Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh hydraulic starter is designed for EPA28 and EPA36 marine engine starting system applications. |
$ 21,579.41
-
+
|
|
1-2 weeks delivery time The Bukh Hydrostart kit is designed for EPA28 and EPA36 marine engine hydraulic starting systems. |
$ 50,445.83
-
+
|
|
1-2 weeks delivery time The Bukh reset assembly is designed for marine engine control or hydraulic system service applications. |
$ 324.39
-
+
|
|
1-2 weeks delivery time The Bukh 612Z0499 key is a precision locking element used to locate a mating component on a shaft and help transmit torque without slip. Ideal for marine engine and drivetrain service work, this OEM-style key supports secure alignment and dependable power transfer in rotating assemblies. |
$ 68.31
-
+
|
|
1-2 weeks delivery time The Bukh 620A1212 spacer is a 3.7 mm shim element used to set correct spacing and alignment in marine engine assemblies. It helps maintain proper clearances during service work, supporting reliable fit-up and consistent component positioning in Bukh marine applications. |
$ 375.27
-
+
|
|
1-2 weeks delivery time The Bukh 620A1215 sealing ring is a precision sealing element designed to help maintain tight, leak-resistant joints in marine engine and onboard fluid systems. Ideal for service and replacement work, it supports dependable sealing performance where secure connections are essential for reliable operation at sea. |
$ 5.64
-
+
|
|
1-2 weeks delivery time The Bukh outer disc is designed for marine drivetrain or coupling system applications. |
$ 148.46
-
+
|
|
1-2 weeks delivery time The Bukh inner coupling disc is intended for marine drivetrain coupling applications. |
$ 147.07
-
+
|
|
1-2 weeks delivery time The Bukh 620A1226 indexing bolt is a detent-style locking fastener used to locate and secure a component in a defined position on Bukh 27015 assemblies. It helps maintain correct alignment during operation and servicing, providing a dependable, repeatable indexing point where controlled positioning is required. |
$ 134.49
-
+
|
|
1-2 weeks delivery time The Bukh 620A1230 sealing gasket is a Bukh replacement part referenced as 27042, designed to restore a tight, leak-resistant joint in the relevant engine or system assembly. A fresh gasket helps maintain proper sealing between mating surfaces, supporting clean operation and dependable service in marine installations. |
$ 39.33
-
+
|
|
1-2 weeks delivery time The Bukh 620A1236 radial sealing ring (reference -27083-) is a precision shaft seal in size 25x33x6, designed to help retain fluids and keep contaminants out where a rotating shaft passes through a housing. It supports clean, reliable operation in marine engine and drivetrain assemblies by maintaining a stable seal at the shaft interface. |
$ 43.39
-
+
|
|
1-2 weeks delivery time The Bukh sealing plug is intended for marine engine fluid system sealing applications. |
$ 65.17
-
+
|
|
1-2 weeks delivery time The Bukh 620A1278 O-ring sealing element is designed to create a tight, leak-resistant seal in Bukh marine engine and system connections. By maintaining sealing integrity at joined surfaces, it helps protect against fluid leakage and supports dependable operation in a marine environment. |
$ 28.90
-
+
|
|
1-2 weeks delivery time The Bukh 620A1280 sealing O-ring is designed for the BW7 dipstick (30653), helping maintain a tight seal at the dipstick interface. By reducing the risk of oil seepage and keeping contaminants out, it supports clean, reliable service during routine level checks and onboard maintenance. |
$ 12.08
-
+
|
|
1-2 weeks delivery time The Bukh 620A1287 locking ring is a retaining fastener used to secure fitted components in place within marine engine assemblies. It helps prevent unwanted axial movement, supporting stable alignment and reliable operation in high-vibration marine environments. |
$ 23.99
-
+
|
|
1-2 weeks delivery time The Bukh 620A2102 needle bearing is a precision bearing element for Bukh sail drive assemblies, supporting smooth shaft rotation under load. Designed as a direct-fit replacement, it helps maintain stable alignment and reduces friction in the drive train to support dependable propulsion performance. |
$ 347.94
-
+
|
|
1-2 weeks delivery time The Bukh 620A2103 thrust washer is a precision spacer element used to manage axial movement in rotating assemblies. Designed to help control end-float and handle thrust loads where shafts and bearings run under load, it supports smooth operation and helps protect adjacent components from wear in Bukh engine applications. |
$ 290.89
-
+
|
|
1-2 weeks delivery time The Bukh clamping pin is intended for marine engine retaining and assembly applications. |
$ 6.86
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.