-priming performance to support multiple outlets with smooth, quiet operation. It provides up to 26.5 litres/minute (5.8 gallons/minute) open flow with a maximum pressure of 4.2 bar (60 psi), using a pressure switch that cuts in at 3.2 bar (45 psi) and cuts out at 4.2 bar (60 psi). Designed to self-prime up to a 3 m vertical lift and run dry without damage, it includes snap-in ports for 19 mm (3/4 in) bore hose or Hep20 push-fit connectors (CW193), a Pumpguard strainer, and automatic thermal overload protection. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 52600-0292 Par Max 7 pressure-controlled pump is a high-efficiency, self-priming multi-diaphragm unit built to support multiple outlets with smooth, quiet operation. It self-primes up to 3 meters of vertical lift, delivers up to 26.5 liters per minute open flow, and regulates pressure up to 2.7 bar (40 psi) via its integrated pressure switch. Snap-in ports simplify hose or connector installation, while the included Pumpguard strainer plus automatic thermal overload cut-out and circuit breaker help protect the motor during operation, even if the pump runs dry. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 52600-0294 Par Max 7 pressure controlled pump delivers high efficiency flow with a multi diaphragm design, providing up to 26.5 liters per minute (5.8 gallons per minute) and a maximum pressure of 2.7 bar (40 psi). It self primes up to 3 meters, supports multiple outlets, and uses snap in ports for 19 mm (3/4 inch) hoses or Hep20 connectors. Quiet operation, run dry capability without damage, and automatic thermal overload protection help support dependable performance, while the included Pumpguard strainer helps maintain smooth operation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 52700-0092 Ultra 7 washdown diaphragm pump delivers high-performance, pressure-controlled cleaning for demanding environments. Its new 5-chamber design supports dry running, while the sealed motor and seawater suitability enhance durability for tough washdown duties. With up to 5.7 bar (80 psi) maximum pressure, 26.5 litres/minute (5.8 gallons/minute) output, and self-priming up to 2.5 meters vertical lift, it is built for reliable, high-capacity washdown operation and connects to 19 mm (3/4”) bore hoses. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 52700-0094 Ultra 7 washdown diaphragm pump delivers pressure-controlled, heavy-duty cleaning performance for demanding marine, industrial, and agricultural use. Its 5-chamber diaphragm design provides up to 26.5 LPM (5.8 GPM) at 5.7 bar (80 psi), supports self-priming up to 2.5 m vertical lift, and can run dry to help protect service life in real-world washdown conditions. Built with a corrosion-resistant polypropylene housing, nitrile diaphragm, stainless steel fasteners, and an IP55 sealed motor, it is suitable for both fresh and seawater systems, and comes supplied with an inlet strainer, trigger nozzle, and port fittings for straightforward installation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 5330-9001 flexible-impeller transfer pump is a durable unit for marine and industrial fluid handling, using a corrosion-resistant bronze body, a neoprene impeller, and a carbon/ceramic face shaft seal for reliable, leak-free operation. Its self-priming design supports easy start-up, while manual operation means no electric motor is required. Delivering a flow rate of up to 35 LPM with a maximum pressure of 2.5 bar (36 psi) and an operating temperature range of 0°C to 60°C (32°F to 140°F), it suits bilge pumping, water transfer, and wastewater management, and is compatible with a range of hoses and fittings. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 58040-2012 deluxe flush electric toilet is a 12 volt DC fresh water flush sanitation unit for marine and RV use, combining an elegant concealed-plumbing design with a quiet, efficient flush cycle. It supports low water usage (as low as 1 litre per flush) and touchpad-controlled rinse options, while fitting common marine hose sizes including 19 mm inlet and 38 mm discharge connections. Supplied with a solenoid valve and siphon breaker assembly, it is compatible with remote-mounted pressurized water pumps delivering at least 11 litres per minute and uses a 25 amp fuse for protection. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 58060-1012 deluxe flush electric toilet delivers a quiet, efficient fresh-water flush solution for marine and RV environments on 12V DC power. Its elegant 14-inch bowl styling conceals plumbing and wiring, while the white vitreous china bowl and regular household-size seat enhance onboard comfort. Designed to use as little as 1 liter per flush and less than 1 amp-hour per day, it includes a solenoid valve and siphon breaker assembly for controlled flushing, supports 19 mm (3/4 in) inlet and 38 mm (1-1/2 in) discharge hoses, and can be supplied by a remote-mounted automatic pressurized water pump delivering at least 11 liters per minute; this model is noted as no longer available, with Jabsco 58060-3012 listed as an alternative. |
Our managers will contact you and clarify the terms of the order
|
What is the function of a Jabsco marine toilet, and how does it differ from other types of marine toilets?
A Jabsco marine toilet is designed to handle marine sanitation efficiently by flushing waste into a holding tank or overboard, depending on regulations. It differs from other types of marine toilets by offering both manual and electric models, including the quiet flush variant, which reduces noise for a more comfortable onboard experience. As a leading manufacturer, Jabsco provides reliable marine waste system components that integrate seamlessly with other marine products, such as bilge pumps and water systems, ensuring smooth operation and sanitation on any vessel.
A key advantage of using Jabsco marine toilets is their ability to integrate seamlessly with other Jabsco products, such as searchlights and marine waste systems, providing a comprehensive solution for onboard needs. With expertise in marine water systems, Jabsco ensures that both manual and electric toilet models, including the Jabsco manual toilet, function efficiently even under challenging conditions. Established as an expert in the field, Jabsco continues to innovate and provide high-quality sanitation solutions that meet the demands of marine environments.
How does the Jabsco engine cooling pump help maintain engine temperature and performance in marine environments?
The Jabsco engine cooling pump plays a crucial role in maintaining engine temperature and performance in marine environments by circulating water through the engine to dissipate heat. This pump ensures that the engine runs smoothly by preventing overheating, which can lead to mechanical failure. As a part of Jabsco marine products, these pumps are designed for durability and efficiency, providing reliable performance with easy access to spares and accessories for maintenance.
In what types of boats are Jabsco bilge pumps most commonly used, and why?
Jabsco bilge pumps are most commonly used in a variety of boats, including fishing boats, sailboats, and cruisers, due to their reliability and efficiency in removing excess water. These marine pumps, often combined with rule pumps and equipped with reliable valves, ensure effective water discharge and prevent flooding, maintaining optimal safety and performance. Their widespread use is supported by the brand's reputation for quality and the availability of replacement parts.