Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970315047 timing gear case gasket is a sealing element for the timing gear case assembly, helping protect the front gear train area by maintaining a tight joint at the timing case cover. It is used on N2.14 engines and on N3.21 engines (from Serial No. KTC08050772), including N3.21 Standard engines, to support clean, leak-controlled operation around the timing case.
|
$ 81.57
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315049 injection pump spacing shim (0.175 mm) is a precision adjustment element used within the injection and feed pumps assembly on N2.14 engines. It helps set correct pump positioning during service work, supporting accurate fuel system setup and consistent engine operation.
|
$ 23.05
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315050 injection pump shim (0.350 mm) is a precision spacing element used within the injection and feed pumps assembly to help set correct pump positioning and alignment. Designed for N2.14 engines, it supports accurate fuel system setup for consistent injection performance and reliable operation.
|
$ 16.88
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315051 injection pipe is a precision line used within the glow plug assembly to support dependable cold-start operation on N2.14 engines. Built for correct routing and secure connection in the starting-aid system, it helps maintain consistent delivery where it is required for reliable engine starting and smooth warm-up.
|
$ 219.22
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315052 injection pipe is a precision fuel line used within the glow plug assembly on N2.14 marine diesel engines. It supports clean, controlled fuel delivery within the injection system layout, helping maintain consistent starting and running performance with an OEM-correct fit.
|
$ 219.75
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315054 complete cylinder head assembly is a direct replacement component for the cylinder head system on N3.21 marine diesel engines. Supplied as a complete cylinder head, it restores the critical top-end structure that supports valve train operation and combustion sealing, and it is intended for engines from engine number KTC08050772 onward, including N3.21 and N3.21 Standard applications.
|
$ 5,167.93
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315056 crankcase assembly forms the core structural housing within the crankcase and cylinders assembly, supporting correct alignment and protection of key internal engine components. Built as an OEM replacement part for Nanni Diesel N4.40 and N4.50 marine engines, it helps maintain the integrity of the engine’s lower-end architecture for dependable operation underway.
|
$ 28,202.01
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315057 timing gear case assembly supports secure, accurate operation of the engine timing case by housing and protecting the timing gear train. Designed for Nanni Diesel N4.40 and N4.50 marine engines, it helps maintain alignment and shielding of critical timing components for dependable engine performance.
|
$ 3,336.58
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315058 flange bolt is a dedicated fastening element used in the timing case and timing gear case, helping secure covers and mating components so the timing drive area stays accurately aligned and protected. Built for OEM-style fit on Nanni N4 series engines, it is specified for N4.40, N4.50, and N4.65 applications to support dependable service work and clean, vibration-resistant assembly.
|
$ 7.79
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315059 flange bolt is a dedicated engine fastener that secures components within the timing case area for dependable gear-train alignment and vibration resistance. Used in the timing case or timing gear case assembly, it is a direct-fit replacement for N4.40, N4.50, and N4.65 engines to support clean, secure reassembly during service work.
|
$ 13.91
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315060 flange bolt is a dedicated timing case fastener that provides secure, vibration-resistant clamping for critical front-engine components on Nanni marine diesel engines. Used within the timing case and timing gear case assemblies, it helps maintain correct alignment and sealing of the timing cover area on N4.40, N4.50, and N4.65 engines.
|
$ 16.45
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315063 complete cylinder head assembly is a direct-fit replacement component for the cylinder head system on N4.50 marine diesel engines. Designed to restore proper valve and combustion chamber function, it supports reliable compression sealing and stable engine operation under continuous marine loads.
|
$ 8,207.46
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315064 cylinder head sealing gasket is built to maintain a tight seal between the cylinder head and engine block in the cylinder head assembly. Used on Nanni Diesel N4.50 and N4.65 engines, it helps preserve compression and supports stable coolant and combustion-gas separation for dependable marine engine operation.
|
$ 584.46
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315065 cylinder head gasket is a precision sealing element for the cylinder head assembly, helping maintain stable compression and separation of combustion gases and engine coolant. Designed for OEM-fit service on N4.50 and N4.65 marine diesel engines, it supports dependable operation during heavy-load running and repeated thermal cycles.
|
$ 554.92
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315066 cylinder head sealing gasket is a precision-fit component for the cylinder head assembly, helping maintain combustion compression and proper sealing between the cylinder head and engine block. Designed for Nanni N4.50 and N4.65 marine diesel engines, it supports dependable operation by protecting the sealing interface exposed to heat, pressure, and coolant flow.
|
$ 586.77
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315067 cylinder head sealing gasket supports a tight, stable joint between the cylinder head and engine block for dependable combustion and fluid sealing. Positioned within the cylinder head assembly, it is the correct OEM replacement for N4.50 and N4.65 engines, helping maintain compression and protect the cooling circuit under marine operating loads.
|
$ 614.11
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315068 cylinder head sealing gasket supports a tight, stable joint between the engine block and cylinder head within the cylinder head assembly. Specified as a 1.35 gasket for N4.50 and N4.65 engines, it helps maintain combustion sealing and protects coolant and oil passages for dependable marine engine operation.
|
$ 551.77
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315070 inlet valve is a precision valvetrain component used within the valves and springs assembly to control fresh-air intake into the combustion chamber. Designed for reliable seating and stable airflow at operating speed, it supports clean engine breathing and consistent performance on N4.40 and N4.50 marine diesel engines.
|
$ 182.65
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315071 exhaust valve is a precision valvetrain component built for the Valves and Springs assembly, helping control exhaust-gas flow from the combustion chamber for clean, efficient engine breathing. Designed for an OEM-fit replacement on Nanni Diesel N4.40 and N4.50 engines, it supports dependable sealing and consistent performance under marine-duty temperatures and loads.
|
$ 148.51
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970315072 camshaft assembly is a timing-train component for the camshaft system, designed for N4.50 marine diesel engines built after Serial No. KTH08040182. It supports accurate valve timing by driving the valve gear in sync with crankshaft rotation, helping maintain smooth operation and consistent engine performance.
|
$ 2,990.09
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.