Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 620A2114 O-ring is a sealing element for BUKH DV10LSME marine diesel engines, designed to help prevent fluid leakage at mating surfaces within the engine system. As an OEM-grade replacement seal, it supports secure assembly, reliable operation, and clean, leak-controlled service in marine conditions. |
$ 15.29
-
+
|
|
1-2 weeks delivery time The Bukh 620A2115 washer is a precision fastening element for the DV10LSME saildrive assembly, helping distribute clamping load and support secure, vibration-resistant joints in the drive installation. It’s suited for marine service where reliable fit and stable fastener retention are essential. |
$ 154.27
-
+
|
|
1-2 weeks delivery time The Bukh key bolt is intended for marine engine fastening and mechanical locking applications. |
$ 46.61
-
+
|
|
1-2 weeks delivery time The Bukh 620A2120 fastening screw is a genuine Bukh hardware component used to secure parts within marine engine assemblies. It helps maintain a tight, reliable connection under vibration and continuous onboard operation, making it well-suited for service and replacement work on Bukh equipment. |
$ 49.01
-
+
|
|
1-2 weeks delivery time The Bukh washer is intended for marine engine assembly and spacing applications. |
$ 10.94
-
+
|
|
1-2 weeks delivery time The Bukh washer is intended for marine engine assembly and spacing applications. |
$ 17.87
-
+
|
|
1-2 weeks delivery time The Bukh 620A2153 disc is a precision-fit hardware component used within Bukh marine engine assemblies to support correct part positioning and secure component stack-up. Ideal for service replacements, it helps maintain reliable alignment and consistent mechanical retention where a disc-type spacer or bearing surface is required. |
$ 13.32
-
+
|
|
1-2 weeks delivery time The Bukh washer is designed for marine engine assembly and spacing applications. |
$ 33.54
-
+
|
|
1-2 weeks delivery time The Bukh washer is intended for marine engine assembly and spacing applications. |
$ 38.55
-
+
|
|
1-2 weeks delivery time The Bukh 620A2158 adjusting shim 0.2 is a precision spacing element used to fine-tune clearances during assembly or service. Ideal for controlled adjustments where accurate positioning matters, this shim helps support correct component alignment and stable operation in Bukh marine engine systems. |
$ 38.09
-
+
|
|
1-2 weeks delivery time The Bukh washer is intended for marine engine spacing and assembly applications. |
$ 16.29
-
+
|
|
1-2 weeks delivery time The Bukh washer is designed for marine engine precision spacing applications. |
$ 16.29
-
+
|
|
1-2 weeks delivery time The Bukh washer is intended for marine engine assembly and spacing applications. |
$ 16.29
-
+
|
|
1-2 weeks delivery time The Bukh washer is designed for marine engine spacing and service applications. |
$ 16.29
-
+
|
|
1-2 weeks delivery time The Bukh washer is designed for marine engine assembly and spacing applications. |
$ 16.29
-
+
|
|
1-2 weeks delivery time The Bukh 620A2168 spacer shim (1.5 mm) is a precision spacing component used to set correct clearances and alignment within marine engine assemblies. Installed where controlled stand-off is required, it helps maintain consistent component positioning, reducing the risk of misalignment and uneven wear over time. |
$ 7.41
-
+
|
|
1-2 weeks delivery time The Bukh washer is intended for marine engine spacing and assembly applications. |
$ 8.99
-
+
|
|
1-2 weeks delivery time The Bukh 620A2210 disc spring is a precision spring element used to maintain consistent clamping force in Bukh marine engine assemblies. Designed to help resist loosening under vibration and thermal cycling, it supports secure, reliable fastening in demanding onboard operating conditions. |
$ 93.22
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.