Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus HT1016SD1 is a variable load-sensing hydraulic piston pump with a 30 cm³ displacement, designed for mounting on a main or auxiliary engine. It features a cast-iron low-noise housing, SAE-B flange with a 13-tooth spline shaft, side suction and pressure ports, and left-hand (anti-clockwise) rotation. Compatible with PRM gearboxes and capable of operating at speeds up to 3600 rpm.
|
$ 4,447.80
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1016SD2 is a 45 cm³ variable load-sensing hydraulic piston pump designed for marine applications. It features a cast-iron low-noise housing, SAE-B flange with a 13-tooth spline shaft, side-mounted suction and pressure connections, and left-hand (anti-clockwise) rotation. Suitable for main or auxiliary engine mounting and compatible with PRM gearboxes, with a maximum operating speed of 2800 rpm.
|
$ 4,606.65
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1017E62 is a 62 cm³ variable load-sensing hydraulic piston pump with right-hand (clockwise) rotation, designed for mounting on a main or auxiliary marine engine. It features a cast-iron low-noise housing, SAE-B flange with a 13-tooth spline shaft, and rear suction and pressure ports. Compatible with Twindisc gearboxes and capable of operating up to 2880 rpm.
|
$ 7,388.41
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1017SD1 is a 30 cm³ variable load-sensing hydraulic piston pump featuring right-hand (clockwise) rotation, a cast-iron low-noise housing, SAE-B flange with 13-spline shaft, and side suction/pressure ports. It is designed for installation on a main or auxiliary engine and is compatible with Twindisc gearboxes, operating at speeds up to 3600 rpm.
|
$ 4,690.93
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1017SD2 is a 45 cm³ variable load-sensing hydraulic piston pump with right-hand (clockwise) rotation, designed for marine engine-driven hydraulic systems. It features a cast-iron low-noise housing, SAE-B flange with 13-spline shaft, and side-mounted suction/pressure ports. Compatible with Twindisc gearboxes and capable of operating up to 2800 rpm.
|
$ 4,606.65
-
+
| ||
|
Vetus HT1022SD - Variably Adjustable Piston Pump, 75 cm³, Left Handed, SAE-C Flange, Side Connection
1-2 weeks delivery time The Vetus HT1022SD is a 75 cm³ variable load-sensing hydraulic piston pump with left-hand (anti-clockwise) rotation, designed for main or auxiliary marine engine installation. It features a low-noise cast-iron housing, SAE-C flange with 14-tooth spline shaft, and side suction/pressure ports. Suitable for Twindisc gearboxes and capable of operating up to 2880 rpm.
|
$ 7,229.55
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1023SD is a 75 cm³ variable load-sensing hydraulic piston pump with right-hand (clockwise) rotation, featuring a cast-iron low-noise body, SAE-C flange with a 14-tooth spline shaft, and side-mounted suction and pressure connections. Designed for installation on a main or auxiliary engine and compatible with Twindisc gearboxes, the unit supports speeds up to 2880 rpm.
|
$ 7,229.55
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1016SD3 is a 100 cm³ variable load-sensing hydraulic piston pump with left-hand (anti-clockwise) rotation, designed for installation on a main or auxiliary marine engine. It features a robust cast-iron, low-noise housing, an SAE-C 4-bolt flange with a 17-tooth spline shaft, and side suction/pressure connections. Maximum operating speed: 2450 rpm.
|
$ 8,024.43
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1016SD4 is a 130 cm³ variable load-sensing hydraulic piston pump for marine applications. It features a cast-iron low-noise housing, left-hand (anti-clockwise) rotation, SAE-C 4-bolt flange with a 17-tooth spline shaft, and side suction/pressure connections. Designed for mounting on a main or auxiliary engine, with a maximum operating speed of 2200 rpm.
|
$ 9,295.85
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1027 piston pump (article HT1027) is a 45 cc variable load-sensing hydraulic pump designed for mounting on John Deere engine PTO systems. It features a clockwise rotation (right-hand), an aluminum housing with SAE-B flange interface, a 13-tooth splined drive shaft, side-positioned suction and pressure ports, and supports speeds up to 2800 RPM.
|
$ 4,606.65
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1028B hydraulic tank system (article HT1028B) is a compact 20-liter aluminum hydraulic reservoir designed for bow thrusters on vessels without an existing hydraulic installation. The unit is configured for fixed-displacement pumps (HT1029) and 24V valves, supplied complete with required steering and control components. Suitable for VETUS bow thruster models BOW55HMD and BOW95HMD, it features durable construction and a space-efficient layout with dimensions of 470 × 415 × 310 mm.
|
$ 4,250.81
-
+
| ||
|
1-2 weeks delivery time The Vetus HPTANK hydraulic tank (article HPTANK) is a 35 liter AISI 316 stainless steel reservoir designed for marine and industrial hydraulic systems. With compact overall dimensions of approximately 530 × 210 × 565 mm, it provides corrosion-resistant hydraulic oil storage and is supplied with an integrated filter and temperature sensor for reliable operation and system monitoring. The tank is suitable for use in 12 V and 24 V installations and can be connected to one or more compatible hydraulic pumps and circuits.
|
$ 2,421.53
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1010 hydraulic tank (article HT1010) is a 70-liter aluminium reservoir with a painted steel cover, designed as the base component of Vetus Power Hydraulic systems. It includes a return filter, temperature and content gauge, suction connection, a manifold for up to five hydraulic control devices, and a factory-mounted HT1013 bow/stern thruster solenoid valve. Suitable for 24 V systems, the tank typically provides sufficient oil cooling but may require an external cooler in cases of extended hydraulic appliance operation. Standard installed dimensions are approximately 530 × 565 × 210 mm.
|
$ 4,090.07
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1010BS hydraulic tank (article HT1010BS) is a 130-liter stainless steel AISI 316 reservoir designed for large marine hydraulic systems with dual engine or dual pump configurations. It is equipped with twin 2-inch ball valves, a return filter, a temperature and content gauge, and a low-level alarm. Suitable for 24 V control integration, it provides high oil volume for advanced custom-build hydraulic installations. Standard installed dimensions are approximately 470 × 415 × 310 mm, while the bare tank dimensions without control units are 700 × 410 × 460 mm.
|
$ 8,421.55
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1026 Manifold for Additional Control Units is an expansion base block designed for the V-Quipment accessory system. It includes an electrical connection box and is required when a vessel installation needs more than five steering and control units. Suitable for integration into compatible hydraulic steering configurations.
|
$ 2,021.28
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1011 Single Step Load Sensing Device is a single-stage steering and control unit designed for hydraulic systems requiring controllable working pressure, such as bow and stern thrusters. It provides zero or full flow depending on active load detection and includes an electrical connection box for complete system integration. Built for Power Hydraulics accessory configurations.
|
$ 1,213.89
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1012 Dual Step Load Sensing Device is a two-stage steering and control unit for hydraulic systems requiring both half-power and full-power pressure control, such as bow and stern thrusters. It delivers zero, partial, or full flow depending on real-time load conditions and is supplied with an electrical connection box for simplified integration into Power Hydraulics systems.
|
$ 2,218.27
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1013 Solenoid Control Unit is a 24V hydraulic control valve designed for bow and stern thrusters with a flow capacity of up to 60 litres per minute. Built for Power Hydraulics configurations, it supports efficient and responsive thrust control on a wide range of vessel types. A 12V version is available by special order.
|
$ 510.32
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1014 Directional Control Valve is a 24V solenoid-operated steering and control unit designed for mast-lowering devices, radar brackets, and other systems driven by hydraulic cylinders. It includes a counterbalance feature for safe motion control and is part of the Power Hydraulics accessory line. A 12V version is available upon special request.
|
$ 2,342.10
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1024 Solenoid Control Unit is designed for hydraulic stabilizer systems, serving as the power supply and steering/control interface when stabilizers are mounted on a base block and there is no available space on the tank base block. It operates on 24V and includes mounting links for simplified system integration within Power Hydraulics configurations.
|
$ 1,971.87
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.