Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus HS212 stud branch tee fitting is a precision-engineered connector for fluid system installations using a 1/4" BSP connection and 8–8 mm tube outer diameter interfaces. Supplied as a spare part for Vetus marine steering systems, this tee connector is intended to create a secure branch connection within the linework.
|
$ 33.51
-
+
| ||
|
1-2 weeks delivery time The Vetus HS213 union tee coupling is a chromed brass tee connector built for 10mm tubing and specified as a spare part for Vetus marine steering systems. It uses compression fittings for 10mm HHOSE6 and HHOSE8 hoses and is stated as compatible when used with HS1031MS or HS1037MS fittings.
|
$ 28.71
-
+
| ||
|
1-2 weeks delivery time The Vetus HS214 stud branch tee fitting is a brass connection component with a 1/4" BSP threaded interface, specified for 10mm tube installations in marine tubing systems. Supplied as a spare part for Vetus marine steering systems, it is intended to provide a secure, corrosion-resistant, leak-proof tee connection and is described as easy to install with standard tools.
|
$ 16.27
-
+
| ||
|
1-2 weeks delivery time The Vetus HS215 union tee coupling assembly is a steel tube-fitting component for 12mm tube fluid systems, providing a branched connection from a main fluid line into two directions. Built from steel, it is specified for secure connections and efficient fluid distribution and is listed under spare parts for Vetus marine steering systems.
|
$ 17.23
-
+
| ||
|
1-2 weeks delivery time The Vetus HS216 stud branch tee fitting is a 3/8" BSP threaded branch tee intended for tubing with a 12 mm outer diameter (12–12 mm). Specified for marine and industrial fluid handling use, it supports distribution and connection of hydraulic, pneumatic, and fluid transfer lines and is listed under spare parts for Vetus marine steering systems; the component is described as being made from high-quality, corrosion-resistant materials.
|
$ 22.97
-
+
| ||
|
1-2 weeks delivery time The Vetus HS22S compression spring set is a spring component supplied as a set of five for the MT45-50 pump, specified with a 10 mm diameter, 1.25 mm wire thickness, and 50 mm length. Listed as “MT50 Old Mode,” it is provided as a spare part for Vetus marine steering systems to deliver the required tension and support within the pump assembly.
|
$ 17.23
-
+
| ||
|
1-2 weeks delivery time The Vetus HS2518S cutting ring (olive) set is a pack of 5 precision-engineered rings for T-piece (T-connection) installations in fluid systems, specified for 1/8 Gas connections (MT25SET). Supplied as a spare part for Vetus marine steering systems, these cutting rings are intended to provide secure, efficient sealing and retention at the T-connection interface.
|
$ 7.66
-
+
| ||
|
1-2 weeks delivery time The Vetus HS37N gasket and seal kit is a replacement seal set for Vetus marine steering systems, specified for MTP pumps used in MT 20-140 steering system applications. The kit is described as a gasket + seal kit for MTP30-140 and includes essential gaskets and seals to support correct sealing of the helm pump assembly.
|
$ 34.94
-
+
| ||
|
1-2 weeks delivery time The Vetus HS40 parallel key component is a replacement wedge/key for hydraulic steering systems using Vetus HTP and HTPR steering pumps. It is specified at 4.76 x 4.76 x 15.875 mm and is intended to provide a secure fit for correct pump-to-drive engagement in marine steering pump applications.
|
$ 10.05
-
+
| ||
|
1-2 weeks delivery time The Vetus HS410 cylinder seal gasket set is a sealing kit intended for the MT110, supplied as a set of seals for the cylinder to support reliable sealing performance in hydraulic systems. Listed as spare parts for Vetus marine steering systems, the HS410 is specified as compatible with MT110 installations and is described as a comprehensive set of cylinder seals.
|
$ 19.15
-
+
| ||
|
1-2 weeks delivery time The Vetus HS420 cylinder seal kit is a set of essential seals intended for the MT140 cylinder, specified to prevent leakage and support proper functioning of the cylinder system. It is listed as a spare part for Vetus marine steering systems and is described for marine and industrial applications.
|
$ 19.15
-
+
| ||
|
1-2 weeks delivery time The Vetus HS50 piston rod assembly is a stainless steel hydraulic component for Vetus MT45/65 systems, specified with a 534 mm length and stepped diameters of 15.85 mm and 34.7 mm. Manufactured from corrosion-resistant AISI 304 stainless steel with a polished finish, it is intended for high-pressure marine hydraulic duty up to 150 bar and operation from -40°C to +150°C, with a stated net weight of 0.84 kg and overall dimensions of 35 x 534 x 40 mm.
|
$ 57.44
-
+
| ||
|
1-2 weeks delivery time The Vetus HS51 piston rod assembly is a precision-engineered spare part for MT 80 marine steering systems. It is specified at 19.05 x 39.5 x 550 mm and is intended for marine applications where a piston rod component is required within the steering system hardware.
|
$ 76.58
-
+
| ||
|
1-2 weeks delivery time The Vetus HS800 sealing ring is a seal helm unit for the old model control pump, specified with dimensions of 25x47x7. This component is intended to provide an effective hydraulic seal to support system integrity and reliable operation in Vetus marine steering system applications, with MT50 and MT75 referenced for use.
|
$ 24.79
-
+
| ||
|
1-2 weeks delivery time The Vetus HS801 sealing ring assembly is a shaft seal component intended for hydraulic pump applications, specifically stated for the MTP model. The input specifies the seal as 25 x 42 x 7 mm, and also references 25 x 42 x 6 in the designation line; it is supplied as a spare part for Vetus marine steering systems and is described as providing a secure seal to support reliable hydraulic pump operation.
|
$ 12.44
-
+
| ||
|
1-2 weeks delivery time The Vetus HS802 sealing component is engineered for the helm unit used in Vetus MT100 and B150 series steering systems, providing a seal interface intended to protect against water ingress while maintaining smooth helm operation. Listed as a spare part for Vetus marine steering systems, it is specified for MT100 and B150 helm unit applications.
|
$ 6.70
-
+
| ||
|
1-2 weeks delivery time The Vetus HS803 dynamic hydraulic sealing component is a Type 360 seal for Vetus B-Series helm units used in hydraulic steering systems, specified for MTP151 and MTP191 compatibility. It is manufactured from a high-strength, corrosion-resistant elastomeric rubber compound in black, with a seal size of 35 x 55 x 10 mm (full unit dimensions 54 x 54 x 15 mm) and a net weight of 0.02 kg; stated operating limits include up to 150 bar and a temperature range of -30°C to +120°C, with resistance noted for oil, water, and marine chemicals.
|
$ 17.42
-
+
| ||
|
1-2 weeks delivery time The Vetus HS805 paper seal component is a 150mm sealing element intended for Vetus marine steering pump models MTP063 and MTP089. It is used to provide a reliable, tight seal to help prevent leaks and support correct steering pump system performance, supplied as a spare part for Vetus marine steering systems.
|
$ 9.58
-
+
| ||
|
1-2 weeks delivery time The Vetus HS813 rubber component set is a spare parts kit comprising essential rubber parts for the Vetus MT100 system used in marine steering applications. The set is intended to support system performance and durability as part of Vetus marine steering system maintenance.
|
$ 47.86
-
+
| ||
|
1-2 weeks delivery time The Vetus HS818 rubber component set is a collection of sealing elements for the B1300 series within Vetus marine steering systems, intended to restore sealing integrity and operational efficiency when replacing worn or damaged parts. The set includes various rubber seals and gaskets, O-rings for sealing applications, and additional B1300-specific rubber parts manufactured from high-quality rubber materials for resistance to marine and industrial conditions.
|
$ 138.79
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.