Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 22312-3A120 right-hand cylinder head gasket is a sealing component for the right-hand cylinder head on BUKH S270J marine diesel engines. Designed to maintain secure combustion and coolant/oil sealing at the cylinder head joint, it supports stable engine operation and helps protect the top end from leakage under marine duty cycles. |
$ 402.38
-
+
|
|
1-2 weeks delivery time The Bukh 22321-2F000 cylinder head bolt is a dedicated fastener for the cylinder head assembly on BUKH R210J marine diesel engines. It helps clamp the cylinder head securely in place to maintain stable sealing and withstand the high loads and vibration typical of marine engine operation. |
$ 22.90
-
+
|
|
1-2 weeks delivery time The Bukh 22321-3A000 cylinder head bolt is a critical fastening component used on the cylinder head assembly of BUKH S270J marine diesel engines. It helps secure the cylinder head to maintain a stable, tight clamping load, supporting dependable sealing and consistent engine operation in marine service. |
$ 21.39
-
+
|
|
1-2 weeks delivery time The Bukh 22331-3A100 right-hand engine hanger is a structural mounting component for BUKH S270J marine diesel engines, positioned at the cylinder head area. It supports secure engine installation by helping carry engine loads and maintaining alignment, contributing to stable operation and reduced vibration transfer into the hull structure. |
$ 88.98
-
+
|
|
1-2 weeks delivery time The Bukh 22410-3A000 left rocker cover assembly is a dedicated valve-train cover for BUKH S270J marine diesel engines, fitted on the rocker cover area. It helps protect the rocker gear and valve components from contamination while supporting a clean, controlled top-end environment for dependable engine operation. |
$ 347.58
-
+
|
|
1-2 weeks delivery time The Bukh 22412-3A000 cylinder head cover gasket seals the rocker cover joint on BUKH S270J marine diesel engines to help keep oil contained and contaminants out. Designed for a precise fit on the cylinder head cover area, it supports clean, leak-resistant operation and reliable valve-train protection in marine service. |
$ 63.30
-
+
|
|
1-2 weeks delivery time The Bukh 22413-3A000 cylinder head cover gasket seals the rocker cover area on BUKH S270J marine diesel engines. Installed between the head cover and mating surface, it helps keep oil contained within the valve train compartment, supporting a clean, stable seal for reliable operation. |
$ 63.30
-
+
|
|
1-2 weeks delivery time The Bukh 22420-3A000 right-hand rocker cover assembly provides a secure top-end enclosure for the rocker cover area on BUKH S270J marine diesel engines. Designed as an OEM replacement, it helps retain oil where it belongs while shielding the valvetrain from contamination, supporting clean operation and dependable service. |
$ 347.58
-
+
|
|
1-2 weeks delivery time The Bukh 22441-2F600 large rocker cover gasket is a sealing element for the rocker cover on BUKH R210J marine diesel engines. Installed between the cover and the cylinder head area, it helps maintain a clean, leak-resistant joint that supports stable crankcase sealing and tidy engine operation in marine service. |
$ 75.53
-
+
|
|
1-2 weeks delivery time The Bukh 22443-2F600 rocker cover gasket provides a secure seal between the rocker cover and its mating surface on BUKH R210J marine diesel engines. Designed for the rocker cover assembly, it helps prevent oil leakage and supports clean, stable operation of the valve train area. |
$ 65.29
-
+
|
|
1-2 weeks delivery time The Bukh 23040-2F973 standard piston ring set is a piston sealing component set for BUKH R210J marine diesel engines in the crankshaft and piston assembly. It supports strong compression control and stable oil regulation at the piston, helping the engine maintain efficient combustion and dependable running under marine load. |
$ 616.28
-
+
|
|
1-2 weeks delivery time The Bukh 23040-3A901 standard piston ring set is a precision replacement set for the crankshaft and piston assembly on BUKH S270J marine diesel engines. Designed to support strong cylinder sealing, it helps maintain proper compression and controlled oil film for efficient combustion and dependable engine operation under continuous marine load. |
$ 1,900.48
-
+
|
|
1-2 weeks delivery time The Bukh 23060-2F930 connecting rod bearing pair set is a matched bearing set for the crankshaft and piston assembly on BUKH R210J marine diesel engines. Designed to support smooth connecting rod rotation on the crankshaft journal, it helps maintain stable oil film control, reduces friction, and promotes dependable bottom-end operation under continuous marine load. |
$ 56.13
-
+
|
|
1-2 weeks delivery time The Bukh 23060-3A902 connecting rod bearing pair set is a standard-grade bearing set for the crankshaft and piston assembly on BUKH S270J marine diesel engines. Supplied as a matched pair, it supports smooth connecting rod rotation on the crankshaft journal, helping maintain stable oil-film lubrication and reliable operation under marine load. |
$ 210.66
-
+
|
|
1-2 weeks delivery time The Bukh 23060-3A912 connecting rod bearing pair set supports smooth, stable crankshaft rotation in BUKH S270J marine diesel engines. Supplied as a matched pair for the crankshaft and piston assembly, this standard B yellow-coded bearing set helps maintain correct oil film control and protects the connecting rod journal surfaces under continuous marine load. |
$ 210.66
-
+
|
|
1-2 weeks delivery time The Bukh 23060-3A922 connecting rod bearing pair set is a standard-size, grade C (red) bearing set for the crankshaft and piston assembly on BUKH S270J marine diesel engines. It supports smooth connecting-rod rotation on the crankshaft journal, helping maintain stable oil clearance, reduce friction, and protect critical bottom-end components under continuous marine load. |
$ 210.66
-
+
|
|
1-2 weeks delivery time The Bukh 23121-3A000 crankshaft sprocket is a timing drive component used in the camshaft system on BUKH S270J marine diesel engines. It transmits crankshaft rotation to the timing mechanism to keep valve timing synchronized, supporting smooth running and dependable engine performance. |
$ 265.39
-
+
|
|
1-2 weeks delivery time The Bukh 23124-3A001 crankshaft pulley damper helps stabilize crankshaft operation on BUKH S270J marine diesel engines by reducing torsional vibration while driving belt-powered auxiliaries. Installed in the crankshaft and piston assembly area, it supports smoother power transmission, quieter running, and reduced stress on front-end engine components. |
$ 498.25
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.