Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 22141-3A000 injector locator bracket is a cylinder head mounting component for BUKH S270J marine diesel engines, designed to position and secure the injector correctly in the cylinder head assembly. By keeping the injector aligned and stable, it supports consistent injector seating and dependable operation in demanding marine service. |
$ 6.03
-
+
|
|
1-2 weeks delivery time The Bukh 22161-2A000 cylinder head stud is a critical fastening element for the cylinder head assembly on BUKH S270J marine diesel engines. It helps secure the cylinder head to maintain clamping force and sealing integrity under combustion loads, supporting dependable engine operation in marine service. |
$ 3.11
-
+
|
|
1-2 weeks delivery time The Bukh 22211-2F000 intake valve is a cylinder head valve-train component for BUKH R210J marine diesel engines. Installed in the cylinder head, it controls the intake airflow into the combustion chamber, supporting clean breathing, consistent combustion, and dependable engine performance under marine operating loads. |
$ 40.82
-
+
|
|
1-2 weeks delivery time The Bukh 22211-3A000 intake valve is a precision engine valvetrain component for the BUKH S270J cylinder head. It controls incoming air charge into the combustion chamber, supporting efficient breathing and stable combustion timing while maintaining correct sealing in the cylinder head assembly. |
$ 54.80
-
+
|
|
1-2 weeks delivery time The Bukh 22212-2F100 exhaust valve is a precision valvetrain component for the cylinder head on BUKH R210J marine diesel engines. It controls the release of exhaust gases from the combustion chamber, helping the engine breathe correctly, maintain efficient combustion cycles, and support dependable power delivery under marine load. |
$ 75.07
-
+
|
|
1-2 weeks delivery time The Bukh 22212-3A000 exhaust valve is a cylinder head valvetrain component for BUKH S270J marine diesel engines. Installed in the cylinder head, it controls the discharge of exhaust gases from the combustion chamber, helping maintain clean gas flow, stable combustion cycles, and dependable engine operation in marine service. |
$ 65.01
-
+
|
|
1-2 weeks delivery time The Bukh 22221-3A000 valve spring is a cylinder head valvetrain component for BUKH S270J marine diesel engines. Installed in the cylinder head, it maintains the correct closing force on the valve for controlled movement and consistent sealing, supporting stable combustion and dependable engine operation. |
$ 13.66
-
+
|
|
1-2 weeks delivery time The Bukh 22223-3A000 valve spring retainer is a cylinder head valvetrain component used on BUKH R210J and S270J marine diesel engines. It secures the valve spring assembly in place to maintain correct valve control, supporting stable operation and dependable sealing under continuous marine duty. |
$ 7.22
-
+
|
|
1-2 weeks delivery time The Bukh 22224-3A000 valve stem seal is a cylinder head sealing component for BUKH S270J marine diesel engines. Installed on the valve stem area, it helps control oil flow along the valve guide, supporting clean, stable valve operation and reducing oil carryover into the combustion process. |
$ 9.48
-
+
|
|
1-2 weeks delivery time The Bukh 22226-3A000 upper valve bearing is a cylinder head component for BUKH S270J marine diesel engines, used in the valve train arrangement. Installed in the cylinder head for positions (2) and (3), it supports accurate valve motion and helps maintain stable, reliable operation under continuous marine duty. |
$ 5.18
-
+
|
|
1-2 weeks delivery time The Bukh 22231-4A001 rocker arm lash adjuster assembly is built for accurate valve clearance setting on BUKH S270J marine diesel engines. Installed in the cylinder head rocker gear, it supports stable valvetrain operation by helping maintain correct lash, promoting smooth running and dependable performance across operating loads. |
$ 66.75
-
+
|
|
1-2 weeks delivery time The Bukh 22311-2F650 cylinder head sealing gasket is designed for the cylinder head joint on BUKH R210J marine diesel engines. With a specified thickness of 1.3, it helps maintain a tight seal between the cylinder head and engine block, supporting stable compression and protecting the coolant and combustion passages in the cylinder head assembly. |
$ 322.81
-
+
|
|
1-2 weeks delivery time The Bukh 22311-2F660 cylinder head gasket is a precision sealing element for the cylinder head joint on BUKH R210J marine diesel engines. It helps maintain combustion sealing while separating coolant and oil passages, supporting stable compression, clean running, and dependable service after cylinder head work. |
$ 322.81
-
+
|
|
1-2 weeks delivery time The Bukh 22311-3A100 left cylinder head gasket is a critical sealing element for the left-hand cylinder head on BUKH S270J marine diesel engines. Installed in the cylinder head assembly, it helps maintain proper compression and fluid separation, supporting clean operation and dependable engine reliability in marine service. |
$ 402.38
-
+
|
|
1-2 weeks delivery time The Bukh 22311-3A110 left-hand cylinder head gasket (Grade A) is a precision sealing element for the cylinder head assembly on BUKH S270J marine diesel engines. It helps maintain compression and keeps oil and coolant passages properly sealed at the head-to-block interface for stable, reliable engine operation. |
$ 388.62
-
+
|
|
1-2 weeks delivery time The Bukh 22311-3A120 left-hand cylinder head sealing gasket (Grade C) is built for the cylinder head assembly on BUKH S270J marine diesel engines. It helps maintain a secure seal between the cylinder head and engine block, supporting stable compression and keeping coolant and combustion gases properly separated in demanding marine operation. |
$ 402.38
-
+
|
|
1-2 weeks delivery time The Bukh 22312-3A100 right-hand cylinder head gasket provides a secure seal between the right-hand cylinder head and the engine block on BUKH S270J marine diesel engines. Designed for dependable service in the cylinder head assembly, it helps maintain proper combustion sealing and supports stable coolant and oil separation under marine operating loads. |
$ 402.38
-
+
|
|
1-2 weeks delivery time The Bukh 22312-3A110 right-hand cylinder head gasket, Grade A, is a sealing element for the cylinder head assembly on BUKH S270J marine diesel engines. It helps maintain correct compression and keeps combustion gases, coolant, and engine oil properly separated, supporting clean running and dependable service under marine loads. |
$ 388.62
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.