Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 28528-23200 flange bolt is a securing fastener used on the exhaust side of BUKH marine diesel engines, supporting dependable clamping of connected components in the exhaust manifold area. Specified for BUKH R210J installations on the exhaust manifold and turbocharger, and also used on BUKH S270J exhaust manifold assemblies, it helps maintain a stable, leak-resistant joint under heat and vibration. |
$ 1.94
-
+
|
|
1-2 weeks delivery time The Bukh 28537-3A000 turbocharger bolt is a dedicated fastening component for the turbocharger assembly on BUKH S270J marine diesel engines. It helps secure turbocharger-related joints and brackets for stable alignment under vibration and thermal cycling, supporting dependable boost system operation in marine service. |
$ 6.03
-
+
|
|
1-2 weeks delivery time The Bukh 28952-3A000 turbocharger outlet gasket provides a secure seal at the turbocharger outlet connection in the exhaust elbow and pipe assembly on BUKH S270J marine diesel engines. Designed for OEM fit, it helps prevent exhaust leakage, supports correct gas flow through the exhaust run, and promotes dependable turbo and exhaust system operation. |
$ 9.34
-
+
|
|
1-2 weeks delivery time The Bukh 29210-3A000 engine cover assembly is a purpose-built cover for the engine mount area on BUKH S270J marine diesel engines. Designed for clean OEM fit and dependable protection, it helps shield the mount-related engine hardware from dirt, spray, and general engine-room exposure while supporting a tidy, service-friendly installation. |
$ 1,085.50
-
+
|
|
1-2 weeks delivery time The Bukh 29240-2F500 engine cover assembly is a dedicated cover unit for the engine mount area on BUKH R210J marine diesel engines. Designed for proper OEM fit, it helps shield the mount assembly from onboard dirt and accidental contact, supporting a cleaner, more protected engine installation. |
$ 337.19
-
+
|
|
1-2 weeks delivery time The Bukh 29245-2A601 rubber insulator cover is a protective component for the engine mount on BUKH S270J marine diesel engines. It helps shield the mount’s insulating element from contamination and wear, supporting stable mounting performance and reducing the risk of vibration-related issues over time. |
$ 5.81
-
+
|
|
1-2 weeks delivery time The Bukh 29246-2A100 intake manifold bolt is a dedicated fastening component for securing the intake manifold on BUKH S270J marine diesel engines. Designed for an OEM-style fit in the intake system assembly, it helps maintain a stable, leak-resistant joint by keeping clamping force consistent under vibration and changing engine loads. |
$ 11.16
-
+
|
|
1-2 weeks delivery time The Bukh 29246-3C500 engine cover mounting bolt secures key top-end hardware on BUKH R210J marine diesel engines, used in both the rocker cover and intake manifold assemblies. Designed for dependable clamping and a clean, vibration-resistant installation, it helps keep covers and mating surfaces firmly held during continuous marine operation. |
$ 11.62
-
+
|
|
1-2 weeks delivery time The Bukh 31400-3A100 fuel rail assembly is a fuel line component for BUKH S270J marine diesel engines, built to support stable fuel distribution within the engine’s fuel system. Designed as an OEM-fit replacement, it helps maintain clean, secure routing and consistent delivery to keep the engine running smoothly under marine operating conditions. |
$ 6,283.75
-
+
|
|
1-2 weeks delivery time The Bukh 31401-2F600 fuel rail pressure sensing unit monitors rail pressure in the fuel line system on BUKH R210J marine diesel engines. By providing accurate pressure feedback for fuel system control, it supports stable engine running and dependable performance under changing load conditions. |
$ 2,086.27
-
+
|
|
1-2 weeks delivery time The Bukh 31401-3A100 fuel rail assembly is a dedicated fuel-line component for BUKH S270J marine diesel engines, designed to route and distribute fuel reliably within the engine’s fuel system. Built for correct fit in the fuel line assembly, it supports stable fuel delivery and dependable engine operation in marine service. |
$ 6,704
-
+
|
|
1-2 weeks delivery time The Bukh 31402-2F600 fuel rail pressure regulator helps keep fuel delivery stable on BUKH R210J marine diesel engines. Installed in the fuel line, it controls rail pressure to support consistent injection conditions, promoting smooth running and reliable engine response under changing load. |
$ 2,615.99
-
+
|
|
1-2 weeks delivery time The Bukh 31411-2F600 fuel rail-to-injector tube is a dedicated fuel line component for BUKH R210J marine diesel engines, routing fuel from the rail to injector 1. Designed for a secure, correct-position fit within the fuel line system, it supports consistent fuel delivery and dependable injection performance. |
$ 92.91
-
+
|
|
1-2 weeks delivery time The Bukh 31412-2F600 fuel rail-to-injector tube (No. 2) is a dedicated fuel line component for BUKH R210J marine diesel engines. Designed to route pressurized fuel from the rail to injector number 2, it supports clean, consistent fuel delivery and dependable injection performance as part of the engine’s fuel line system. |
$ 96.44
-
+
|
|
1-2 weeks delivery time The Bukh 31421-3A100 fuel rail-to-injector tube is a dedicated fuel line component for BUKH S270J marine diesel engines. It routes fuel from the rail to the injection system with an OEM-correct fit, supporting clean, consistent delivery to the injectors for dependable combustion and steady engine performance. |
$ 138.66
-
+
|
|
1-2 weeks delivery time The Bukh 31423-3A100 pump-to-rail fuel tube is a dedicated fuel line component for BUKH S270J marine diesel engines. Designed to route fuel from the pump to the fuel rail, it supports stable fuel delivery and helps maintain consistent engine performance in marine operating conditions. |
$ 169.49
-
+
|
|
1-2 weeks delivery time The Bukh 31425-2F600 pump-to-rail tube is a fuel line component for BUKH R210J marine diesel engines, routing fuel from the pump to the fuel rail. Designed for a precise OEM-style fit within the fuel line system, it supports clean, consistent fuel delivery and dependable engine operation in marine service. |
$ 111.73
-
+
|
|
1-2 weeks delivery time The Bukh 31427-3A000 rail-to-rail fuel line tube is a dedicated fuel line component for BUKH S270J marine diesel engines. Installed in the fuel line system, it provides a secure connection between rails to support consistent fuel delivery and dependable engine operation in marine service. |
$ 237.92
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.