Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 28304-85000 flange-head bolt is a dedicated fastener for the main bracket on BUKH S270J marine diesel engines. Designed to secure bracket-mounted components with a broad load-bearing head, it supports stable alignment and helps maintain dependable engine installation under vibration and marine operating loads. |
$ 7.73
-
+
|
|
1-2 weeks delivery time The Bukh 28310-3A100 intake manifold assembly routes clean intake air into the cylinders of BUKH S270J marine diesel engines for stable combustion and responsive power delivery. Designed as an OEM-grade replacement for the intake manifold system, it supports consistent airflow distribution and dependable engine operation in marine duty. |
$ 3,321.62
-
+
|
|
1-2 weeks delivery time The Bukh 28312-2F000 intake manifold gasket provides a dependable seal between the intake manifold and the engine on BUKH R210J marine diesel engines. Designed for the intake system, it helps prevent air leaks that can affect running quality, supporting stable airflow into the cylinders and consistent engine performance. |
$ 33.21
-
+
|
|
1-2 weeks delivery time The Bukh 28312-3A100 intake manifold gasket provides a secure seal at the intake manifold on BUKH S270J marine diesel engines. Designed to restore proper joint sealing during service work, it helps prevent air leaks at the manifold interface for stable engine breathing and dependable operation. |
$ 17.94
-
+
|
|
1-2 weeks delivery time The Bukh 28313-3A100 intake manifold sealing gasket is designed for the BUKH S270J intake manifold, helping maintain a tight, leak-resistant joint between mating surfaces. It supports stable airflow into the engine and dependable running by protecting the intake system from air leaks that can affect performance. |
$ 6.86
-
+
|
|
1-2 weeks delivery time The Bukh 28315-3A100 upper intake manifold gasket is a sealing element for the intake manifold assembly on BUKH S270J marine diesel engines. It helps maintain a tight, leak-resistant joint at the upper intake manifold connection, supporting stable airflow through the intake system and dependable engine operation. |
$ 12.05
-
+
|
|
1-2 weeks delivery time The Bukh 28330-3A100 upper intake manifold assembly supports clean, balanced air delivery on BUKH S270J marine diesel engines. Installed on the intake manifold system, it routes intake airflow into the engine for efficient combustion, dependable throttle response, and consistent performance in marine duty. |
$ 1,486.15
-
+
|
|
1-2 weeks delivery time The Bukh 28436-3A100 fastener bolt is used in the BUKH S270J engine oil pump assembly to help secure components in the lubrication system. Supplied as an OEM replacement part, it supports stable oil pump installation and dependable engine operation in marine service, and is also referenced in oil pump belt listings for the same engine group. |
$ 2.68
-
+
|
|
1-2 weeks delivery time The Bukh 28455-82000 gasket is a sealing element for the coolant pipe and hose assembly on BUKH R210J marine diesel engines. It helps maintain a tight, leak-resistant joint in the engine cooling circuit, supporting stable coolant flow and dependable temperature control underway. |
$ 9.34
-
+
|
|
1-2 weeks delivery time The Bukh 28476-3A100 flange bolt is a dedicated exhaust-manifold fastener for BUKH S270J marine diesel engines. Designed to secure exhaust-manifold joints under heat and vibration, it helps maintain a tight, reliable connection to support safe exhaust flow and dependable engine operation. |
$ 2.04
-
+
|
|
1-2 weeks delivery time The Bukh 28492-3A100 exhaust closure gasket seals the exhaust closure connection on the exhaust manifold of BUKH S270J marine diesel engines. Designed for a precise OEM-style fit, it helps prevent exhaust gas leakage and supports reliable manifold sealing under marine operating temperatures and vibration. |
$ 9.34
-
+
|
|
1-2 weeks delivery time The Bukh 28515-2A100 threaded stud is a fastening component used on the turbocharger and exhaust manifold of BUKH S270J marine diesel engines. It helps secure critical exhaust-side hardware for a stable, leak-resistant assembly that stands up to heat and vibration in continuous marine operation. |
$ 10.43
-
+
|
|
1-2 weeks delivery time The Bukh 28515-3A000 exhaust manifold gasket is a sealing element for the exhaust manifold joint on BUKH S270J marine diesel engines. It helps maintain a tight seal between mating surfaces, supporting clean exhaust flow and reducing the risk of leaks that can affect performance and engine-room safety. |
$ 17.82
-
+
|
|
1-2 weeks delivery time The Bukh 28521-2F600 exhaust manifold gasket provides a secure seal in the exhaust manifold and turbocharger assembly on BUKH R210J marine diesel engines. Designed for a precise OEM-style fit, it helps maintain proper exhaust gas flow and supports reliable, leak-resistant operation in harsh marine environments. |
$ 32.31
-
+
|
|
1-2 weeks delivery time The Bukh 28522-3A500 exhaust sealing gasket is made for the exhaust manifold and exhaust pipe connection on BUKH S270J marine diesel engines. It helps maintain a tight seal in the exhaust system, supporting safe routing of hot exhaust gases and reducing the risk of leaks at the manifold joint. |
$ 8.80
-
+
|
|
1-2 weeks delivery time The Bukh 28524-3A000 flange nut is a marine-grade fastening component used on the turbocharger and exhaust manifold assemblies of BUKH S270J engines. Its integrated flange helps spread clamping load for a secure hold, supporting reliable assembly retention in high-heat, high-vibration exhaust-system environments. |
$ 4.79
-
+
|
|
1-2 weeks delivery time The Bukh 28526-3A000 fastening bolt secures the exhaust manifold on BUKH S270J marine diesel engines. Built for a precise OEM fit in the exhaust assembly, it helps keep the manifold firmly clamped to maintain a tight, stable exhaust installation under vibration and thermal cycling. |
$ 8.70
-
+
|
|
1-2 weeks delivery time The Bukh 28526-3A100 bolt is a dedicated fastener used in the turbocharger assembly on BUKH S270J marine diesel engines. Built for secure clamping and dependable retention, it helps keep turbocharger-mounted components properly fastened under vibration and thermal cycling in marine operation. |
$ 54.80
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.