Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus RECON handheld remote control (article: RECON) is designed for operating bow and stern thrusters, windlasses, gangways, electric cranes, hydraulic steering systems and similar onboard equipment. It features a 20 A rocker switch, supports both 12 V and 24 V DC systems, and includes a 3.5-meter spiral cable with a watertight plug and socket. A stainless steel hanger loop is mounted on the rear for secure storage when not in use.
|
$ 315.20
-
+
| ||
|
1-2 weeks delivery time The Vetus CANVWRC wireless remote system (article: CANVWRC) enables control of up to two onboard devices such as bow/stern thrusters or a thruster and windlass. Suitable for Vetus BOW PRO and DC thrusters, it features 8–30 V DC supply, 10–25 m operational range, detachable antenna, and IP66 watertight transmitter. The system includes a base unit, one remote controller, and two WRCCAB connection cables, offering quick installation via DC thruster loom sockets and V-CAN connectors. Full-power control is provided for BOW PRO thrusters (non-proportional).
|
$ 717.95
-
+
| ||
|
1-2 weeks delivery time The Vetus WRCKF key fob (article: WRCKF) is an additional wireless handheld remote for use with the Vetus WRCBS receiver system, enabling control of bow thrusters, stern thrusters, and/or windlasses from a distance of up to 25 meters. It is powered by a 3V CR2032 battery and protected to IP66, providing reliable performance in harsh marine environments. Suitable as an extra or replacement transmitter for vessels equipped with WRC remote systems.
|
$ 99.67
-
+
| ||
|
1-2 weeks delivery time The Vetus VDSETT V-DOCKER kit (article: VDSETT) provides a complete joystick-based maneuvering system for vessels equipped with a single mechanically controlled engine combined with standard tunnel bow and stern thrusters. The pressure-sensitive joystick enables precise boat positioning, replacing the traditional throttle lever and allowing single-handed operation. The system includes joystick, actuator, CAN hub modules, security module, cables, and termination hardware. Designed for retrofit installations, compliant with leading marine electrical and EMC standards, and rated IP65.
|
$ 5,437.18
-
+
| ||
|
1-2 weeks delivery time The Vetus V-DOCKER system (article: V-DOCKER) is a complete sail-by-wire joystick control kit designed for boats with a single mechanically operated engine and standard retractable bow and stern thrusters. The pressure-sensitive joystick enables precise thrust coordination between the engine and thrusters, eliminating drift and allowing effortless single-handed maneuvering. This retrofit-friendly system supports multiple helm stations and includes all required components. Rated IP65 and built to major marine compliance standards.
|
$ 4,735.39
-
+
| ||
|
1-2 weeks delivery time The Vetus VDJOY joystick (article: VDJOY) is an additional pressure-sensitive control unit for the V-DOCKER maneuvering system, designed to coordinate engine power with bow and stern thrusters from multiple helm stations. It enables precise joystick operation of the V-DOCKER sail-by-wire system on vessels with a single mechanically controlled engine and bow/stern thruster configuration, making it ideal for retrofit installations and for adding extra control positions on board.
|
$ 2,081.12
-
+
| ||
|
1-2 weeks delivery time The Vetus VDIO (article: VDIO) is an I/O interface module that enables a standard tunnel thruster to be integrated into a V-CAN bus network for digital maneuvering control. It acts as a bridge between non-CAN thruster hardware and CAN-based systems such as V-DOCKER, allowing centralized control, multi-station operation, and upgrade of existing installations without replacing the thruster.
|
$ 408.81
-
+
| ||
|
1-2 weeks delivery time The Vetus VDACT actuator unit (article: VDACT) is an essential component of the V-DOCKER maneuvering system, responsible for converting joystick and CAN-bus commands into coordinated control of the propulsion engine and thrusters. Designed for vessels with a single mechanically controlled engine and bow/stern thrusters, it enables smooth sail-by-wire operation, multiple helm stations, and retrofit installation without major modifications to existing equipment.
|
$ 1,928.90
-
+
| ||
|
1-2 weeks delivery time The Vetus BPCANIN module (article: BPCANIN) is an additional CAN-bus interface designed for integration of tunnel thrusters into V-CAN based maneuvering systems. It enables digital communication between the thruster control equipment and the onboard CAN network, expanding installation flexibility and supporting multi-station control configurations in both retrofit and new vessel applications.
|
$ 340.53
-
+
| ||
|
1-2 weeks delivery time The Vetus BPSM control panel (article: BPSM) is a side-mount thruster control for bow or stern thrusters, equipped with an illuminated on/off switch and a rocker-style direction switch. Designed for a Ø102 mm mounting diameter and 79 mm installation depth, the panel provides simple and reliable thruster control where proportional control and time-delay functions are not required. It offers IP65 watertight protection at the front for safe outdoor helm installation.
|
$ 309.14
-
+
| ||
|
1-2 weeks delivery time The Vetus BPTD12 time delay unit (article: BPTD12) is designed for use with 12-volt bow thruster control panels BPSM and BPJSTA. It prevents damage by delaying direction reversal commands, eliminating the risk of switching the thruster too quickly from port to starboard or vice versa. Especially recommended for charter and rental vessels to ensure safe thruster operation and protect the motor.
|
$ 260.64
-
+
| ||
|
1-2 weeks delivery time The Vetus BPTD24 time delay unit (article: BPTD24) is designed for 24V bow thruster control panels BPSM and BPJSTA, preventing rapid direction switching that may damage the motor. It automatically delays reverse activation to ensure safe operation and is highly recommended for hire craft, training vessels, or any boat with multiple operators.
|
$ 260.64
-
+
| ||
|
1-2 weeks delivery time The Vetus BP29 connection cable (article: BP29) is a 6-meter pre-terminated control cable featuring multi-plug connectors, designed for easy plug-and-play installation between Vetus bow or stern thruster panels and Vetus electric or single-stage hydraulic thrusters. It ensures secure communication and reliable control system performance without custom wiring.
|
$ 101.70
-
+
| ||
|
1-2 weeks delivery time The Vetus BP2910 cable (article: BP2910) is a 10-meter pre-terminated control connection cable equipped with multi-plug connectors, designed for plug-and-play installation between Vetus thruster control panels and Vetus electric or single-stage hydraulic thrusters. It ensures secure and reliable control signal transmission over extended distances, making it suitable for larger vessels or installation layouts requiring additional routing length.
|
$ 132.68
-
+
| ||
|
1-2 weeks delivery time The Vetus BP2916 control cable (article: BP2916) is a 16-meter pre-terminated connection cable designed for connecting Vetus bow or stern thruster control panels to compatible electric or single-stage hydraulic thrusters. Equipped with molded multi-plug connectors, it provides reliable signal transfer and allows long-distance routing across larger vessels without custom wiring work.
|
$ 167.03
-
+
| ||
|
1-2 weeks delivery time The Vetus BP2918 cable (article: BP2918) is an 18-meter plug-and-play control connection cable for linking Vetus bow or stern thruster panels to electric or single-stage hydraulic thrusters. It features pre-installed multi-plug connectors on both ends to ensure secure signal transmission and long-distance installation flexibility on larger vessels.
|
$ 196.67
-
+
| ||
|
1-2 weeks delivery time The Vetus BP2920 connection cable (article: BP2920) is a 20-meter pre-terminated control cable designed for reliable connection between Vetus thruster control panels and Vetus electric or single-stage hydraulic thrusters. Featuring molded multi-plug connectors at both ends, it allows secure long-distance routing on larger vessels without additional wiring work.
|
$ 202.05
-
+
| ||
|
1-2 weeks delivery time The Vetus BPMAIN12 (article: BPMAIN12) is a 12-volt remotely operated battery main switch designed for high-current equipment such as bow thrusters, anchor windlasses and other powerful DC consumers. It can be operated electrically from the supplied control panel or manually via the built-in red emergency stop knob. Rated for 250 A continuous and up to 800 A for 3 minutes, it must be installed in the negative (-) cable as close to the battery as possible for maximum safety.
|
$ 1,196.82
-
+
| ||
|
1-2 weeks delivery time The Vetus BPMAIN24 (article: BPMAIN24) is a remotely operated 24-volt battery main switch designed for high-current consumers such as bow thrusters, stern thrusters, and windlasses. It provides remote ON/OFF switching from a supplied control panel and manual emergency shutdown via a red stop button. With a 250 A continuous rating and 800 A for 3 minutes, it must be installed in the negative cable close to the battery bank for optimal safety and performance.
|
$ 1,196.82
-
+
| ||
|
1-2 weeks delivery time The Vetus BPMEC extension cable (article: BPMEC) is a 6-meter cable designed for use with BPMAIN remote battery main switch systems. It allows the control panel to be positioned further from the battery switch location, supporting flexible installation layouts on vessels with multiple stations or greater distances between helm and power compartments.
|
$ 112.47
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.