Section Nanni Diesel Parts offers a wide range of genuine engine parts and services for Nanni Diesel engines. Whether you need routine maintenance or specific replacement parts, we provide quality solutions to keep your Nanni engine running smoothly. Our comprehensive list of parts covers a wide category, ensuring that we have what you need to maintain the performance and reliability of your engine. Explore our offerings and please contact us for more information on the services we offer.
|
1-2 weeks delivery time The Nanni Diesel 970316134 stud bolt is a cylinder head fastening element designed to clamp critical mating surfaces securely within the cylinder head assembly. Used on T4.270, T4.230, and T4.205 Standard engines, it helps maintain consistent head-to-block retention under thermal cycling and engine load for dependable sealing and long-term reliability.
|
$ 12.28
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316135 water temperature sensing element supports accurate coolant temperature monitoring on the cylinder head assembly of T4 series marine diesel engines. By feeding water temperature data to the engine’s instrumentation and protection logic, it helps maintain correct operating temperature and supports early warning of overheating on T4.270, T4.230, and T4.205 Standard engines.
|
$ 752.71
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316138 crankshaft sub-assembly is a core rotating component within the crankshaft and pistons assembly, converting piston motion into smooth rotational output for the drivetrain. Built as an OEM replacement for T4.270, T4.230, and T4.205 Standard engines, it supports stable power delivery and dependable bottom-end operation under marine load.
|
$ 16,830.08
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316140 flywheel sub-assembly is a crankshaft-mounted rotating mass within the crankshaft and pistons system that smooths engine pulses and supports stable power delivery under load. Built for OEM-level fit in the crankshaft pistons assembly, it matches Nanni T4 series applications including T4.270, T4.230, and T4.205 Standard engines.
|
$ 4,146.49
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316141 hex head bolt with captive washer is a crankshaft-and-pistons assembly fastener that delivers secure, vibration-resistant clamping in the engine’s rotating and reciprocating group. Designed for OEM-fit service work on Nanni T4 series engines, it supports reliable retention of critical components on T4.270, T4.230, and T4.205 Standard marine diesel engines.
|
$ 52.89
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316144 flange bolt is a precision engine fastener used within the crankshaft and piston assembly, helping maintain secure clamping under cyclic loads and vibration. Designed for dependable OEM fit, it supports proper retention of critical rotating components on T4.270, T4.230, and T4.205 Standard engines.
|
$ 10.86
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316145 standard piston ring set is a precision ring pack used within the crankshaft and pistons assembly to support stable compression, controlled oil film management, and efficient combustion in marine diesel operation. Designed for OEM-fit replacement on T4.270, T4.230, and T4.205 Standard engines, it helps restore piston-to-cylinder sealing performance for consistent power and dependable running under load.
|
$ 3,495.31
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316146 oversize 0.5 piston ring set is a matched ring kit used within the crankshaft and pistons assembly to restore sealing at the piston-to-cylinder interface. Designed for T4.270, T4.230, and T4.205 Standard engines, it helps maintain strong compression control and supports stable oil regulation for dependable marine engine performance.
|
$ 4,212.59
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316147 oversize 0.75 piston ring set is a precision ring pack used in the crankshaft and piston assembly to help restore proper sealing at the piston-to-cylinder interface. Designed for T4.270, T4.230, and T4.205 Standard engines, it supports strong compression control and stable oil management for dependable marine diesel performance.
|
$ 4,212.59
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316148 oversize piston ring set (1.0) is a precision sealing kit for the piston and cylinder interface, helping restore compression control and oil regulation in the crankshaft and pistons assembly. Designed for T4.270, T4.230, and T4.205 Standard engines, this ring set supports efficient combustion and stable engine performance under marine operating loads.
|
$ 4,212.59
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316149 cylinder head sealing gasket is an OEM-fit component for the cylinder head assembly, built to maintain a secure seal between the cylinder head and engine block. Designed for Nanni T4 marine diesel applications, it supports stable compression and helps keep coolant and combustion gases properly separated on T4.270, T4.230, and T4.205 Standard engines.
|
$ 974.18
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316150 cylinder head gasket is a sealing element for the cylinder head assembly, designed to maintain a tight interface between the cylinder head and engine block in Nanni marine diesel applications. Built for reliable combustion and coolant sealing, it fits T4.270, T4.230, and T4.205 Standard engines.
|
$ 974.18
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316151 cylinder head sealing gasket is built to maintain a tight joint between the cylinder head and engine block, supporting stable compression and fluid separation in the cylinder head assembly. Designed as an OEM replacement for Nanni T4 engines, it fits T4.270, T4.230, and T4.205 Standard engines for dependable service in demanding marine duty.
|
$ 974.18
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316159 piston sub-assembly with pin is a standard-size rotating-group component used in the crankshaft and pistons assembly to support smooth reciprocating motion and dependable combustion sealing. Designed as an OEM replacement for T4.270, T4.230, and T4.205 Standard engines, it helps restore correct piston-to-connecting-rod articulation and reliable engine operation under marine duty cycles.
|
$ 2,868.69
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316160 standard piston sub-assembly with pin is a crankshaft and piston-group component that supports efficient power transfer from combustion to the crankshaft. Supplied as a piston unit with its pin for accurate fit and smooth reciprocating motion, it is used in the crankshaft pistons assembly on T4.270, T4.230, and T4.205 Standard engines.
|
$ 2,868.69
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316161 standard piston assembly with pin is a complete piston-and-pin unit used in the crankshaft and pistons assembly to support smooth reciprocating motion and dependable combustion sealing in the cylinder. Designed as an OEM replacement for T4.270, T4.230, and T4.205 Standard marine diesel engines, it helps restore correct piston function during an overhaul or internal engine repair.
|
$ 2,868.69
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316162 piston sub-assembly with pin is a complete piston-and-pin unit used in the crankshaft and piston group to support smooth reciprocating motion and dependable compression in marine diesel operation. Supplied as an oversize 0.5 option, it is applied within the crankshaft pistons assembly for T4.270, T4.230, and T4.205 Standard engines.
|
$ 3,403.72
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316164 oversize piston and pin assembly is a matched replacement component used within the crankshaft and pistons assembly (Crankshaft pistons p.12) to restore correct piston-to-bore fit during engine rebuilding. Supplied as a piston sub-assembly with wrist pin, it supports smooth reciprocating operation and consistent compression on T4.270, T4.230, and T4.205 Standard marine diesel engines.
|
$ 3,439.12
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316165 connecting rod sub-assembly provides a dependable mechanical link between the piston and crankshaft for smooth power transfer in the crankshaft and pistons assembly. Designed for T4.270, T4.230, and T4.205 Standard engines, it supports stable reciprocating motion and helps maintain efficient, balanced operation under marine diesel loads.
|
$ 2,361.05
-
+
| ||
|
1-2 weeks delivery time The Nanni Diesel 970316168 flange nut is a secure fastening element used within the injection and fuel pump assembly to help maintain stable mounting and alignment of fuel-system components. Designed for OEM-fit replacement on T4.270, T4.230, and T4.205 Standard engines, it supports dependable clamping under marine-engine vibration and helps keep the fuel delivery hardware properly secured.
|
$ 12.75
-
+
| ||
What specific components are included in the range of Nanni Diesel Marine Engine Parts?
The range of Nanni Diesel engine parts encompasses a comprehensive selection of components essential for maintaining and servicing Nanni Diesel engines. These parts typically include fuel filters, oil filters, air filters, gaskets, belts, impellers, water pumps, alternators, starters, injectors, and exhaust systems. Each component is engineered to meet the highest quality standards and specifications set by Nanni Diesel, ensuring optimal performance and reliability for marine engines.