Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970315431 bearing case cover is a precision-fit closing element for the crankshaft bearings assembly, helping protect the bearing area and maintain correct retention and alignment in the lower-end structure. Designed for use on Nanni Diesel 3.100HE and 4.150HE engines, it supports reliable crankshaft bearing operation in demanding marine duty.
|
$ 192.06
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315453 crankshaft metal element No. 1 is a precision engine component used within the crankshaft and pistons assembly to support smooth rotating operation and stable alignment under load. Designed as a direct-fit replacement for Nanni Diesel 3.100HE and 4.150HE marine engines, it helps maintain dependable bottom-end performance and service reliability.
|
$ 230.12
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315520 fastening bolt is a dedicated hardware element used within the fuel filter assembly to keep the filter components securely clamped during engine operation. Designed for OEM-correct fit on T4.270, T4.230, and T4.205 Standard engines, it supports leak-resistant fuel system service by maintaining proper retention of the fuel filter assembly parts under vibration.
|
$ 14.17
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315604 rubber sealing washer is a combined washer-and-seal element used within the turbocharger and exhaust mixer assembly to help maintain tight, vibration-resistant joints. Designed for Nanni T6 marine diesel applications, it supports secure fastening and helps reduce the risk of leakage around connected components on T6.420TDI and T6.300 engines.
|
$ 5.35
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315607 crankshaft lip seal is a sealing element used in the crankshaft and main bearing assembly to help keep engine oil contained at the rotating shaft interface. Designed for N3.21 Standard engines, it supports clean, reliable operation by maintaining a tight seal where the crankshaft passes through the engine housing.
|
$ 99.21
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315619 140A Type B1 fuse is a protective electrical element for the electrics system, designed to safeguard key circuits against overload and short-circuit conditions. Built for dependable OEM fit on T4.270, T4.230, and T4.205 Standard engines, it helps maintain reliable power distribution and reduces the risk of electrical damage onboard.
|
$ 2.96
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315620 80A Type B1 fuse is a protective electrical element used in the electrics system to safeguard key circuits from overcurrent events. Designed for OEM-fit replacement on Nanni T4 series engines, it helps maintain reliable power distribution and wiring protection on T4.270, T4.230, and T4.205 Standard engines.
|
$ 3.60
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315621 40A Type B1 fuse is a protective electrical element used in the electrics system to help safeguard circuits from overloads. Designed for Nanni T4.270, T4.230, and T4.205 Standard engines, it supports dependable power distribution by interrupting the circuit when excessive current is present.
|
$ 2.74
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315622 20A blade-type fuse is a protective electrical element used in the electrics system to safeguard wiring and components against overcurrent. Designed for reliable OEM-style replacement on Nanni T4 series installations, it supports the electrical protection needs of T4.270, T4.230, and T4.205 Standard engines.
|
$ 5.37
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315713 intercooler body is a core structural component of the air cooler assembly used on N4.85 and N4.100 engines. It forms the main housing that supports the intercooler section, helping route charge air through the cooling circuit for stable intake-air temperatures and dependable engine operation in marine service.
|
$ 2,921.25
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315724 timing gear case gasket provides a secure seal for the timing gear case assembly on N4.65 engines. Designed as an OEM-style replacement, it helps keep the gear case properly sealed to support clean, reliable operation and protect internal timing components from leaks that can compromise performance.
|
$ 118.20
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315796 straight locating pin is a precision fastener used within the crankshaft and pistons assembly to help position and secure related components during operation. Designed for correct OEM fit on N4.65 engines, it supports reliable alignment in the rotating assembly where consistent placement is essential for smooth mechanical performance.
|
$ 6.26
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315806 flywheel fastening bolt is built to secure the flywheel within the flywheel assembly on N4.65 engines. It helps maintain a rigid, vibration-resistant connection between the flywheel and the crankshaft interface, supporting reliable power transmission to the drivetrain in marine operating conditions.
|
$ 60.63
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315945 wastegate hose assembly supports accurate turbocharger wastegate control on N4.115 marine diesel engines. Installed as part of the turbocharger system, this hose assembly routes the control pressure signal needed for stable boost regulation, helping protect the turbocharger and maintain consistent engine response under varying load.
|
$ 246.67
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315946 turbocharger clamp secures turbocharger connections to help maintain a tight, stable joint under heat, vibration, and boost pressure. Positioned within the turbocharger assembly on N4.115 engines, this fastening component supports reliable airflow routing and helps reduce the risk of leaks that can affect engine response and efficiency.
|
$ 29.65
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315963 injector nozzle holder assembly supports secure mounting and correct positioning of the injector nozzle within the injection nozzles and pipes system on N4.65 engines. Designed as an OEM-fit replacement, it helps maintain stable fuel delivery connections and reliable injector operation for consistent marine engine performance.
|
$ 17.21
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316046 screw is a securing fastener used on both the heat exchanger and the timing gear case assemblies, helping keep critical engine components firmly clamped under vibration and thermal cycling. Designed for OEM fit on Nanni 3.100HE and 4.150HE marine diesel engines, it supports reliable retention of covers and interfaces where maintaining alignment and sealing is essential.
|
$ 5.07
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316072 gasket is a sealing element used within the speed control assembly to help maintain a tight, leak-resistant interface at the control components on Nanni T4 series marine diesel engines. Designed for the speed control system, it supports dependable throttle and governor-related operation on T4.270, T4.230, and T4.205 Standard engines.
|
$ 37.22
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316104 diesel fuel filter element supports clean, consistent fuel delivery by removing contaminants before they reach sensitive fuel-system components. Used within the fuel filter assembly, it helps protect pumps and injectors on T4.270, T4.230, and T4.205 Standard engines for dependable marine operation.
|
$ 119.07
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316107 straight plug is a compact sealing element used in the crankcase and cylinder block area to close off a machined port and help maintain proper oil and internal circuit integrity. Designed as an OEM-fit replacement within the crankcase and cylinders assembly for T4.270 and T4.230 engines, it also fits T4.205 Standard engines where the cylinder block requires this straight plug configuration.
|
$ 53.83
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.