Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus HT102311 Single Step Solenoid Control Unit is designed for anchor windlasses, capstans, and other hydraulic motor-driven equipment with a flow rate up to 60 litres per minute. It supports separate adjustment of pressure and oil flow to achieve precise operational control. The standard version operates at 24V, while a 12V version is available on special order. Optimized for marine Power Hydraulics systems.
|
$ 1,267.68
-
+
| ||
|
1-2 weeks delivery time The Vetus HT102312 Dual Step Solenoid Control Unit is designed for anchor windlasses, capstans, and other hydraulic motor-driven equipment with a flow requirement of up to 60 litres per minute. It operates in two power stages, with adjustable oil flow for optimized performance. The unit is supplied in a 24V version, while 12V is available upon special order as part of the Power Hydraulics accessory range.
|
$ 827.40
-
+
| ||
|
1-2 weeks delivery time The Vetus HT5034 Electrical Connection Box is a marine-grade junction unit (part number HT5034) designed for 12 V or 24 V hydraulic system installations; it centralises wiring for solenoid valves, control panels and power supply, ensuring clean, reliable and compact electrical integration for thrusters, windlasses and other hydraulic accessories on board.
|
$ 746.72
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1032 Proportional Valve SD is a 24 V proportional hydraulic valve designed for devices such as bow thrusters and anchor winches with hydraulic capacity between 40 and 130 litres. The valve adapts to the capacity of the connected device and is available in both 24 V and 12 V versions, providing smooth proportional control for marine hydraulic applications.
|
$ 3,260.18
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1035 Double Proportional Valve SD PGV is a 24 V dual proportional hydraulic control solution for consuming devices such as bow thrusters, stern thrusters and anchor winches. It supports a combined hydraulic capacity between 40 and 130 litres and can control two proportional loads in a single system. A 12 V option is available by special order.
|
$ 5,881.84
-
+
| ||
|
1-2 weeks delivery time The Vetus HT3057 is a dedicated connection kit (part number HT3057) for hydraulic bow (or stern) thrusters with thrust capacity 55 or 95 kgf; it provides all required hydraulic connections and fittings to ensure secure, reliable integration of the thruster, pump and hydraulic system, simplifying installation or retrofit on small to mid-size vessels.
|
$ 156.25
-
+
| ||
|
1-2 weeks delivery time The Vetus HT3056 Connection Kit is a dedicated installation set for hydraulic bow (or stern) thrusters rated up to 160 kgf (160 kgf thrust capacity), designed to interconnect thruster, hydraulic pump and control components reliably. The kit ensures secure mounting and hydraulic integration, simplifying installation for vessels using or upgrading hydraulic propulsion systems.
|
$ 162.99
-
+
| ||
|
1-2 weeks delivery time The Vetus HT3061 Connection Kit (part number HT3061) is a hydraulics installation set designed for hydraulic bow (or stern) thrusters rated at 230 kgf. The kit delivers all necessary hydraulic connection components to safely and reliably integrate a 230 kgf-class thruster with the vessel’s hydraulic system, simplifying installation or retrofit, ensuring correct pressure handling and compliance with marine standards.
|
$ 262.66
-
+
| ||
|
1-2 weeks delivery time The Vetus HT3058 Connection Kit (part number HT3058) is engineered for hydraulic bow or stern thrusters with thrust capacity up to 310 kgf. The kit includes all essential hydraulic fittings and connectors to enable secure, marine-rated installation of the thruster with hydraulic power unit, ensuring proper pressure handling and reliable operation on medium to large vessels.
|
$ 245.15
-
+
| ||
|
1-2 weeks delivery time The Vetus STAFIN04B is a stainless steel (AISI 316) fin stabilizer set (2-piece, total fin area 0.4 m²) designed for hydraulic stabilizer systems. It is intended for installation on yachts and motorboats to significantly reduce roll/pitch motions, offering “plug-and-play” installation for steel, GPR or aluminum hulls — ideal for retrofit or new builds needing reliable roll stabilization.
|
$ 19,711.37
-
+
| ||
|
1-2 weeks delivery time The Vetus STAFIN05B is a set of two stainless-steel AISI 316 fin stabilizers with a total fin area of 0.5 m², designed for installation below the waterline on both sides of yachts over 10 m. Using a hydraulic system and fully automatic control, the fins continuously adjust their angle to significantly reduce roll and pitch motion in heavy swell or rough weather. Each fin measures 1024 mm in length and 554 mm in height and is suitable for steel, GRP or aluminum hulls.
|
$ 21,048.26
-
+
| ||
|
1-2 weeks delivery time The Vetus STAFIN06B is a set of two stainless-steel AISI 316 fin stabilizers with a total fin area of 0.6 m², designed for installation beneath the waterline on yachts and motorboats. Each fin measures 1125 mm in length and 600 mm in height and operates via a 24 V hydraulic system with automatic computer control, significantly reducing roll and pitch on steel, GRP or aluminum vessels, including retrofit applications.
|
$ 22,135.30
-
+
| ||
|
1-2 weeks delivery time The Vetus STAFIN07B is a marine stabilizer fin set consisting of two AISI 316 stainless-steel fins with a total area of 0.7 m². Designed for installation below the waterline on both sides of the hull, each fin operates through a 24 V hydraulic system with computer-controlled angle adjustment, significantly reducing roll and pitch on steel, GRP, or aluminum vessels. The fins measure 1318 mm in length, making them suitable for yachts requiring enhanced stability in rough sea conditions.
|
$ 22,636.37
-
+
| ||
|
1-2 weeks delivery time The Vetus STA24VA is a complete electric stabilizer system set designed for marine hydraulic roll-stabilization. It includes two cast-steel fin actuator housings with cylinders, yokes, a roll sensor, hydraulic pressure block, control panel, connection box, couplings, grease pump and consumables, as well as full installation documentation. The system runs on a 24-volt supply and is suitable for integration into onboard hydraulic systems to significantly reduce roll on yachts and motor vessels.
|
$ 23,052.61
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1028S is a compact 20-liter hydraulic storage tank system designed for vessels without an existing hydraulic network, supplying stabilizers with the required hydraulic power, steering and control integration. It is configured for pumps with a fixed stroke volume (HT1029) and 24 V valves, with optional versions available for load-sensing pumps and 12 V valves.
|
$ 4,426.93
-
+
| ||
|
1-2 weeks delivery time The Vetus STATHS is a set of two through-hull fittings specifically designed for mounting stabilizer fins on steel-hulled vessels. Intended for use in hydraulic stabilizer installations, the set forms the sealed structural interface between the fin actuators and the vessel’s hull, ensuring secure and stable assembly of the stabilizer system.
|
$ 4,259.90
-
+
| ||
|
1-2 weeks delivery time The Vetus STATHA is a set of two through-hull fittings engineered for the installation of stabilizer fins on aluminum-hulled vessels. Designed for hydraulic stabilizer systems, these components provide a strong, watertight structural interface that supports proper alignment and secure mounting of fin actuators on both sides of the hull.
|
$ 4,092.86
-
+
| ||
|
1-2 weeks delivery time The Vetus STATHG is a set of two through-hull fittings designed for installing hydraulic stabilizer fins on GRP (fiberglass) hulls. Serving as the structural and watertight interface between fin actuators and the vessel, this set ensures correct alignment, secure mounting and reliable function of stabilizer systems on both sides of the hull.
|
$ 3,424.08
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1018 is a hydraulic power-steering pump delivering 95 cm³ per revolution, intended for use with steering cylinders up to model MT230. It reduces helm effort to approximately 10 % of non-powered steering, offering precise and smooth hydraulic steering control — ideal for larger motor yachts and vessels needing reliable, low-effort helm operation.
|
$ 2,488.59
-
+
| ||
|
1-2 weeks delivery time The Vetus HT1019 is a 24-volt solenoid control unit designed for hydraulic power-steering systems and inboard autopilot integration. It provides automatic hydraulic flow switching, enabling smooth transition between manual helm input and autopilot steering control. A 12-volt version is available on request, making the unit adaptable to different onboard power configurations.
|
$ 3,415.33
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.